Kärcher BRC 30/15 C *JP Bedienungsanleitung

BRC 30/15 C

59657420 08/15

English 3

Français 13

Español 25

– 1

몇WARNING

To reduce the risk of fire, electric

shock, or injury:

–DO NOT LEAVE appliance unat-

tended when plugged in. Unplug

from outlet when not in use and be-

fore servicing.

몇WARNING

–TO REDUCE THE RISK OF ELEC-

TRIC SHOCK-USE INDOORS

ONLY

–Do not allow to be used as a toy.

Close attention is necessary when

used by or near children.

–Use only as described in this manu-

al. Use only manufacturer’s recom-

mended attachments.

–Do not use with damaged cord or

plug. If the unit is not working as it

should, has been dropped, dam-

aged, left outdoors, or dropped into

water, return it to a service center.

–Do not pull or carry by the cord, do

not use cord as a handle, do not

close a door on the cord, or pull

cord around sharp edges or cor-

ners. Do not run appliance over

cord. Keep cord away from heated

surfaces.

–Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

–Do not handle plug or appliance

with wet hands.

–Do not put any object into openings.

Do not use with any openings

blocked; keep free of dust, lint, hair

and anything that may reduce air

flow.

–Keep hair, loose clothing, fingers

and all parts of body away from

openings and moving parts.

–Turn off all controls before unplug-

ging.

–Use extra care when cleaning on

stairs.

–Do not use to pick up flammable or

combustible liquids, such as gaso-

line, or use in areas where they may

be present.

–Connect to a properly grounded

outlet only. See Grounding Instruc-

tions.

–Always disconnect cord from elec-

trical outlet before servicing appli-

ance.

–Never sweep off explosive liquids,

combustible gases or undiluted ac-

ids and solvents. This includes pet-

rol, paint thinner or heating oil which

can generate explosive fumes or

mixtures upon contact with the air.

Acetone, undiluted acids and sol-

vents must also be avoided as they

can harm the materials on the ma-

chine.

–Do not vacuum up burning or

smouldering objects!

This product must be grounded. If it

should malfunction or breakdown,

grounding provides a path of least re-

sistance for electric current to reduce

the risk of electric shock. This product

is equipped with a cord having an

equipment-grounding conductor and a

grounding plug. The plug must be

plugged into an appropriate outlet that

is properly installed and grounded in

accordance with all local codes and or-

dinances.

IMPORTANT SAFETY

INSTRUCTIONS

GROUNDING INSTRUCTIONS

3EN

– 2

DANGER

Improper connection of the equipment-

grounding conductor can result in a

risk of electrocution. Check with a qual-

ified electrician or service personnel if

you are in doubt as to whether the out-

let is properly grounded. Do not modify

the plug provided with the product - if it

will not fit the outlet, have a proper out-

let installed by a qualified electrician.

Do not use any type of adapter with this

product.

This appliance is for use on a nominal

120-volt circuit and has a grounding at-

tachment plug that looks like the plug

illustrated in sketchpicture A. Make

sure that the appliance is connected to

an outlet having the same configura-

tion as the plug. No adaptor should be

used with this appliance.

CONNECT TO A PROPERLY

GROUNDED OUTLET ONLY

1 Grounded outlet

2 Grounded outlet box

3 Grounded pin

The owner and/or user must have an

understanding of the manufacturer’s

operating instructions and warnings

before using this pressure washer.

Warning information should be empha-

sized and understood.

If the operator is not fluent in English,

the manufacturer’s instructions and

warnings shall be read to and dis-

cussed with the operator in the opera-

tor’s native language by the purchaser/

owner, making sure that the operator

comprehends its contents.

Owner and/or user must study and

maintain for future reference the man-

ufacturers’ instructions.

Before starting to operate the unit be in

operating position.

Do not start or operate the unit, any of

its functions or attachments, from any

place other than from the designated

operators position.

