Kapro 962 Bedienungsanleitung

Prolaser Multi Beam

Orbital laser

Model No. 962

165'/50m

Up to 50m/165'

4 AA

INCLUDED

User Manual

Manual del usuario

Manuel d'utilisation

Руководство по эксплуатации

Thank you for purchasing Kapro’s 962 Prolaser®Multi Beam

Orbital laser. You now own one of the most advanced laser

tools available. This manual will show you how to get the

most out of your laser tool.

APPLICATIONS

The 962 Prolaser®Multi Beam Orbital laser is an Indoor /

Outdoor laser level with 3 laser diodes that emits a horizontal

circular line, vertical line and two plumb dots. The laser is

innovatively designed for a very broad range of Professional

and DIY jobs, including:

• Hanging cabinets and shelves.

• Setting oor and wall tiles

• Drywall and acoustic ceilings installation.

• Framing and aligning windows and doors

• Leveling electrical outlets, plumbing and studs

• Leveling slopes for stairs, rails, roofs and more (manual

mode).

NOTE

Keep this user manual for future reference.

165'/50m

Up to 50m/165'

4 AA

INCLUDED

CONTENTS

• Features 4

• Safety instructions 5-6

• Battery installation & Safety 7-8

• Overview 9

• Operating instructions 10-12

• Maintenance 13

• Field calibration test 14-23

• Specications 24

• Warranty 25

FEATURES

• This laser emits 1 horizontal 360° and 1 vertical beams,

that intersect on the wall in front of the device, as well as

two plumb laser dots - on the oor and on the ceiling.

• Self-leveling in automatic mode when the laser is

positioned within its self-leveling range which is ±3º

• Visual warning when the laser level is out of leveling

range.

• Pulse mode emits pulses that can be detected by a

detector.

• Max. indoor working range - 30m (100')

• The max. detectable range of the laser in pulse mode is

50m (165').

• For optimal vertical line viewing : position the laser at

least 2 meters from the wall.

• Manual mode allows angular layout/marking.

• IP65 Rated for water and dust protection.

• Locking mechanism to protect the pendulum during

transportation.

• 1/4" tripod thread (5/8" thread on the mount)

• Shock resistant rubber over molded casing.

• Multi-purpose magnetic mount.

NOTE

This device contains precision components

sensitive to external shock, impact or falls

that may compromise its functionality. Handle

with care to maintain its accuracy.

SAFETY INSTRUCTIONS

WARNING

This product emits radiation classied as Class

II according to EN 60825 -1

The laser radiation can cause serious eye injury

• Do not stare into the laser beam

• Do not position the laser beam so that it unintentionally

blinds you or others.

• Do not operate the laser level near children or let

children operate the laser level.

• Do not look into a laser beam using magnifying optical

devices such as binoculars or a telescope,since it will

increase the level of eye injury.

WARNING: This product contains lead in soldered

joints and certain Electrical parts contain chemicals

which are known to the State of California to cause

cancer, birth defects or other reproductive harm.

(California Health & Safety Code Section 25249.6- Proposition 65)

• Do not remove or deface warning labels on the laser level.

• Do not disassemble the laser level, laser radiation can

cause serious eye injury.

• Do not drop the unit.

• Do not use solvents to clean the laser unit.

• Do not use in temperatures below -10°C or above 45°C

(14°F to 113°F)

• Do not operate the laser in explosive atmospheres such

as ammable liquids, gases or dust. Sparks can cause

ignition.

• When not in use remove the battery, engage the

pendulum lock and place the laser in the carrying pouch.

• Make sure the pendulum lock mechanism is engaged

before transporting the laser.

NOTE

If the Pendulum lock mechanism is not

engaged before transportation, internal

mechanical damage may occur.

The 962 Prolaser®Multi Beam Orbital laser®uses 4 standard

AA batteries.

Installation

1. Press down the ledge of the battery cover.

2. Insert 4 new AA batteries of the same brand according to

the polarity diagram on the battery cover.

3. Reclose the battery cover.

BATTERY INSTALLATION & SAFETY

Replace the batteries if the beam/battery indicator (b) starts

to ash instead of emitting a steady light.

WARNING: Battery can deteriorate, leak or explode and

can cause injury or re.

1. Do not shorten the battery terminals.

2. Do not dispose of battery into household waste.

3. Do not dispose of battery in re.

4. Defective or dead batteries must be disposed according

to local regulations.

