Kamoer ATO One 2 Bedienungsanleitung
1
Know ATO One 2
ATO One 2 is an automatic top-off device, which is an upgraded version of ATO One. It
adopts a more compact and accurate optical liquid level sensor and a submersible
pump with anti-dry function. There are two versions to choose from: submersible
pump version and solenoid valve version.
model Application
ATO One 2 SE Equipped with submersible pump as standard, suitable for
occasion when using water container
ATO One 2 for RO Equipped with solenoid valve as standard, suitable for the
occasion where using the RO water system
ATO One 2 SE ATO One 2 for RO
Features
Just install the sensor and submersible pump (solenoid valve), power on and use it.
The sensor is attracted by magnet, which is very convenient to install and adjust
the position.
Equipped with 2 optical liquid level sensors, the blue liquid level sensor monitors
the water level to decide whether to refill the water, and the red liquid level sensor
monitors the water level to prevent the overflow.
2
Rich status indications, when the replenishment overflows, the replenishment
times out, the submersible pump (solenoid valve) is not plugged in, and the
freshwater container is short of water, there will be an indicator light and a buzzer
alarm to remind you.
Panel description
S1: Refill sensor (blue)
S3: Anti-overflow sensor (red)
DC12V: Power input
Pump: Connect to refill pump or solenoid valve
Power: Power indicator (green)
Filling: Refill indicator (blue)
Alarm: Alarm indicator (red)
Installation
ATO One 2 SE
3
1. Install the blue sensor (S1) at the normal water level for water replenishment
detection. Note that the optical liquid level sensor should be kept away from air
bubbles, otherwise it will be disturbed and cause misjudgment;
2. Install the red sensor (S3) above the normal water level line for anti-overflow
detection. If the water level reaches this position, it means that the replenishment
sensor (S1) has failed, and the device will alarm and force the refill pump to stop
working;
3. Connect the pipeline (Submersible pump - Siphon break - Tube holder). Pay
attention to install the siphon break in the freshwater container, and ensure that it
is higher than the highest liquid level of the freshwater container at all times,
otherwise siphon cannot be prevented; the water outlet of the water pipe must be
higher than the liquid level of the fish tank;
4. Plug the submersible pump plug into the Pump connector. Note that the
anti-dry-burning identification sensor of the submersible pump must be kept
upward, only in this way can it be identified and alarmed in time when the water in
the container is insufficient.
5. Insert the power adapter plug into the DC12V connector and power on the power
adapter.
4
ATO One 2 for RO
1. Install the blue sensor (S1) at the normal water level for water replenishment
detection. Note that the optical liquid level sensor should be kept away from air
bubbles, otherwise it will be disturbed and cause misjudgment;
2. Install the red sensor (S3) above the normal water level line for anti-overflow
detection. If the water level reaches this position, it means that the refill sensor (S1)
has failed, and the device will alarm and force the solenoid valve to stop working;
3. Connect the pipeline (RO water system - solenoid valve - tube holder). Plug the
solenoid valve plug into the Pump connector.
4. Insert the power adapter plug into the DC12V connector and power on the power
adapter.
5
Alarm
Status Alarm Take action
buzzer and red light
on for 0.1 seconds, off
for 0.1 seconds
(high speed)
Submersible pump
(solenoid valve) is
not connected or
faulty
1. Check the connection of the
submersible pump (solenoid valve)
2. If the problem is not solved in step 1,
replace the submersible pump (solenoid
valve)
buzzer and red light
on for 0.5 seconds, off
for 0.5seconds
(fast)
Overflow
1. Check if the overflow sensor (S3) is
installed correctly
2. After cleaning the sensor optical probe,
put it in water, if the water is still
replenished, the sensor is damaged
buzzer and red light
on for 1 second, off
for 1 second
(medium speed)
Timeout
1. Check the sensor for dirt or foreign
objects
2. Power off and restart
Notes
Please use the power adapter that comes with the product and work in the
specified working environment.
The sensitivity of the optical liquid level sensor is easily affected by dirt, please
wipe off the dirt on the sensor probe in time.
The bottom fixed base of the submersible pump with filter cotton can be flexibly
removed.