Before leaving the operator’s position:

A bring the unit to a complete stop;

B if the unit must be on an incline,

block the wheels.

Maintain a safe distance from the edge

of ramps, platforms, and other similar

working surfaces.

Do not add to, or modify the unit.

Do not block access to fire aisles, stair-

ways or fire equipment.

Yield the right of way to pedestrians

and emergency vehicles such as am-

bulances and fire trucks.

Cross railroad tracks at an angle wher-

ever possible. Do not park closer than

OPERATING SAFETY RULES

AND PRACTICES

Owner/User Responsibility

General

Travelling

4 EN

– 3

6 ft (1800 mm) to the nearest rail of a

railroad track.

Keep a clear view of the path of travel

and observe for other traffic, person-

nel, and safe clearances.

Under all travel conditions, operate the

unit at a speed that will permit it to be

brought to a stop in a safe manner.

Do not indulge in stunt driving or horse-

play.

Slow down for wet and slippery floors.

Before driving over a dockboard or

bridge plate, be sure that it is properly

secured. Drive carefully and slowly

across the dockboard or bridge plate,

and never exceed its rated capacity.

When negotiating turns, reduce speed

to a safe level consistent with the oper-

ating environment. Make the turns

smoothly.

If the unit is found to be in need of re-

pair or in any way unsafe, or contrib-

utes to an unsafe condition, the matter

shall be reported immediately to the

user’s designated authority, and the

unit shall not be operated until it has

been restored to safe operating condi-

tion.

If during operation the unit becomes

unsafe in any way, the matter shall be

reported immediately to the user’s des-

ignated authority, and the unit shall not

be operated until it has been restored

to safe operating condition.

Do not make repairs or adjustments

unless specifically authorized to do so.

Operation of the unit may be hazard-

ous if maintenance is neglected or re-

pairs, rebuilds, or adjustments are not

performed in accordance with the man-

ufacturer’s design criteria. Therefore,

maintenance facilities (on or off prem-

ises), trained personnel, and detailed

procedures shall be provided.

Maintenance and inspection of the unit

shall be performed in conformance

with the following practices:

A a schedules planned maintenance,

lubrication, and inspection system

shall be followed; consult the man-

ufacturer’s recommendations.

B Only trained and authorized per-

sons shall be permitted to operate a

powered floor scrubber. Operators

of powered floor scrubbers shall be

qualified as to visual, auditory, phi-

sical, and mental ability to operate

the eqipment safely.

Avoid fire hazards and have fire pro-

tection equipment present in the work

area. Do not use open pans of fuel or

flammable cleaning fluids for cleaning

parts.

Any unit not in safe operating condition

shall be removed from service.

Repairs shall not be made in Class I,

Class II, and Class III locations.

Fire Prevention.The unit shall be kept

in a clean condition and reasonably

free of lint, excess oil, and grease.

Noncombustible agents are preferred

for cleaning the unit. Flammable liquids

[those having flash points at or above

100°F (37,8°C)] are not allowed. Pre-

cautions regarding toxicity, ventilation,

and fire hazard shall be appropriate for

the agent or solvent used.

Nameplate Visibility. The unit type

designations as shown on the name-

plate and the type markers shall not be

covered over with paint so that their

identification information is obscured.

Operator care of the unit

MAINTENANCE AND

REBUILD PRACTICES

FIRE SAFETY STANDARD

5EN

– 4

Please read and comply with

these original instructions

prior to the initial operation of your ap-

pliance and store them for later use or

subsequent owners.

The packaging material can be

recycled. Please do not place the

packaging into the ordinary refuse for

disposal, but arrange for the proper re-

cycling.

Old appliances contain valuable

materials that can be recycled.

Please arrange for the proper re-

cycling of old appliances. Please dis-

pose your old appliances using appro-

priate collection systems.

Notes about the ingredients

(REACH)

You will find current information about

the ingredients at:

www.kaercher.com/REACH

Before initial start-up it is definitely nec-

essary to read the safety information

no. 5.956-251.0!