5. Keep the batteries out of children's reach.

1. On/Off Locking Switch

2. Keypad

a. Beam Selector/Manual mode button

b. Beam / Battery indicator

c. Pulse Mode button

d. Pulse Mode indicator

3. Horizontal laser beam window

4. Forward vertical laser beam window

5. Down plumb dot window

6. Battery cover

7. 1/4” tripod mount

OVERVIEW

OPERATING INSTRUCTIONS

Working in Automatic mode (self-leveling):

In automatic mode the laser level will level itself in ± 3°

range and will project horizontal 360° beam, vertical beam

and 2 plumb dots.

1. Remove the laser level from the case and place it on a

solid, at, vibration free surface or on a tripod.

2. Push the locking switch #1 to the ON position. The laser

level will project all the beams: a 360° horizontal beam,

vertical beam and 2 plumb dots. The beam indicator (b)

will turn on.

3. Press the beam selector button (a) to choose the required

laser beams by cycle:

All beams => Horizontal beam only => Vertical beam

only => Horizontal + Vertical beams => Plumb dots only

=> All beams.

4. If the initial inclination of the laser level is beyond ± 3°

and the automatic mode is activated, the laser beams will

ash. In this case reposition the laser level on a more

level surface.

5. Before moving the laser level, turn the locking switch

#1 to the OFF position, this will lock the pendulum and

protect your laser level.

Inhaltsverzeichnis

Sprachen:

Andere Kapro Laser-Nivelliergerät Handbücher

Kapro

Kapro Prolaser 3D All-Lines Bedienungsanleitung

Kapro

Kapro Prolaser Plus 870 Green Bedienungsanleitung

Kapro

Kapro Prolaser 883 Bedienungsanleitung

Kapro

Kapro 883G Bedienungsanleitung

Kapro

Kapro Prolaser Plus 870 Bedienungsanleitung

Kapro

Kapro Prolaser Plus Bedienungsanleitung

Kapro

Kapro Prolaser 883 GREEN Bedienungsanleitung

Kapro

Kapro Prolaser 3D All-Lines Bedienungsanleitung

Kapro

Kapro Prolaser Vector 873 Bedienungsanleitung

Kapro

Kapro Prolaser 897 Bedienungsanleitung

Kapro

Kapro Prolaser Electrota 8991 Bedienungsanleitung

Kapro

Kapro Prolaser Plus Bedienungsanleitung

Kapro

Kapro PROLASER ALL-LINES 875 GREEN Bedienungsanleitung

Kapro

Kapro PROLASER LAYOUT SET Bedienungsanleitung

Kapro

Kapro Prolaser Vector 888 Bedienungsanleitung

Kapro

Kapro Prolaser Bambino GREEN Bedienungsanleitung

Kapro

Kapro PROLASER ELECTROTA GREEN 8991G Bedienungsanleitung

Kapro

Kapro Prolaser 4D XTRA Green Bedienungsanleitung

Kapro

Kapro Prolaser 3D All-Lines 883 Bedienungsanleitung

Kapro

Kapro ROLASER 899 Bedienungsanleitung

Kapro

Kapro PROLASER ALL-LINES 875 GREEN Bedienungsanleitung

Kapro

Kapro PROLASER ALL-LINES 875 GREEN Bedienungsanleitung

Kapro

Kapro Prolaser 3D All-Lines Bedienungsanleitung

Kapro

Kapro PROLASER ALL-LINES 875 GREEN Bedienungsanleitung

Beliebte Laser-Nivelliergerät Handbücher anderer Marken

Nedo

Nedo ET-5 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung

LaserLiner

LaserLiner X2-Laser Bedienungsanleitung

Spectra

Spectra LL300N Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung

Nedo

Nedo Crossliner 4 Bedienungsanleitung

Lasertec

Lasertec FX360G Bedienungsanleitung

Flex

Flex ALC 8 Bedienungsanleitung

Black & Decker

Black & Decker LZR5 Bedienungsanleitung

Johnson

Johnson 40-6692 Bedienungsanleitung

Cocraft

Cocraft HL 20-SG Bedienungsanleitung

Zircon

Zircon iLine Bedienungsanleitung

HWH

HWH 310 SERIES Bedienungsanleitung

Leica

Leica iCON robot 60 Bedienungsanleitung

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder XP Bedienungsanleitung

DeWalt

DeWalt DW082 Bedienungsanleitung

imex

imex EL20 Bedienungsanleitung