KALATEL KTD-400 Bedienungsanleitung

KTD-400

Controller Keypad

Installation and Operation

Manual

2 1034790D / January 2001

KTD-400 Controller Keypad Installation and Operation Manual

ANY KALATEL SO TWARE SUPPLIED WITH KALATEL PRODUCTS IS PROPRIETARY AND

URNISHED UNDER LICENSE AND MAY BE USED OR COPIED ONLY IN ACCORDANCE

WITH THE TERMS O SUCH LICENSE.

This document contains proprietary information that is protected by copyright.

No part of this document may be reproduced or transmitted in any form or by any means without

the prior written permission of Kalatel, a division of Interlogix, Inc.

The information contained in this document is subject to change without notice. Kalatel, in keeping

pace with technological advances, is a company of product innovation. Therefore, it is difficult to

ensure that all information provided is entirely accurate and up-to-date. Kalatel accepts no

responsibility for inaccuracies or omissions and specifically disclaims any liabilities, losses, or

risks, personal or otherwise, incurred as a consequence, directly or indirectly, of the use or

application of any of the contents of this document.

For te hni al support before and after installation, all 800-469-1676.

Kalatel o ers 24-hr technical support 7 days a week.

Call: Te h Support 800-469-1676 (6 a.m. – 5 p.m. PST Monday through riday)

Te h Support 541-740-3589 (all other times)

Main 800-343-3358 or 541-754-9133

ax: Te h Support 541-752-9096 (available 24 hr a day)

Main 541-754-7162

Web: www.kalatel.com

1034790D / January 2001

KTD-400 Controller Keypad Installation and Operation Manual

Contents

Introdu tion ........................................................................................................................ 5

Controller Keypad Placement .............................................................................................................5

Installation .......................................................................................................................... 7

KTD-400 & KTD-300R ........................................................................................................................7

Setting the DIP Switch ..................................................................................................................7

Mounting the KTD-300R ...............................................................................................................7

Wiring Connections .......................................................................................................................8

Programming .................................................................................................................... 11

Initial Programming ........................................................................................................................... 11

KTD-400 Programming ..................................................................................................................... 11

Programming Choices for the KTD-400 ...................................................................................... 11

System Component Programming ................................................................................. 15

P/T/Z Receiver Programming ...........................................................................................................16

Accessing the Receiver Setup Menus ........................................................................................16

Receiver Setup ............................................................................................................................16

Setting Electronic Auto Pan Limits ..............................................................................................19

P/T/Z Receiver Preset Position Programming ..................................................................................19

Operation .......................................................................................................................... 21

Key Layouts ......................................................................................................................................21

Key unctions ...................................................................................................................................22

Site Select Keys ..........................................................................................................................22

Pan/Tilt/Zoom Control Keys ........................................................................................................22

Video Switcher Control Keys .......................................................................................................22

Multiplexer unction Keys ...........................................................................................................22

VCR Control Keys .......................................................................................................................23

Keypad Operation .............................................................................................................................24

Monitor Selection ........................................................................................................................24

Camera Selection ........................................................................................................................24

Engaging Auto ocus on CyberDomes .......................................................................................24

inding a Preset ..........................................................................................................................24

Preset Tours ................................................................................................................................24

Camera Sequencing ...................................................................................................................24

Setting Electronic Auto Pan Limits for Kalatel Domes ................................................................25

Video Alarms ...............................................................................................................................25

Clearing Alarms ...........................................................................................................................25

4 1034790D / January 2001

KTD-400 Controller Keypad Installation and Operation Manual

Multiplexer Operations ......................................................................................................................25

Switching to Multiplexer Control Mode ......................................................................................25

Selecting an Active Multiplexer ..................................................................................................26

Calling up a Video Input on an Active Multiplexer ......................................................................26

Switching a Multiplexer to Live Video ........................................................................................26

Placing the Active Multiplexer in the Camera Sequence Mode .................................................26

Viewing VCR Output or Playback ..............................................................................................26

Operating Electronic Zoom ........................................................................................................26

Selecting Multiple Camera Views on a Multiplexer ....................................................................26

VCR Operation ..................................................................................................................................26

Switching to VCR Control Mode ................................................................................................26

Selecting an Active VCR ............................................................................................................26

Appendix A: Warranty and Return Information.............................................................. 27

1034790D / January 2001

KTD-400 Controller Keypad Installation and Operation Manual

Introdu tion This manual covers installation and operation instructions for a KTD-400 series keypad. Designed

for use in a Digiplex™ system (see igure 1), the KTD-400 can address and control 512 pan/tilt/zoom

receiver sites, operate a matrix switcher with 64 monitor outputs, and address and select views from

as many as 64 multiplexers and VCRs. Several models of multiplexers are supported.

igure 2: Placement in a Digiplex System using a KTD-312 Signal Merger

igure 1: Placement in a Digiplex System

NOTE: This produ t was originally alled the KTD-300. It has been updated to the KTD-400.

Although the look of the KTD-400 has been modified, the fun tionality of both versions

remains the same, ex ept for DTMF ompatibility. If you are using a KTS-41A swit her in

your KTD-400 system, you will need to order a DTMF Upgrade Kit (item number

1034782). Instru tions in this manual referring to the KTD-400 are also appli able to the

KTD-300.