DANGER

Immediate danger that can cause se-

vere injury or even death.

몇WARNING

Possible hazardous situation that

could lead to severe injury or even

death.

몇CAUTION

Possible hazardous situation that

could lead to mild injury to persons or

damage to property.

This appliance is intended for commer-

cial use as a wet cleaning appliance for

carpets as depicted in these operating

instructions as well as in the descrip-

tions and safety notes in the enclosed

brochure "Safety indications for brush

cleaning appliances and spray extrac-

tion appliances".

The applicance sprays cleaning solu-

tion from the fresh water tank onto the

carpet to be cleaned, works the deter-

gent into the carpet with a brush roller

and vacuums the dirt and used deter-

gent into the waste water reservoir.

If required, an accessorz (such as a

hand nozzle) can be attached..

Contents

Safety instructions . . . . . . . EN 4

Proper use . . . . . . . . . . . . . EN 4

Function . . . . . . . . . . . . . . . EN 4

Control elements . . . . . . . . EN 5

Start up. . . . . . . . . . . . . . . . EN 5

Operation . . . . . . . . . . . . . . EN 6

Shutting down . . . . . . . . . . EN 7

Transport . . . . . . . . . . . . . . EN 7

Storage. . . . . . . . . . . . . . . . EN 7

Care and maintenance. . . . EN 7

Troubleshooting . . . . . . . . . EN 9

Technical specifications . . . EN 10

Spare parts. . . . . . . . . . . . . EN 10

Warranty. . . . . . . . . . . . . . . EN 10

Environmental protection

Safety instructions

Symbols in the operating

instructions

Proper use

Function

6 EN

– 5

1 Push handle

2 Key detergent solution

3 Dome

4 waste water tank

5 Dome lock.

6 Fresh water tank

7 Vacuum bar

8 Cleaning head

9 Lock of pushing handle

10 Cleaning head screw

11 Detergent hose coupling

12 Drainage hose for fresh water

13 Suction hose

14 Operating field

1 Fuse for brush drive

2 Fuse for suction turbine

3 Power switch

A Normal operation

B OFF - Appliance is switched off.

C Operation with hand nozzle

Swivel the domelock to the front.

Lift up the waste water tank and put

it aside.

Fill the fresh water tank with hot wa-

ter (max. 60°C, capacity 15 liters).

Pour in detergent.

If you require further information

please request the product information

sheet and the DIN safety data sheet for

the respective cleaning agent.

몇WARNING

Health risk, risk of damage. Observe

all indications on the detergent used.

For considerate treatment of the envi-

ronment use detergent economically.

Insert the waste water tank back

onto the appliance.

Replace the lid of the waste water

tank and align it.

Swivel the dome lock to the rear.

Control elements Operating field

Start up

Carpet cleaning RM 764 liquid

Defoaming RM 761

7EN

– 6

Vacuum loose dirt with a vacuum

cleaner prior to cleaning.

Swivel the pushing handle lock to

the outside, set the desired pushing

handle height and close the lock.

Insert the mains plug into the sock-

et.

몇CAUTION

Risk of damage. Check the object to be

cleaned prior to using the appliance in

an inconspicuous place for colour fast-

ness and water resistance.

DANGER

Risk of electric shock.

Do not let the mains cable come in con-

tact with the rotating brushes or rotat-

ing pads.

Set the appliance switch to normal

operation - start the suction turbine

and the brush drive.

Use the detergent solution key on

the push bow to spray on detergent

solution.

Run across the surface to be

cleaned in overlapping paths. Pull

the appliance backwards during

this procedure (do not push).

If the waste water tank is filled to 3/

4 of its capacity, switch the appli-

ance switch to "OFF".

Swivel the domelock to the front.

Lift the waste water tank off the ap-

pliance and empty it.

몇WARNING

Please observe the local provisions re-

garding the wastewater treatment.

