JVC AV-29SX28 Bedienungsanleitung

COLOUR TELEVISION

INSTRUCTIONS

AV-29SX28

AV-29SX18

GGT0240-001B-H

Safety precautions ............................... 2

Connections

......................................... 3

TV buttons and functions ..................... 3

Remote control buttons and

basic functions ..................................... 4

Initial settings ....................................... 5

Registering / Editing channels ............. 5

PREPARATION

Picture setting ...................................... 6

Sound setting ...................................... 6

Useful functions ................................... 7

Teletext operation ................................ 9

Watching Video or DVDs ................... 10

CH/CC List ..........................................11

Troubleshooting ................................. 12

Speciﬁcation ...................................... 13

FUNCTIONS

REFERENCE

Contents

ENGLISH

POWER

Thank you for buying this JVC colour television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

CAUTION TO ENSURE PERSONAL SAFETY, OBSERVE THE

FOLLOWING RULES REGARDING THE USE OF

THIS TV.

• Operate only

from the

power source

indicated on

the rear of the

TV.

• Avoid damaging the power cord

and main plug. When unplugging

the TV, grasp the main plug. Do

not pull on the power cord.

• This TV can be

turned on/off power

by connecting/

disconnecting the

AC plug into AC

outlet. While this TV is being

installed, enough space should

be reserved for connection/

disconnecting the AC plug into

AC outlet by hand.

WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

• Never block or cover the ventilation openings.

• Never install the TV where good ventilation is unattainable.

• When installing this TV, leave spaces for ventilation around

the TV of more than the minimum distances as shown.

• The apparatus

shall not be

exposed to

dripping or

splashing and that no objects filled

with liquids, such as vases, shall be

placed on the apparatus.

• Do not allow

objects or liquid

into the cabinet

openings.

• The surface of the TV screen is easily

damaged. Be very careful with it when

handling the TV. Should the TV screen

become soiled, wipe it with a soft dry cloth.

Never rub it forcefully. Never use any

cleaner or detergent on it.

In the event of a

fault, unplug the unit and

call a service technician. Do

not attempt to repair it yourself

or remove the

rear cover.

• Never listen to headphones at high volume!

- It may damage your hearing.

CAUTION Ensure to turn off all equipments including the TV before

connecting the AC main plug to the AC outlet.

Connections TV buttons and functions

Video and audio input jacks for VIDEO-3 mode

Remote control sensor TV’s main power on/off

Power lamp - Indicates the TV’s status.

No colour: TV’s main power is being turned off.

Red: TV’s main power is turned on.

Blink: While the TV is in standby mode, ON TIMER function is in used.

While the TV is in turn on mode, OFF TIMER function is in used.

VHF/UHF

outdoor

aerial

Rear of VCR

Connecting to the aerial cable and VCR

(Connect

directly if not

using a VCR)

RF output

(Connect via a VCR)

RF input

TV rear terminals

Connecting to the front video input terminal

Camcorder or TV game

Headphones

After all the

connections

have been

made, insert the

main plug to the

AC outlet.

• When connecting to

COMPONENT (VIDEO-2)

input, depending on the

connection, choose the

appropriate video input using

the menu (\ page 10).

DVD player (with component video signals input)

VCR (for playing)

DVD player

(composite signals)

VCR (for recording)

Connecting to the rear component/video input terminal and output terminal

Aerial cable

Video output

Audio

output

Channel selection, To select menu function

Display the menu and exit after finish setting

Volume level adjustment, To choose a Top menu and

adjust the desired menu function

Headphone jack

75-ohm

coaxial

cable

(not

supplied)

ECO sensor

TV or Video terminal input selection, Exit from the menu

Remote control buttons and basic functions

COLOUR SOUND

SYSTEM

POWER

FAVORITE CHANNEL

MENU TV/VIDEO

DISPLAY MUTING

DVD MENU

ECO

BASS

CHANNEL VOLUME

-/--

RM-C1171

PICTURE PICTURE

BOOSTER MODE

CINEMA

SURROUND

SOUND

MODE



123

456

789

+ +

RETURN+

Turn the TV on from standby and vice versa

TV or video terminal input selection, Exit from the menu

Turn the volume Off / On

Programme number selection

For two digits :

Adjust the volume level, Turn off Muting

Channel selection

Select the desired channel number.

