Kärcher HDS 6/14 C Bedienungsanleitung

HDS 6/14 C

HDS 7/16 C

HDS 8/18-4 C

001

59668420 05/16

English

Русский

30 1322928

12 13

9 8

11 15

MIN

MAX

36 37

34 35

123

465

2.3.

4.5.

– 1

Please read and comply with

these original instructions prior

to the initial operation of your appliance and

store them for later use or subsequent own-

ers.

– Before first start-up it is definitely nec-

essary to read the operating instruc-

tions and safety indications Nr. 5.951-

949.0!

– In case of transport damage inform ven-

dor immediately.

– Check the contents of the pack before

unpacking. For scope of delivery see il-

lustration 1.

Notes about the ingredients (REACH)

You will find current information about the

ingredients at:

www.kaercher.com/REACH

DANGER

Pointer to immediate danger, which leads

to severe injuries or death.

몇WARNING

Pointer to a possibly dangerous situation,

which can lead to severe injuries or death.

몇CAUTION

Pointer to a possibly dangerous situation,

which can lead to minor injuries.

ATTENTION

Pointer to a possibly dangerous situation,

which can lead to property damage.

Contents

Environmental protection . . . . EN 1

Danger or hazard levels . . . . . EN 1

Overview. . . . . . . . . . . . . . . . . EN 2

Symbols on the machine. . . . . EN 2

Proper use . . . . . . . . . . . . . . . EN 3

Safety instructions. . . . . . . . . . EN 3

Safety Devices . . . . . . . . . . . . EN 3

Start up . . . . . . . . . . . . . . . . . . EN 4

Operation . . . . . . . . . . . . . . . . EN 6

Storage . . . . . . . . . . . . . . . . . . EN 8

Transport. . . . . . . . . . . . . . . . . EN 8

Care and maintenance . . . . . . EN 9

Troubleshooting . . . . . . . . . . . EN 10

Warranty . . . . . . . . . . . . . . . . . EN 11

Accessories and Spare Parts . EN 12

EU Declaration of Conformity . EN 12

Technical specifications . . . . . EN 13

Recurring tests . . . . . . . . . . . . EN 15

Environmental protection

The packaging material can be

recycled. Please do not throw

the packaging material into

household waste; please send it

for recycling.

Old appliances contain valuable

materials that can be recycled;

these should be sent for recy-

cling. Batteries, oil, and similar

substances must not enter the

environment. Please dispose of

your old appliances using appro-

priate collection systems.

Please do not release engine oil, fuel oil,

diesel and petrol into the environment Pro-

tect the ground and dispose of used oil in

an environmentally-clean manner.

Danger or hazard levels

23EN

– 2

Figure 1

1 Support for spray lance

2 Manometer

3 Recess for detergent suction hose

4 Recessed grip (both sides)

5 Connection for water supply with filter

6 Water supply set

7 High-pressure connection EASY!Lock

8 High pressure hose EASY!Lock

9 Spray lance EASY!Lock

10 High-pressure nozzle (stainless steel)

11 Steam nozzle (brass)

12 Pouring vent for detergent

13 Steering roller with fixed position brake

14 Fuel sieve

15 Safety lever

16 Power supply

17 Triggering lever

18 Tool bag

19 Safety latch of the hand spray gun

20 Trigger gun EASY!Lock

21 Pouring vent for fuel

22 Dosage valve for detergent

23 Operating field

24 Storage for hand spray gun

25 Step depression

26 Handle

27 Nameplate

28 Cover lock

29 Storage compartment for accessories

30 Burner

31 Recess for spray pipe

32 Cover

33 Fill opening for system care RM 110

34 Pressure/quantity regulation of the

pump unit

35 Oil tank

36 Oil drain screw

37 Backflow valve of the detergent infeed

38 Detergent suction hose with filter

39 Fuel filter

40 Fastening clamp

41 Hose (soft damping system) of the wa-

ter shortage safeguard

42 Water shortage safeguard

43 Sieve in the water shortage safeguard

44 Fine filter (water)

45 Float tank

Figure 2

A Power switch

1 Indicator lamp rotation direction

(3-phase appliances only)

2 “Ready for use” indicator lamp

3 Fuel indicator lamp

4 Indicator lamp service

5 Indicator lamp for detergent

6 Indicator lamp system care

– The operating elements for the cleaning

process are yellow.

