K40 RL360i Bedienungsanleitung
K40 Consult
Don’t like to read manuals?
Call our experienced K40 Consultants.
We’ll explain the whole thin .
800.323.5608
K40 ELECTRONICS
600 Toll ate Rd., Suite A
El in, IL 60123
www.K40.com
3
ake-up Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Receiving Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Radar Alert Sequence . . . . . . . . . . . . . . . . . . . . . . . . . .5
Laser Alert Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Laser Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Non-Police Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Special Features/Functions . . . . . . . . . . . . . . . . . . . . . . . . .7-13
Dim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
City/Hwy/Filter (Sensitivity) . . . . . . . . . . . . . . . . . . . . . . . .7
Quiet Ride . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Mute Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Mark to Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Speed Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Customizable Settings . . . . . . . . . . . . . . . . . . . . .11-13
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15
arranty/Guarantees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Table of Contents
Your K40 RL360i/RL200i will be ready for use following this automatic
wake-up sequence:
1. Start your vehicle – The K40 is designed to turn on automati-
cally every time your vehicle is started.
2. Listen for Wake-Up Sequence – Both front and rear alert lights
in your dash will flash (K40 RL200i systems have one alert light).
The voice will announce “K40 Scan, Active” then you will hear
alerts for all bands.
NOTE: f you don’t hear wake-up sequence, press and release .
3. GPS Connection – After locating available satellites, the unit will
announce “GPS Connected”.
NOTE: f you are in a location that prevents connection with GPS
satellites (e.g. parking garage) your system will still protect you from
all radar/laser threats. Once you drive to an unobstructed location,
the GPS will connect and you will hear “GPS Connected”.
4
Wake-up Sequence
(us ng factory default sett ngs)
5
The K40 RL360i/RL200i provides a combination of audio and visual
alerts to warn you when radar is detected.
R d r Alert Sequence
Your K40 RL360i/RL200i detects all industry standard police radar
bands (X, K and Ka band). When a signal is detected:
•A voice alerts which band was identified. (This assumes the factory
default “Voice ON” setting has not been changed.)
•The K40 RL360i will announce the direction of the signal’s source,
either front or rear, along with the band detected. K40 RL200i
Radar Systems will only announce the band detected.
•Signal strength and proximity to the radar source will be identified
as a series of geiger-counter like tones. The faster the tone pattern,
the closer you are to the source. Each band has its own distinctive
tone.
L ser Alert Sequence
(only for K40 RL360 /RL200 Systems that nclude the Laser Defuser g5)
When the K40 RL360i/RL200i detects a laser signal:
•A voice announces “Laser.” (This assumes the factory default
“Voice ON” setting has not been changed.)
•You will then hear a distinct and urgent audio tone.
•LEDs will pulse rapidly.
Receiving Alerts
6
L ser Settings
The Laser Defuser g5 can be configured to one of three different
operational settings:
Laser Settings Description Recommended Use
Cons an Upon receiving a laser signal,
Transmi the Laser Defuser g5 will
continually transmit a jam-
ming signal for the duration
of the laser encounter. This is
the factory default setting.
Pulse Upon receiving a laser signal,
Transmi the Laser Defuser g5 will
transmit a jamming signal for
10 seconds and then cease
firing for the duration of that
encounter.
Receive Only The Laser Defuser g5 will only
detect laser. o jamming
signal will be emitted.
•For aggressive drivers at higher speeds.
•Gives the driver more time to decelerate.
•Higher potential for jamming all the
way to the laser gun location.
•For moderate to aggressive drivers.
•Gives the driver the time to check and
reduce speed to avoid a speeding
ticket, while allowing the police officer
to obtain a lower speed reading elimi-
nating suspicion of “jamming”.
•For notification only. Officer will get a
speed reading on your vehicle in this
setting.
Alerts from non-police sign ls
Your K40 RL360i/RL200i is sensitive enough to detect non-police sig-
nals generated by radar equipment. To learn how to minimize these
signals, please read about F LTER options (page 7) and Quiet Ride
function (page 8).
7
DIM
• Press and release on the remote control to adjust LED
brightness to accommodate various driving environments. Your set-
ting will automatically be saved with the exception of “Off”. The
“Off” setting will revert to “Auto” upon system wake-up.
The 5 options include:
1. “D y” (Br ght)
2. “Dusk” (Med um / factory default)
3. “Night”(D m)
4. "Auto” (LED’s adjust automat cally from 5 seconds n “Day”, 5 seconds
n “Dusk” and the durat on of the alert n “N ght”)
5. “Off” (No l ghts, st ll rece ve full aud o alerts)
CITY/HWY FILTER Oper tion
( .e. s gnal sens t v ty)
• Press and release on the remote control to change the
setting at any time.The K40 RL360i/RL200i offers 3 settings of
radar sensitivity to accommodate various driving situations.