For Hyper Scan

Press and hold

RETURN PLUS function

Return to the frequently viewed channel.

PR changes without changing the

picture. Once you stop pressing

CHANNEL+ or CHANNEL– button,

picture will change to the desired PR.

• Insert two batteries by following the

and polarities and inserting the end

first.

• Use AA/R6/UM-3 dry cell batteries.

• If the remote control does not work

properly, fit new batteries. The supplied

batteries are for testing, not regular use.

WARNING:

Batteries shall not be

exposed to excessive heat

such as direct sunshine,

ﬁre or the like.

RETURN function

If you have not set or have cancelled the RETURN PLUS

channel, this will return to the previously viewed channel.

Press and hold

RETURN PLUS

PROGRAMMED!

Choose the channel you want to programme

FAVORITE CHANNEL

Programme and recall 4 favourite channels

(colour buttons: red, green, yellow, blue)

Choose the TV channel you wish to programme

Press and hold

any button

PROGRAMMED! ■

Repeat to programme another favourite channel.

To recall the favourite channel,

press the corresponding colour button.

• When the TV is in Text function or MENU mode,

the favourite channel function is not available.

Press and hold

RETURN PLUS

CANCELED!

To cancel

If this symbol

is shown, it is

only valid in

the European

Union.

• Display the programme or video terminal number.

• To return to the previous menu

Initial Settings Registering / Editing channels

TEXT LANGUAGE

GROUP-1

GROUP-2

GROUP-3

GROUP-4

MENU : EXIT

DISPLAY : BACK

OK / : SELECT

AUTO PROGRAM

10%

/ : EDIT

COLOUR SYSTEM PAL

AUTO PROGRAM

MENU SET UP

EDIT / MANUAL

TEXT LANGUAGE

LANGUAGE

MENU : EXIT

OK / : SELECT

MENU TV/VIDEO

CH 02

CH 05

CH 06

CH 07

CH 08

CH 04

CH 03

EDIT

PR CH/CC

MENU : EXIT

MOVE DELETE

MANUAL

INSERT

FRANÇAIS

LANGUAGE

ENGLISH

MENU : EXIT

DISPLAY : BACK

OK / : SELECT



ﻲﺑﺮﻋ

ﯽﺳﺭﺎﻓ

INSERT / DELETE

CH 02

CH 05

CH 06

CH 07

CH 08

CH 04

EDIT

PR CH/CC

CH03

DISPLAY : BACK

STORE

CH 02

CH 05

CH 06

CH 07

CH 08

CH 04

EDIT

PR CH/CC

MENU : EXIT

DISPLAY : BACK 0-9

CH/CC

- -

CH 02

CH 05

CH 06

CH 07

CH 08

CH 04

CH 03

EDIT

PR CH/CC

MENU : EXIT

SYSTEM

SEARCH+

FINE-

SEARCH-

FINE+

4. Searching for the channels (AUTO PROGRAM)

1. Turn on the TV.

5. Check what was registered.

3. Select the Teletext language group.

1. Select “SET UP”

1. Select item.

2. Set or adjust.

You can edit the channel list or register new channel manually.

1. Display “SET UP” menu.

2. Select item.

To complete

Setup Tour

• If you want to edit channel, read the next column.

2. Start to use

“SET UP” menu

MOVE MOVE a channel position.

INSERT / DELETE a channel.

• Delete a channel by press

(Yellow)

button.

MANUAL Register a new channel.

(Blue)

• Channel ﬁne tunning

(Yellow)

(Blue)

• If the sound is unnatural ➡ for select sound system.

1. Beginning channel search

From high

frequencies

From low

frequencies

(Red)

(Green)

or wait 15 seconds to run

Setup Tour

JVC logo appears.

2. Select a language.

1. Select item

2. Set

To restart Setup Tour after above setup has completed.

(While the cursor is pointing to

PICTURE MODE and hold for 3 seconds)

1. Select a CH/CC 2. Enter a number

0-9 buttons then,

receives the

broadcast signal.

• “CH/CC List” (P. 11)

1. Select item

2. Set

To stop or wait until AUTO

PROGRAM finishes

3. Enter

1. Select

2. Move Finish

Picture Setting

1. Display “PICTURE” menu.

Sound Setting

1. Select “SOUND”

2. Start to use

“SOUND” menu

• To return the sound setting to default, press the Blue button.