– The controls for the maintenance and

service are light gray.

High-pressure jets can be dan-

gerous if improperly used. The

jet may not be directed at persons, animals,

live electrical equipment or at the appliance

itself.

Overview

Device elements Operating field

Colour coding

Symbols on the machine

Risk of electric shock!

Only electricians or authorised

technicians are permitted to

work on parts of the plant.

Risk of burns on account of hot

surfaces!

Risk of poisoning! Do not inhale

exhaust fumes.

24 EN

– 3

Cleaning of: Machines, Vehicles, Struc-

tures, Tools, Facades, Terraces, Garden-

ing tools, etc.

DANGER

Risk of injury! Follow the respective safety

regulations when operating at gas stations

or other dangerous areas.

Quality requirements for water:

ATTENTION

Only clean water may be used as high

pressure medium. Impurities will lead to in-

creased wear and tear or formation of de-

posits in the appliance and accessories.

If recycled water is used, the following limit

values must not be exceeded.

–Please follow the national rules and

regulations for fluid spray jets of the re-

spective country.

–Please follow the national rules and

regulations for accident prevention of

the respective country. Fluid spray jets

must be tested regularly and the results

of these tests must be documented in

writing.

–The heating appliance of the machine is

an ignition plant. All national laws and

regulations about heating systems must

also be followed.

–As per the applicable national guide-

lines, the first time this high-pressure

cleaner must be taken into operation by

a skilled person. KÄRCHER has al-

ready performed this initial start-up for

you and has documented it accordingly.

The documentation can be requested at

your KÄRCHER partner. Please have

the part and plant number of the appli-

ance available when enquiring about

the documentation.

–We would like to point out that the appli-

ance must be repeatedly checked by a

skilled person as prescribed by the ap-

plicable national regulations. Please

contact your KÄRCHER partner.

–The appliance/accessories must not be

modified.

Safety devices serve for the protection of the

user and must not be put out of operation or

bypassed with respect to their function.

– While reducing the water supply at the

pump head or with the Servopress -

regulation the overflow valve opens and

part of the water flows back to the pump

suck side.

– If the hand-spray gun is closed, so that

the whole water flows back to the pump

suck side, the pressure switch at the

overflow valve shuts down the pump.

Proper use

Please do not let mineral oil contaminated

waste water reach soil, water or the sew-

age system. Perform engine cleaning and

bottom cleaning therefore only on speci-

fied places with an oil trap.

pH value 6,5...9,5

electrical conductivity * Conductivity

fresh water

+1200 µS/cm

settleable solids ** < 0,5 mg/l

total suspended solids *** < 50 mg/l

Hydrocarbons < 20 mg/l

Chloride < 300 mg/l

Sulphate < 240 mg/l

Calcium < 200 mg/l

Total hardness < 28 °dH

< 50 °TH

< 500 ppm (mg

CaCO3/l)

Iron < 0,5 mg/l

Manganese < 0,05 mg/l

Copper < 2 mg/l

Active chloride < 0,3 mg/l

free of bad odours

* Maximum total 2000 µS/cm

** Test volume 1 l, settling time 30 min

*** no abrasive substances

Safety instructions

Safety Devices

Overflow valve with two pressure

switches

25EN

– 4

– If the hand spray gun is opened, the

pressure switch on the cylinder head

turns the pump back on.

The overflow valve is set by the manufac-

turer and sealed. Setting only by customer

service.

– The safety valve opens, when the over-

flow valve resp. the pressure switch is

broken.

The safety valve is set by the manufacturer

and sealed. Setting only by customer ser-

vice.