To operate and control multiplexers and VCRs, a KTD-93 Auxiliary Device Driver is required

to interface with each device in a Digiplex system.

NOTE:

or CyberDome control from the KTD-400, pan/tilt operation is limited to three speeds.

NOTE:

A Digiplex system's RS422 control signal originates from the controller keypad located at

the head end of the system and travels “down line” via twisted pair cable. When more than

one controller keypad is used, the signal must loop through each keypad or be merged using

KTD-312 Signal Mergers (see igure 2) before being routed to the rest of the components

in the system.

Controller Keypad

Pla ement

6 1034790D / January 2001

KTD-400 Controller Keypad Installation and Operation Manual

1034790D / January 2001

KTD-400 Controller Keypad Installation and Operation Manual

Installation

Mounting the

KTD-300R

The KTD-300R is designed to fit into a standard EIA 19" rack and uses one unit (1.75") of

rack space. Mount the unit using the four holes in its front panel and hardware provided from

the rack manufacturer.

KTD-400 &

KTD-300R

Installing a KTD-400 keypad involves setting the DIP switch, mounting the unit (KTD-300R

only), and making cable connections.

igure 3: KTD-400 and 300R Cover Removal and DIP Switch Location

KTD-300R

KTD-400

Setting: Description:

Digiplex P/T/Z and VCR control only.

Multiplexer control only.

Factory setting: Digiplex P/T/Z, multiplexer, and VCR control.

Controlling a Robot MV96 multiplexer with a KTD-90.

Table 1: DIP Switch Settings

Setting the DIP Swit h The KTD-400 contains a DIP switch that is used to select mode of operation choices as

shown in Table 1. To change the switch from factory settings, refer to igure 3.

NOTE: To in orporate a KTS-41A swit her into a KTD-400 system, refer to the installation

sheet provided with the DTMF Upgrade Kit.

CAUTION: Do not connect power to the unit before all installation steps have been completed.

Do not connect directly to a telecommunication network.

8 1034790D / January 2001

KTD-400 Controller Keypad Installation and Operation Manual

Wiring Conne tions The KTD-400 comes with a 6-foot cable that attaches to a modular phone box. All external

connections are made in the phone box. or the KTD-300R, connections are made to the

removable terminal strip located on the rear of the unit. igures 4 and 5 illustrate connection

details.

igure 4: KTD-400 Modular Phone Box Connections -

Standard Digiplex Control

igure 5: KTD-300R Terminal Strip Connections - Standard Digiplex Control

Digiplex System

Connections

Wiring the KTD-400 and 300R to control a standard Digiplex system involves connecting

the RS422 input cable (if used), the RS422 output cable, and the 12VDC wall transformer

( igures 4 & 5).

The illustrations below give connection points for an RS422 input cable and an RS422

output cable. Do not confuse the two. The input is used only if other keypads, alarm chassis,

or a time date generator are located ahead of the unit that is being wired.

NOTE:

1034790D / January 2001

KTD-400 Controller Keypad Installation and Operation Manual

After all the connections are made, the KTD-400 or KTD-300R is ready for operation. Plug

the 12VDC wall transformer into a power outlet. The LCD window will briefly display keypad

setting information, and then it will enter the operating mode.

Powering Up

KTS-41 System

Control

Wiring the KTD-300R to control a KTS-41A system involves connecting the RS422 input

cable (if used), the RS422 output cable (if used), the DTM output cable (to the KTS-41A),

and the 12VDC wall transformer. See igure 6.

igure 6: KTD-300R terminal strip connections with KTS-41A control

10 1034790D / January 2001

KTD-400 Controller Keypad Installation and Operation Manual

Inhaltsverzeichnis

Andere KALATEL Tastenfeld Handbücher

KALATEL

KALATEL KTD-404 Bedienungsanleitung

Beliebte Tastenfeld Handbücher anderer Marken

BFT

BFT SELETTO Bedienungsanleitung

Micro Id

Micro Id MP7G3BL Gebrauchsanweisung

WindowMaster

WindowMaster WLI 130 Bedienungsanleitung

ACT

ACT ACT PRO 1030 Bedienungsanleitung

Cardin

Cardin SSB Series Bedienungsanleitung

Harman Kardon

Harman Kardon KP 1 Bedienungsanleitung

Chamberlain

Chamberlain KPR2000 Benutzerhandbuch

CYP

CYP CR-KP1 Bedienungsanleitung

Aeware

Aeware k-35 Series Referenzhandbuch

Aritech

Aritech CS-175 Series Bedienungsanleitung

GE NetworX NX-1600E Series Bedienungsanleitung

Lenze AC Tech

Lenze AC Tech MC SERIES Bedienungsanleitung

Burg Wächter

Burg Wächter secuENTRY 7711 Bedienungsanleitung

Aeware

Aeware in.k450 Bedienungsanleitung

Lenze

Lenze EPM-H410 Bedienungsanleitung

Toshiba

Toshiba RKP007Z Bedienungsanleitung

Gemini

Gemini GEM-DXK1 KEYPAD Bedienungsanleitung

Russound

Russound MDK-C5 Betriebsanleitung