Note:

If the waste water tank is full, dirty wa-

ter will flow back onto the carpet, as

soon as the appliance is switched off.

Only use accessories and spare parts

which have been approved by the

manufacturer. The exclusive use of

original accessories and original spare

parts ensures that the appliance can

be operated safely and trouble free.

Connect the provided adapter to

the detergent hose of the accessory

tools.

Pull the suction hose out of the

dome.

Insert the suction hose of the ac-

cessory tool into the dome instead

of the suction hose.

Connect the coupling of the deter-

gent hose on the appliance to the

detergent hose of the accessory

tool.

Set the appliance switch to opera-

tion with manual nozzle - the suc-

tion turbine will start.

Use the lever on the accessory tool

to spray on detergent solution.

Note:

When unplugging the accessory tools,

the adapter must be removed from the

appliance, so that the water output on

the appliance is closed.

Recommendation: Leave the adapter

on the hose of the accessory tool.

Operation

Emptying the waste Water tank

Operation with accessory tools

8 EN

– 7

–Highly soiled spots should be pre-

soaked and the detergent solution

should soak 5 to 10 minutes.

–Always work from the light to the

shade (from the window to the

door).

–Always work from the cleaned to

the uncleaned surface.

–The more sensitive the surface (ori-

ental rugs, berbers, upholstery ma-

terial) the lower the cleaning solu-

tion concentration should be.

–Rugs with jute backing can shrink if

too much water is used and can

bleed colours.

–Brush high-fiber rugs in the direc-

tion of the weave after cleaning (us-

ing a fiber brush or a scrubber).

–Do not step on cleaned surfaces

until they have dried and do not

place furniture on them to avoid

pressure spots or rust stains.

–When cleaning previously sham-

pooed carpets, foam will be gener-

ated in the dirt water reservoir. In

such a case add Foam ex RM 761

to the dirt water reservoir.

Set the appliance switch to "OFF".

Empty the dirt water reservoir.

Pull the drain hose for the fresh wa-

ter off the hose nipple an drain the

detergent solution.

Fill the fresh water tank with approx.

2 liters of hot water (max. 60°C) and

flush the spray system by pressing

the detergent solution key.

Disconnect the mains plug from the

socket.

Pull the drain hose for the fresh wa-

ter off the hose nipple an drain the

detergent solution.

Clean the sieves on the fresh water

tank and inside the dome.

Rinse the waste water tank with

clear water.

Tilt the appliance backwards and

clean the cleaning head and the

vacuum bar..

In case of danger of frost:

Empty the fresh and dirt water res-

ervoirs.

Store the appliance in a frost-pro-

tected room.

몇CAUTION

Risk of injury and damage! Observe

the weight of the appliance when you

transport it.

Use the pushing handle to push the

appliance.

When transporting in vehicles, se-

cure the appliance according to the

guidelines from slipping and tipping

over.

몇CAUTION

Risk of injury and damage! Note the

weight of the appliance in case of stor-

age.

This appliance must only be stored in

interior rooms.

DANGER

Danger of injury by electric shock.

First pull out the plug from the mains

before carrying out any tasks on the

machine.

Cleaning tips

Shutting down

Cleaning the device

Frost protection

Transport

Storage

Care and maintenance

9EN

– 8

Check high power cable, extension

cables and hoses for damage every

time before use.

Check spray pattern of the nozzle.

몇CAUTION

Risk of damage. Never use a wire or a

needle to clear plugged nozzles, but

rinse them with hot water (see "Trou-

bleshooting").

Check hoses and seals to see if

there are damages. Have defective

parts replaced by Customer Ser-

vice.

Check the brushes for wear, re-

place if required.

The brushes are considered worn,

if the bristles have the same length

as the yellow indicator bristles.

Empty the fresh water tank and

waste water tank.

Tilt the appliance backward and

store it on the pushing handle.