– The water shortage safeguard prevents

the burner to be turned on when there is

water shortage.

– A sieve prevents the contamination of

the safeguard and must be cleaned reg-

ular.

– The temperature stop switches off the

machine when the waste gases have

reached very high temperatures.

몇WARNING

Risk of injury! Appliance, accessories, sup-

ply lines and connections must be in fault-

free condition. If they are not in a perfect

state then the appliance must not be used.

Lock parking brake.

Figure 3

Screw tightening torque: 6.5-7.0 Nm

Figure 4

Hook the tool bag onto the top tabs on

the appliance.

Tilt the tool bag down and lock it into

place.

Fasten the tool bag with 2 screws

(torque: 6.5 - 7.0 Nm).

Note: 2 screws are left over.

Note: The EASY!Lock system joins com-

ponents with a quick-fasten thread solidly

and securely with just one turn.

Figure 5

Join the spray lance with the trigger gun

and tighten until hand-tight

(EASY!Lock).

Insert the high pressure nozzle onto the

spray lance.

Install union nut and hand-tighten it

(EASY!Lock).

Join the high-pressure hose with trigger

gun and high-pressure connection of

the appliance and tighten until hand-

tight (EASY!Lock).

– The system care prevents the calcifica-

tion of the heating spiral while operating

with calciferous tap water. It is dosed

into the supply in the float container

drop by drop.

– The metering is set to medium water ri-

gidity by the manufacturer

Note: A sample bundle of system care is in-

cluded.

Refill system care.

DANGER

Danger of explosion! Only refill diesel oil or

light fuel oil. Inappropriate fuels, e.g. petrol,

must not be used.

ATTENTION

Risk of damage! Never operate device with

an empty fuel tank. The fuel pump will oth-

erwise be destroyed.

Refill fuel.

Close tank lock.

Wipe off spilled fuel.

Safety valve

Water shortage safeguard

Temperature stop for exhaust gases

Start up

Installing the handle

Install the tool bag

Install the hand-spray gun, the jet

pipe, the nozzle and the high

pressure hose

Refill system care

Refill fuel

26 EN

– 5

DANGER

Risk of injury!

– Use Kärcher products only.

– Under no circumstances fill solvents

(petrol, aceton, diluting agent etc.)

– Avoid eye and skin contact.

– Observe safety and handling instruc-

tions by the detergent manufacturer.

Kärcher offers an individual cleaning

and care appliances program.

Your dealer will consult you gladly.

Refill detergent.

For connection values refer to technical

specifications.

Attach supply hose (minimum length

7.5 m, minimum diameter 3/4“) to the

water supply set by means of a hose

clamp.

Connect the supply hose to the water

connection point of the machine and at

the water supply point (for e.g. a tap).

Note: The supply hose and the hose clamp

are not included in the scope of delivery.

If you want to suck in water from an exter-

nal vessel, the following modification is

necessary:

Figure 6

Remove the two screws on the burner

casing.

Figure 7

Unscrew the back wall and remove it.

Figure 8

Remove water connection from the fine

filter.

Unscrew the fine filter from the pump

head.

Remove the system care reservoir.

Figure 9

Unscrew the top supply hose to the

swimmer container.

Connect the top supply hose at pump

head.

Replug the rinse line of the detergent

dosing valve to blind plugs.

Connect suction hose (minimum diame-

ter 3/4“) with filter (accessory) to the

water connection point.

– Max. suck height: 0.5 m

Until the pump sucked in water, you should:

Set the pressure/quantity regulation at

the pump unit to maximum quantity.

Close the dosing valve for the detergent.

DANGER

Risk of personal injury or damage! Never

suck in water from a drinking water contain-

er. Never suck in liquids which contain sol-

vents like lacquer thinner, petrol, oil or unfil-

tered water. The sealings within the device

are not solvent resistant. The spray mist of

solvents is highly inflammable, explosive

and poisonous.

Assembly in reverse order.