The height difference between the freshwater container and the tank should not
exceed 1.5 meters, and the liquid level of the freshwater container should not be
higher than the tank level.
This product is not waterproof, please use it in an environment with a temperature
of 0-40°C and a humidity of <80%
6
Technical parameter
Power Adapter Input: 100VAC～240VAC
Output: DC12V 1A
Sensor 2 optical level sensors
Refill device DC12V anti-dry submersible pump or solenoid valve
working environment Temperature: 0 - 40℃
Humidity: <80% (non-condensing)
Packing List
ATO One 2 SE
No Name Specification Unit Qty
01 controller ATO One 2 pcs 1
02 Plastic magnet black pcs 2
03 Anti-dry submersible pump DC12V 5W pcs 1
04 Tube holder transparent pcs 1
05 PVC tube 8*11mm; transparent meter 2
06 Siphon break 1/4 straight through pcs 1
07 DC12V power adapter US/EU/UK/AU pcs 1
08 Quick start guide English pcs 1
ATO One 2 for RO
No Name Specification Unit Qty
01 Controller ATO One2 pcs 1
02 Plastic magnet Black pcs 2
03 Solenoid valve 12V 6W pcs 1
04 Tube holder Transparent pcs 1
05 PE tube 1/4 inch；White meter 5
06 DC 12V Power adapter US/EU/UK/AU pcs 1
07 Quick start guide English pcs 1
Warranty service
The warranty service is only valid for users who have correctly installed, used and
maintained in accordance with the manual, and all man-made faults or damages are
not covered by the warranty. Please keep the proof of purchase in a safe place so that
you can obtain satisfactory after-sales service in a timely manner.
Within one year from the date of purchase, if there is any damage caused by the
manufacturing process or components, the company will provide free warranty service.
The free maintenance service provided during the warranty period includes free repair,
free replacement of faulty spare parts, and replacement of products that cannot be
repaired with products of the same model. Free service does not include shipping costs
incurred for product repairs.
Kamoer Fluid Tech (Shanghai) Co., Ltd.
Addr: Building 4, No.79 Xiangjing Road, Songjiang District, Shanghai
Website: www.kamoer.com
Kamoer is registered trademark of Kamoer Fluid Tech (Shanghai) Co., Ltd. We reserve
the right to improve or alter appearance and technical specifications without notice.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Kamoer Wasserpumpe Handbücher
Kamoer
Kamoer X1PROT2 Bedienungsanleitung
Kamoer
Kamoer DIPump-KK300 V2 Bedienungsanleitung
Kamoer
Kamoer FX-STP Bedienungsanleitung
Kamoer
Kamoer DIPump550 Bedienungsanleitung
Kamoer
Kamoer X1 Bedienungsanleitung
Kamoer
Kamoer KSP-F01A Bedienungsanleitung
Kamoer
Kamoer X1 MICROPUMP Bedienungsanleitung
Kamoer
Kamoer ATO One for RO Bedienungsanleitung
Kamoer
Kamoer X1 PRO 2 Bedienungsanleitung
Kamoer
Kamoer LLS Plus Bedienungsanleitung
Kamoer
Kamoer X1 Bedienungsanleitung
Kamoer
Kamoer X2SR Bedienungsanleitung
Kamoer
Kamoer X1 PRO T Bedienungsanleitung
Kamoer
Kamoer F4 Bedienungsanleitung
Kamoer
Kamoer F1 Bedienungsanleitung
Kamoer
Kamoer F4 PRO Bedienungsanleitung
Kamoer
Kamoer X1 Bedienungsanleitung
Kamoer
Kamoer UIP CK15 Bedienungsanleitung
Kamoer
Kamoer F4 PRO Bedienungsanleitung
Kamoer
Kamoer AIP WIFI Bedienungsanleitung
Beliebte Wasserpumpe Handbücher anderer Marken
Sykes AmeriPumps
Sykes AmeriPumps GP100M Fehlerbehebungshandbuch
DUROMAX
DUROMAX XP WX Series Bedienungsanleitung
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Bedienungsanleitung
Franklin Electric
Franklin Electric IPS Bedienungsanleitung
Xylem
Xylem e-1532 Series Bedienungsanleitung
Milton Roy
Milton Roy PRIMEROYAL Bedienungsanleitung