“MaxxAudio” is a registered trademark of Waves Audio Ltd. in the USA, Japan

and other countries.

PICTURE SETTING

VNR OFF

WHITE BALANCE NORMAL

MENU PICTURE

MENU : EXIT

PICTURE MODE USER

/ : SELECT

MaxxBass

USER

MaxxAudio

MaxxTreble

BALANCE

MaxxStereo

MENU SOUND

MENU : EXIT

/ : SELECT

AI VOLUME OFF

CINEMA SURROUND OFF

PICTURE MODE

You can choose the desired picture setting.

USER :

You can change this picture setting as you like.

(

CONTRAST, BRIGHT, SHARP, COLOUR, TINT

)

VIVID : Heightens contrast and sharpness.

SOFT : Softens contrast and sharpness.

SHARP : To sharpen the picture. (For DVD mode)

CLEAR : To softens the picture. (For DVD mode)

PICTURE SETTING

You can adjust the desired picture setting when

selecting USER in PICTURE MODE.

CONTRAST : Lower Higher

BRIGHT : Darker Brighter

SHARP : Softer Sharper

COLOUR : Lighter Deeper

TINT : Reddish Greenish

•

To return the setting to default, press the Blue button.

WHITE BALANCE

When DVD THEATER

STATUS set to ON,

WHITE BALANCE is not

available in VIDEO-2.

You can change the white balance of the picture to

better match the type of video being viewed.

NORMAL : Normal white balance.

COOL : Bluish white.

WARM : Reddish white.

VNR

Only available in RF,

VIDEO-1 and VIDEO-3.

Reduce the amount of noise in original picture.

OFF : VNR is turned off.

AUTO : Effect of VNR is automatically controlled.

MIN : Effect of VNR becomes minimum level.

MAX : Effect of VNR becomes maximum level.

AI VOLUME Prevent sudden increase or decrease of sound when

changing channels. (ON / OFF)

MaxxAudio

You can enjoy the sound setting that you like.

OFF : MaxxAudio is turned off.

USER : Change the sound setting as you like.

(MaxxBass, MaxxTreble, MaxxStereo)

MUSIC : Emphasize on music effect.

THEATER : Emphasize on movie sound.

MaxxBass Compensates low frequencies to widen the frequency

band.

MaxxTreble Compensates high frequencies to widen the frequency

band.

MaxxStereo Expands the stereo sound naturally.

BALANCE You can change the speaker balance.

(Left Stronger Right Stronger)

CINEMA SURROUND

You can enjoy an enhanced sound for wider audience.

(ON / OFF)

1. Display “SOUND” menu.

2. Select item and setting or adjust.

1. Select item.

2. Set or adjust.

1. Select “PICTURE”

2. Start to use

“PICTURE” menu

3. Enter

BRIGHT

TINT

COLOUR

SHARP

PICTURE SETTING

CONTRAST

MENU : EXIT

DISPLAY : BACK

/ : SELECT RESET

1. Select item.

2. Set or adjust.3. Enter

Useful Functions

MENU FEATURES

MENU : EXIT

/ : SELECT

BLUE BACK OFF

BEEP OFF

PICTURE TILT

OFF TIMER

AI ECO SENSOR OFF

CHILD LOCK OFF

MENU FEATURES

ON TIMER

VIDEO-2 SETTING VIDEO

MENU : EXIT

OK / : SELECT

1. Select “FEATURES”

2. Start to use “FEATURES” menu

1. Display “FEATURES” menu.

ON TIMER

TV to turn on

automatically from

standby mode at a

set time.

1. Select PR channel that you want to watch.

2. Set the ON TIMER to your desired period of time.

You can set the period of time to a maximum of 12

hours in 15-minute intervals. To off the ON TIMER,

set ON TIMER to OFF.

Note : If TV is not in standby mode when ON

TIMER is reach the setting time, this case is

not available.

OFF TIMER

TV to turn off

automatically to

standby mode after

a set time.

You can set the period of time to a maximum of 120

minutes in 10 minutes intervals.

Note : When the remaining elapse time is

automatically to one minute, “GOOD

NIGHT!” appears on the screen.