Note: Ensure that the solenoid valve cable

on the reservoir of the system care is not

pinched.

– For connection values, see technical

data and type plate.

– The electrical connections must be

done by an electrician according to IEC

60364-1.

DANGER

Risk of injury on account of electric shock!

–Unsuitable electrical extension cables

can be hazardous. Only use electrical

extension cables outdoors which have

been approved and labelled for this pur-

pose and have an adequate cable

cross-section.

–Always unwind extension lines com-

pletely.

–The plug and coupling of the extension

cable used must be watertight.

ATTENTION

The highest allowed net impedance at the

electrical connection point (refer to techni-

cal data) is not to be exceeded. In case of

confusion regarding the power impedance

present on your connection, please contact

your utilities provider.

Refill detergent

Water connection

Suck in water from vessel

Power connection

27EN

Andere Handbücher für HDS 6/14 C

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kärcher Bodenreinigungsmaschine Handbücher

Kärcher

Kärcher KM 70/30 C Bp Adv Bedienungsanleitung

Kärcher

Kärcher B 260 RI Bedienungsanleitung

Kärcher

Kärcher BDS 51/175-300 C Bedienungsanleitung

Kärcher

Kärcher BDS 43/180 C Bedienungsanleitung

Kärcher

Kärcher BD 43/35 C Ep Bedienungsanleitung

Kärcher

Kärcher KM 75/40 W P Bedienungsanleitung

Kärcher

Kärcher BRC 45/45 C Bedienungsanleitung

Kärcher

Kärcher K 970 Bedienungsanleitung

Kärcher

Kärcher B 60 W Bp Bedienungsanleitung

Kärcher

Kärcher Chariot 3 - CV 86/1 RS Bp Bedienungsanleitung

Kärcher

Kärcher 1.291-213 Bedienungsanleitung

Kärcher

Kärcher BRS 40/1000 C Bedienungsanleitung

Kärcher

Kärcher BD 50 C Ep Classic Bedienungsanleitung

Kärcher

Kärcher B 110 R Bedienungsanleitung

Kärcher

Kärcher HDS 7/9-4 M/MX Bedienungsanleitung

Kärcher

Kärcher BD 50/50 C Bp Classic Bedienungsanleitung

Kärcher

Kärcher KM70/20C Bedienungsanleitung

Kärcher

Kärcher BDP 43/400 C Bedienungsanleitung

Kärcher

Kärcher KM 120/250 R Bp Bedienungsanleitung

Kärcher

Kärcher B 150 R Bedienungsanleitung

Kärcher

Kärcher 1.186-120.0 Bedienungsanleitung

Kärcher

Kärcher BRC 46/76 W Bedienungsanleitung

Kärcher

Kärcher Professional B60/10CB Bedienungsanleitung

Kärcher

Kärcher BD 50/50 C Bp Pad AGM Bedienungsanleitung

Beliebte Bodenreinigungsmaschine Handbücher anderer Marken

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Bedienungsanleitung

Numatic

Numatic ET 4045 Bedienungsanleitung

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Bedienungsanleitung

Mytee

Mytee 8070 Mytee-Lite Bedienungsanleitung

Kärcher

Kärcher B 140 R Bedienungsanleitung

Triple S

Triple S Ace 26T1 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SW 750 Bedienungsanleitung

Tornado

Tornado Marathon 2000 98190 Handbuch

Windsor

Windsor ADMIRAL Admiral 8 Bedienungsanleitung

Numatic

Numatic TTB 1117/100 Bedienungsanleitung

Tennant

Tennant 8210D Bedienungsanleitung

Nobles

Nobles Frontier Produkthandbuch

lavina

lavina 21-X Bedienungsanleitung

KENT

KENT Edge 28B Bedienungsanleitung

Tennant

Tennant 215 Produkthandbuch

Windsor

Windsor BDP 51/2000C Bedienungsanleitung

CleanFreak

CleanFreak DURA-18HD Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Administratorhandbuch