Kaba Generation E-760 AUTO DEADBOLT ASM Office Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

6

Inhaltsverzeichnis

Andere Kaba Sperren Handbücher

Kaba

Kaba C-lever Bedienungsanleitung

Kaba

Kaba SIMPLEX LD450 Bedienungsanleitung

Kaba

Kaba Quantum Series Bedienungsanleitung

Kaba

Kaba La Gard MECHANICAL Bedienungsanleitung

Kaba

Kaba E-Plex 5x63 Bedienungsanleitung

Kaba

Kaba Simplex 8100 Series Bedienungsanleitung

Kaba

Kaba Simplex 6200 Series Bedienungsanleitung

Kaba

Kaba 7102 series Bedienungsanleitung

Kaba

Kaba Confidant RFID Kit 1 Bedienungsanleitung

Kaba

Kaba E-730 Series Bedienungsanleitung

Kaba

Kaba E-PLEX 2000 Bedienungsanleitung

Kaba

Kaba COMBOGARDPRO Bedienungsanleitung

Kaba

Kaba Gege Bedienungsanleitung

Kaba

Kaba SIMPLEX 900 Series Bedienungsanleitung

Kaba

Kaba PowerPlex 2000 Series Bedienungsanleitung

Kaba

Kaba Combi B 30 Bedienungsanleitung

Kaba

Kaba LA GARD COMBOGARDPRO Bedienungsanleitung

Kaba

Kaba E-PLEX 2000 Bedienungsanleitung

Kaba

Kaba 1435MID Bedienungsanleitung

Kaba

Kaba 4000 Bedienungsanleitung

Kaba

Kaba Simplex 1000 Series Bedienungsanleitung

Kaba

Kaba Simplex 6200 Series Bedienungsanleitung

Kaba

Kaba E-Plex 50 Series Bedienungsanleitung

Kaba

Kaba EX3600 Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung

Generation E-760 Installation Instructions

for Auto Deadbolt, Ofﬁce and Storeroom

STEPS FOR AUTO DEADBOLT ASM • MODELS 76016 & 76017

If not already installed at the factory, put the

thumbturn in the vertical position and install all four

(4)parts (M) as shown, on the inside trim assembly.

Turn the thumbturn all the way to the right for a RH

installation (arrow onM2points UP), or all the way

to the left for a LH installation (arrow onM2points

DOWN). The thumbturn should stop in the vertical

position, and the stopper cam (M2) will be in the posi-

tion illustrated.

Place 3 spacers (S) on the door (for recent models

only). Place the inside trim assembly on the door so

that the upper and lower spindles (F) and (G) engage

the thumbturn and the inside lever. Fasten to the

outside housing using the three 1/8” hex head

mounting screws (I).

Apply the privacy thumbturn sticker as shown. If

in doubt as to the direction of the arrow, press the

auxiliary latch (X) to extend the deadbolt, and verify in

which direction to rotate the thumbturn to reach the

horizontal (privacy) position.

M4

M1

M2

M3

Install clip

M1diagonally

on hub

(TOP)

RH

LH

RH/LHR LH/RHR

X

F

I

G

I

S

S

STEPS FOR ASM OFFICE • MODELS 76112 & 76113

DO THE FOLLOWING BEFORE PLACING THE INSIDE

TRIM ASSEMBLY ON THE DOOR:

Install only parts (M3and M4) as shown, on the

inside trim assembly.

STEPS FOR ASM/ESM STOREROOM • MODELS 76112, 76113, 76131

DO THE FOLLOWING BEFORE PLACING THE INSIDE

TRIM ASSEMBLY ON THE DOOR:

M4

M3

Install M3onto M4, then slide both parts

onto the thumbturn.

Install M2onto M4, then slide both parts

onto the thumbturn.

The thumbturn should be locked in the

vertical position.

M4

M1M2

PK2990/08/12 - GENERATION E-760 INSTALLATION INSTRUCTIONS

Call 1-877-468-3555

or 1-514-340-9025

Put the thumbturn in the vertical position and install

only parts (M2 and M4) as shown, on the inside trim

assembly. The notch on the stopper cam (M2) must

engage the tab on the plate (M4), so that the thumbturn

is locked in the vertical position.

Technical Support