CHILD LOCK Disables the side control buttons of the TV.

(ON / OFF)

AI ECO SENSOR

You can automatically adjust TV screen contrast

according to the brightness of your room to suitable

level for a better eyecare.

(OFF / MODE-1 / MODE-2 / DISPLAY )

• You can operate the ECO function by press

ECO

button.

BLUE BACK Display a blue screen and mute the sound when the

signal is weak or absent. (ON / OFF)

PICTURE TILT

You can correct the picture tilt caused by the earth’s

magnetic force.

2. Select item and setting or adjust.

1. Select item.

2. Set or adjust.3. Enter

PR 01

ON TIMER

ON TIMER 00:15

MENU : EXIT

DISPLAY : BACK

/ : SELECT

2. Set or adjust.

1. Select item

2. Set or adjust.

1. Select PR

channel

OFF TIMER 10

PICTURE TILT

MENU : EXIT

DISPLAY : BACK

1. Tilt the picture becomes level

To conﬁrm

1. Select a time in minutes

by press ( / ) button.

Useful Functions (continued)

BEEP

You can use the BEEP function to alert you during

AUTO SIGNAL DETECT, AI ECO SENSOR Detect,

Stereo Detect, ON TIMER / OFF TIMER

operations and when some buttons on the remote

control are pressed. (ON / OFF)

COLOUR SYSTEM

You can select the appropriate colour system when

the picture is not clear or no colour appears.

(RF mode : AUTO / PAL / SECAM / NTSC 3.58)

(VIDEO mode :

AUTO / PAL / SECAM / NTSC 3.58 /

NTSC 4.43)

1. Display “SET UP” menu.

• You can operate the COLOUR SYSTEM function

by press

COLOUR

button.

SOUND SYSTEM

You can select an appropriate sound system when

abnormal sound occurs even when the picture

appears normal.

(B/G, I, D/K, M)

• You can operate the SOUND SYSTEM function

by press

SOUND

button.

2. Start to use “SET UP”

1. Select “SET UP”

COLOUR SYSTEM PAL

AUTO PROGRAM

MENU SET UP

EDIT / MANUAL

LANGUAGE

TEXT LANGUAGE

MENU : EXIT

/ : SELECT

Colour and Sound system in your country or region.

Area Country or Region Sound

system

Colour

system

Asia,

Middle East

Bahrain , Kuwait, Oman, Qatar, United Arab Emirates,

Yemen, Indonesia, Malaysia, Singapore, Thailand,

India, etc.

B/G

PAL

China, Vietnam, etc. D/K

Hong Kong, etc. I

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G SECAM

Philippines, Taiwan, Myanmar, etc. M NTSC

Europe

Russia, etc. D/K SECAM

Czech Republic, Poland, etc.

PALGermany , Holland, Belgium , etc. B/G

UK, etc. I

Oceania Australia, New Zealand, etc. B/G PAL

Africa

Republic of South Africa, etc. I PAL

Nigeria, etc. B/G

Egypt, Morocco , etc. SECAM

You can watch the Teletext broadcast channel with TEXT functions.

1. TV mode ➝ TEXT mode ➝ MIX mode

TEXT

2. Select other Teletext pages.

OR OR

TEXT

TV/VIDEO

to return to the TV mode.

You can also operate the teletext using the following buttons:

Teletext operation

(Hold) Hold a teletext page.

To Cancel, press the button again.

(Reveal) Display the hidden text (example: answers to a quiz).

To Cancel, press the button again.

(Size) Enlarge the teletext display.

(Index) Return to the index page instantly.

(Cancel)

Watch TV programme while waiting for a teletext page.

When the teletext page is found, a page number

appears at the upper left of the screen.

Press the button to view the teletext page.

(Sub-page)

Sub-page numbers are displayed at the left of the

screen.

To cancel sub-page function, press the button again.

GROUP-1 English, German, Swedish, Finnish, Danish, Hungarian,

Italian, French, Spanish, Portuguese, Turkish

GROUP-2 Polish, German, Estonian, Slovenian, Czech, Slovakian,

Rumanian

GROUP-3 Polish, German, Estonian, Lettish, Russian, Ukrainian

GROUP-4 English, Polish, French, Turkish, Arabic, Farsi

1. Display “SET UP” menu.

1. Select “SET UP”

2. Start to use “SET UP”

2. Select item.

You can set the Teletext language group that corresponds to the programmes.