Settings Sensitivity Recommended Use
1. Highway Detects all US industry stand- For highway travel or in any
(factory default ard police radar signals at full area in which you are unfam-
sensitivity. iliar with the types of radar
used.
2. Ci y Reduced X Band sensitivity. When traveling in an urban
(the most common source of area with minimal non-police
non-police radar) radar signals.
3. Fil er X Band off. Reduced K and When traveling in a congested
Ka Band sensitivity. traffic area with a high con-
centration of non-police
radar signals.
sett ng)
Special Features/Functions
DIM
CITY
HWY
8
Quiet Ride
The Quiet Ride function will automatically silence all radar / laser
alerts when traveling under a speed setting of your choice between
5 and 75 MPH in 5 MPH increments.
Visual alerts are unaffected by Quiet Ride settings.
The factory default setting for Quiet Ride is “Off”.
Activ ting / Adjusting Quiet Ride
• Press and release on the remote control to activate the
Quiet Ride menu. Quiet Ride will announce the current setting e.g.,
“Quiet Ride Off” or the current speed setting,“Quiet Ride, 25, 35...”.
•Use the or to adjust the speed settings on Quiet Ride.
Any selected speed setting indicates Quiet Ride is on.
•When you have made your desired Quiet Ride speed selections, stop
scrolling and Quiet Ride will announce, "Quiet Ride Set".
NOTE: Locations that you have “Marked to Alert” (page. 9) are un-
affected by Quiet Ride settings.
Mute Functions
• Press and release for 30 second mute (or duration of alert).
•Press and hold for 3 seconds to engage extended mute
(5 minutes or duration of alert).
• To turn the voice/tone audio alerts off: Press and release
until voice confirms “Volume Off”.
n both Mute settings and Volume Off settings, you will continue to
receive flashing visual alerts.
QUIET
RIDE
+
-
MUTE
MUTE
-
9
M rk to Alert
The Mark to Alert function allows you to add specific GPS locations
to your personal database, alerting you to any point of interest you
choose, such as construction zones, speed traps or red light cameras.
•Press and release on the remote control when you want to
mark a location for alert.
•A voice announces “Marked to Alert”.
n the future, you will be alerted as follows:
When you arrive… You will hear a…
…within a radius of 1500 feet ..."Approaching marked location"
of the marked location and the alert light(s) will flash twice
...at a marked location ...single “Bing” tone and the alert
light(s) will flash once
MA
To remove the previously marked location from your database:
•Press and release while in the marked location.
• To remove all stored locations: Press and hold for 10
seconds at any time.
MA
MA
10
Speed Monitor
The Speed Monitor function alerts the driver when a pre-selected
speed is exceeded, great for young drivers or accidental speeders.
The Speed Monitor can be set to any speed between 40-100 MPH
in 5 MPH increments.
The factory default setting for Speed Monitor is “Off”.
Activ ting / Adjusting Speed Monitor
•Press and release on the remote control to activate the
Speed Monitor menu. Speed Monitor will announce the current
setting e.g., “Speed Monitor Off” or the current speed setting,
“Speed Monitor, 40, 45...”.
•Use or to adjust the Speed Monitor speed setting. Any
selected speed setting indicates Speed Monitor is on.
•When you have made your desired Speed Monitor setting, stop
scrolling and Speed Monitor will announce “Speed Monitor Set”.
When driving nd the Speed Monitor speed is exceeded:
•The K40 RL360i/RL200i will emit a continuous “Bing Bong” tone
and the LED(s) will remain lit.
•The alerts will continue until the vehicle’s speed is reduced below
the Speed Monitor speed setting.
+
-
SM
Andere Handbücher für RL360i
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere K40 Radarwarngerät Handbücher
K40
K40 1000 Bedienungsanleitung
K40
K40 CALIBRE Bedienungsanleitung
K40
K40 RL360i Bedienungsanleitung
K40
K40 Defuser EX Bedienungsanleitung
K40
K40 RL200i Bedienungsanleitung
K40
K40 Defuser EX Bedienungsanleitung
K40
K40 RL200 Bedienungsanleitung
K40
K40 rd950 Bedienungsanleitung
K40
K40 1000 Bedienungsanleitung
K40
K40 CALIBRE DL Bedienungsanleitung
