5
This product is a remote control panel for controlling HD
CAMERA RECORDER(GY-HD250/GY-HD251/GY-HD200/
GY-HD201).
Scene File Feature
You can assign different settings to each of the five Scene
File buttons and save them accordingly.
This is useful at job sites where speed is required, as you
can recall the settings according to the shooting conditions
by pressing the relevant button.
Self-illuminating Indicator
Buttons that are enabled are indicated in green, allowing you
to identify the usable features easily.
A button that is selected lights up in orange, allowing you to
identify the current camera settings easily.
In addition, the buttons and switches are also appropriately
arranged according to their frequency of use.
Iris F-value Display
The iris F-value of the camera is indicated on the remote
control.
This enables you to perform accurate adjustment by grasping
the iris condition at real-time.
Location of Storage and Use
䢇Do not place this product at the following locations.
Doing so may cause the product to malfunction or break down.
●Hot or cold places beyond the allowable operating
temperature range of -5 ⬚C to +40 ⬚C.
●Humid places beyond the allowable humidity range of
30 % RH to 80 % RH (non-condensing).
●Places in the vicinity of a strong magnetic field, such as
near transformers or motors.
●Near equipment that emit radio waves, such as
transceivers or mobile phones.
●Places that are subject to dust or sand.
●Places that are subject to strong vibrations.
●Places that are susceptible to condensation, such as
near windows.
●
Places that are subject to vapor or oil, such as kitchens.
●
Places that emit radioactive rays or X-rays, and corrosive gases.
䢇
Noise may occur in the images or their colors may change
when this product and the cable that is used to connect it are
used at a place that is subject to strong radio or magnetic
waves (e.g., near radios, TVs, transformers, or monitors).
Handling Precautions
䢇Insufficient ventilation may result in malfunction of this
product. Make sure that objects placed around this
product do not obstruct its ventilation.
䢇
Do not place containers with water (e.g. vases, flower pots, cups,
toiletry products, or chemicals) on top of this product. Moisture
that enters this product may cause fire or electric shock.
Moving the Product
䢇Remove connection cables before moving this product
When moving this product, do so after turning off the
power of the connected camera, and make sure that you
unplug the cable from the camera. Failure to do so may
damage the cable or cause fire or electric shock.
Maintenance
䢇Turn off the power of the connected camera before
performing maintenance of this product.
䢇Use a soft cloth to wipe the product. Do not wipe using
thinner or benzene, as doing so may cause the surface to
melt or turn cloudy. When there is significant soiling, wipe
using a cloth by dipping it in a neutral detergent that is
diluted with water, followed by cleaning using a dry cloth.
Energy Conservation
䢇When this product is not to be used for a prolonged period
of time, turn of the power of the system for safety and
energy conservation purposes.
Features
How to read this manual
䡵Definition of Symbols
Note : Precautions that need to be taken during
operation.
Memo : Details for reference, such as features and
restrictions during use.
A: Page or item to refer to.
䡵Descriptions in this manual
●The copyright of this manual belongs to Victor Company
of Japan, Limited. Reproduction or duplication of a part
or the whole of this manual without permission is
prohibited.
●Product names of other companies contained in this
manual are the trademark or registered trademark of the
respective companies. Symbols such as 姠, 姞, and 姝are
omitted in this manual.
●Designs, specifications, and other details contained in
this manual may be modified for improvement without
prior notice.
Precautions During Use