TEXT LANGUAGE

1. Select “TEXT LANGUAGE”

2. Set Text language group.

COLOUR SYSTEM PAL

AUTO PROGRAM

MENU SET UP

EDIT / MANUAL

TEXT LANGUAGE

LANGUAGE

MENU : EXIT

OK / : SELECT

• Only available AV-29SX28.

VIDEO-2 SETTING

OFF TIMER

AI ECO SENSOR OFF

CHILD LOCK OFF

MENU FEATURES

ON TIMER

VIDEO-2 SETTING VIDEO

MENU : EXIT

/ : SELECT

Switch between video and component

signal (VIDEO / COMPONENT)

1. Select “FEATURES” menu.

1. Select “VIDEO-2 SETTING”

2. Set to VIDEO or COMPONENT

2. Select “VIDEO-2 SETTING”. Then set to VIDEO or COMPONENT.

1. Select “FEATURES”

2. Start to use

“FEATURES” menu

AUTO SIGNAL DETECT Automatically change the input mode to

Video-2 when the DVD input signal is detected.

Automatically change the input mode to RF

previous input mode when the DVD input signal

is not detected. (ON / OFF)

DVD THEATER STATUS

Enjoy an enhanced picture quality for movie

playback in a dark room, like watching a movie in

the theater. (ON / OFF)

Function for watching DVDs

PICTURE SETTING

DVD THEATER STATUS ON

AUTO SIGNAL DETECT ON

DVD MENU PICTURE

MENU : EXIT

PICTURE MODE USER

/ : SELECT

Available for component signal only.

1. Select “DVD MENU PICTURE” menu.

1. Select item.

2. Set or adjust.

2. Select item and setting.

1. Select “DVD MENU

PICTURE”

2. Start to use

“DVD MENU

PICTURE” menu

Watching Video or DVDs

• When you set DVD THEATER STATUS set to ON, AI ECO SENSOR and

WHITE BALANCE adjustment become unavailable.

Only available in VIDEO-2 mode.

• You can operate the

DVD function by press

DVD MENU

button.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Fernseher Handbücher

JVC

JVC 50052496 Bedienungsanleitung

JVC

JVC AV28T20EP Bedienungsanleitung

JVC

JVC AV-32920 Bedienungsanleitung

JVC

JVC AV 14F704 Bedienungsanleitung

JVC

JVC AV-20F475S Bedienungsanleitung

JVC

JVC AV-20320/S Bedienungsanleitung

JVC

JVC AV-21W33 Bedienungsanleitung

JVC

JVC AV-20NN15 Bedienungsanleitung

JVC

JVC LT-46Z70BU Bedienungsanleitung

JVC

JVC 0803-CR-JMT Bedienungsanleitung

JVC

JVC 56028 Gebrauchs- und Wartungshandbuch

JVC

JVC AV-29TS4EE Bedienungsanleitung

JVC

JVC AV-28WFT1EPG Bedienungsanleitung

JVC

JVC COLOUR TELEVISON AV-29LS24 Bedienungsanleitung

JVC

JVC AV-21TS2EK Bedienungsanleitung

JVC

JVC AV-28Z25 Bedienungsanleitung

JVC

JVC AV-21VS21 Bedienungsanleitung

JVC

JVC AV-21F1P Bedienungsanleitung

JVC

JVC AV-32T4 Bedienungsanleitung

JVC

JVC AV-21YT15 Bedienungsanleitung

JVC

JVC AV-32D501 Bedienungsanleitung

JVC

JVC AV-21F9 Bedienungsanleitung

JVC

JVC AV-14AT Bedienungsanleitung

JVC

JVC AV-14FMT3, AV-21DMT3, AV-21LMT Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Philips

Philips Colour Television Bedienungsanleitung

Toshiba

Toshiba 27A10 Bedienungsanleitung

Philips

Philips 42PF9630A/37 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Philips

Philips Matchline 21CE7551 Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Philips

Philips 25PT4523-16 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Philips

Philips PR0930X3 Bedienungsanleitung

Philips

Philips Brilliance 231P4QPY Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Philips

Philips 32PFH5300 Bedienungsanleitung