JVC KV-PX9S - EXAD 20GB GPS Navigation System Technisches Handbuch
KV-PX9S/KV-PX9B/KV-PX9SN/KV-PX9BN
Update Instructions
This is the instructions for updating the firmware and
software on KV-PX9, HDD Portable Navigation.
The items below will be updated by this update:
• KV-PX9 firmware
• Map data
–The U.S., U.S. Virgin Islands, Puerto Rico, Hawaii, Alaska and Canada consisting of
Detailed City and RNC totaling 6,139,994 miles of coverage
–15,298,684 POIs (Points of Interest)
* The “Recreation” →“Zoo” subcategory in POI (Point Of Interest) will be removed and all its entries
will be moved to “Recreation” →“Others” subcategory after this update is completed.
[Important]
• 2 GB free space is required on the AV Player area on the built-in HDD.
See page 3 for checking the free space.
• The maximum space of the AV Player area will become 3 GB after the
update.
Preparations ....................................................................2
LVT1900-001A
Update ..............................................................................4
Step 1: firmware update ...............................................4
Step 2: map database update ......................................7
Confirming the software version of KV-PX9...............13
Table of Contents
English
Française
Español
2
Preparations
To update the KV-PX9 firmware and software, the supplied two DVD-ROMs (KV-PD902) and the equipment
below are required.
2 GB (2000 MB) or more free space is required on the AV Player area on
the built-in HDD.
DISC 1:
/NKUS2000.NB0 (Update file for of the KV-PX9 firmware)
/DB/Px9hddSetup.exe (Update program for KV-PX9 map data)
/Manual/Manual.pdf (Instructions for the update (this pdf))
/DB/Parts/px9part_000.cab, ..., px9part_010.cab (11 files) (Map data)
DISC 2:
/DB/Parts/px9part_011.cab, px9part_012.cab (Map data)
/DB/poicab.cab (POI data).
To perform the update it is necessary to use an AC adapter (Output: DC
5V, 2A) and a USB cable (USB A plug – Mini USB plug).
USB cable and AC adapter may not be included with your model. In that
case you may use commercially available a USB cable and an AC adapter
or purchase JVC KV-K1016 POWER KIT by calling JVC Customer Care
Center at 1-800-252-5722 or at JVC web site
http://www.jvcservice.com/Store/.
Blank 128 MB, 256 MB or 512 MB, FAT formatted SD card (FAT 32 is NOT
compatible) and SD card reader/writer is also required on your PC.
OS: Microsoft®Windows®XP
CPU: Intel Pentium/Celeron family, AMD K6/Athron/Duron family, or their
compatible one (Pentium 4 2.02 GHz or higher is recommended)
Memory: 512 MB or more
HDD: 2.0 GB free space is required.
Others: DVD-ROM drive and USB terminals (USB 2.0 is strongly
recommended)
Microsoft, Windows, are either trademarks or registered trademarks of Microsoft Corporation in the United States and other
countries.
Other names of systems and products mentioned in these instructions are usually the registered trademark or trademarks of the
manufacturers who developed the system or product concerned.
KV-PX9
DVD-ROMs
(KV-PD902)
PC
SD card
USB cable
AC adapter
3
Preparations (Continued)
Checking the free space on the KV-PX9 built-in HDD
1. Turn on the power.
2. Press AV button.
3. Press Menu to select “Install AV Files.”
4. Check the free space indication.
If the free space is smaller than 2 GB, delete files installed on the “Delete files” menu until the free space becomes larger
than 2 GB.
For the “Delete files” menu, refer to the on-screen help of KV-PX9.
4
1. Copy the file “NKUS2000.NB0” from DISC 1 on to the SD card on your PC.
2. Disconnect the AC adapter from the unit and insert the SD card into the SD card slot.
Update
Step 1: firmware update
DISC 1
NKUS2000.NB0
[Important]
• Make sure that the format of the SD card is FAT. Refer to the Windows help for the detail of checking the format
and changing the format of the SD card.
• Delete all files and folders on the SD card.
• Refer also to the quick guide of KV-PX9 for the power supply and the handling of an SD card.
• Once the firmware update is started, the unit cannot be used until completing the update of the firmware
and map data.
NKUS2000.NB0
Continued to the next page
Copy
5
3. Slide the battery switch to “OFF.”
4. While pressing and holding the button, connect the AC adapter.
Update starts. The power lamp flashes purple and red and the firmware update status is displayed on the screen as
follows. DO NOT do any operation while updating.
• It takes about 10 minutes to update the firmware. “complete” appears on the screen display as the update successfully
finished.
• If “error” appears on the display screen, disconnect the AC adapter and check whether the file you copied and the
format of the SD card are correct.
Please call JVC Customer Care Center at 1-800-252-5722 if you cannot update the firmware even after the checking.
Update (continued)
OFF
Continued to the next page
Hold
“updating” flashes on and off. If an error occurs. Update finished.
7
1. Connect the AC adapter to the unit.
Update (continued)
Continued to the next page
DISC 1
Px9hddSetup.exe
Step 2: map database update
AC adapter
[Important]
• Make sure to update the KV-PX9 firmware before proceeding to the steps below.
• Make sure to disconnect any other USB device than KV-PX9 from your PC before starting update.
• Quit all programs on your PC before starting the update.
• The time for updating varies depending on the specification of your PC. It takes about 40 minutes when
updating on a PC with Pentium IV 2.02 GHz and 1 GB memory, for example.
• Make sure that the AC power is supplied to the Unit and your PC to avoid the accidental interruption of the
update process.
• DO NOT interrupt the update after starting the update program. If interrupted, try to update the database
again.
8
2. Press button to turn on the power.
“Information” appears on the display screen.
3. Connect the unit to your PC using a USB cable.
• Quit all programs on your PC.
• Cancel the autoplay window when it appeared on your PC after connecting the unit.
• Select “Take no action” and click “OK” on the window below.
Update (continued)
Continued to the next page
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Sprachen:
Andere JVC GPS Handbücher
JVC
JVC KV-PX501 Bedienungsanleitung
JVC
JVC KW-NT310 Bedienungsanleitung
JVC
JVC KW-NT810HDT Bedienungsanleitung
JVC
JVC KW-NT3E Bedienungsanleitung
JVC
JVC KW NX7000 - Double Din Navigation Leitfaden
JVC
JVC KW-NT500HDT Bedienungsanleitung
JVC
JVC KW-NT3HD Bedienungsanleitung
JVC
JVC KW-NT810HDT Bedienungsanleitung
JVC
JVC KW-NT3HDT Bedienungsanleitung
JVC
JVC KVPX9BN - EXAD eAvinu - Automotive GPS... Bedienungsanleitung
JVC
JVC KW-NT1 - Navigation System With DVD player Bedienungsanleitung
JVC
JVC MultiMediaNavigator Bedienungsanleitung
JVC
JVC KW-NT800HDT Bedienungsanleitung
JVC
JVC KW-NT1 - Navigation System With DVD player Bedienungsanleitung
JVC
JVC KW-NT50HDT Bedienungsanleitung
JVC
JVC KV-PX701 Bedienungsanleitung
JVC
JVC KW-NT50HDT Bedienungsanleitung
JVC
JVC KW-NT1 - Navigation System With DVD player Bedienungsanleitung