Unscrew and remove the left and

right screws on the cleaning head.

Remove the cleaning head.

1 Nozzle

2 Fastening clip

3 Hose clip

Pull the fastener clip off to the side.

Pull the nozzle backwards out of the

support plate.

Open the hose clip and pull the noz-

zle off the hose.

Insert the new nozzle into the hose.

Assemble it back in the reverse se-

quence.

Note:

When inserting the nozzle into the sup-

port plate, watch for the correct aligne-

ment of the nozzle.

Empty the fresh water tank and

waste water tank.

Tilt the appliance backward and

store it on the pushing handle.

Unscrew and remove the left and

right screws on the cleaning head.

Remove the cleaning head.

Maintenance intervals

Daily before use

Every 25 operating hours

Maintenance Works

Replace the nozzle

Exchanging the brush

10 EN

Andere Handbücher für BRC 30/15 C *JP

Inhaltsverzeichnis

Sprachen:

Andere Kärcher Bodenreinigungsmaschine Handbücher

Kärcher

Kärcher KM 70/30 C Bp Bedienungsanleitung

Kärcher

Kärcher KM 90/60 R Bp Bedienungsanleitung

Kärcher

Kärcher KM 75/40 W G Bedienungsanleitung

Kärcher

Kärcher BR 530 BAT Package Bedienungsanleitung

Kärcher

Kärcher BR 40/25 C Bp Pack Bedienungsanleitung

Kärcher

Kärcher KM 70 C Bedienungsanleitung

Kärcher

Kärcher KM 85 W B Classic Bedienungsanleitung

Kärcher

Kärcher KM 130/300 R LPG Bedienungsanleitung

Kärcher

Kärcher KSM 750 BAT Bedienungsanleitung

Kärcher

Kärcher BR/BD 530 XL BAT Package Bedienungsanleitung

Kärcher

Kärcher B 80 W Bp Bedienungsanleitung

Kärcher

Kärcher KMR 1000 T Bedienungsanleitung

Kärcher

Kärcher KSM 750 B Bedienungsanleitung

Kärcher

Kärcher HDS 5/12 C Bedienungsanleitung

Kärcher

Kärcher BD 530 Bedienungsanleitung

Kärcher

Kärcher KM 130/300 R D Bedienungsanleitung

Kärcher

Kärcher T 100 Bedienungsanleitung

Kärcher

Kärcher BD 45/40 Bedienungsanleitung

Kärcher

Kärcher KM 100/100 R G Bedienungsanleitung

Kärcher

Kärcher KM 85/50 W Comfort Bedienungsanleitung

Kärcher

Kärcher BD 30/4C Bedienungsanleitung

Kärcher

Kärcher B 40 C Bp Bedienungsanleitung

Kärcher

Kärcher KM 85/50 W P Comfort Bedienungsanleitung

Kärcher

Kärcher BD 50/50 Bp Classic Bedienungsanleitung

Beliebte Bodenreinigungsmaschine Handbücher anderer Marken

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Bedienungsanleitung

Numatic

Numatic ET 4045 Bedienungsanleitung

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Bedienungsanleitung

Mytee

Mytee 8070 Mytee-Lite Bedienungsanleitung

Triple S

Triple S Ace 26T1 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SW 750 Bedienungsanleitung

Tornado

Tornado Marathon 2000 98190 Handbuch

Windsor

Windsor ADMIRAL Admiral 8 Bedienungsanleitung

Numatic

Numatic TTB 1117/100 Bedienungsanleitung

Tennant

Tennant 8210D Bedienungsanleitung

Nobles

Nobles Frontier Produkthandbuch

lavina

lavina 21-X Bedienungsanleitung

KENT

KENT Edge 28B Bedienungsanleitung

Tennant

Tennant 215 Produkthandbuch

Windsor

Windsor BDP 51/2000C Bedienungsanleitung

CleanFreak

CleanFreak DURA-18HD Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Administratorhandbuch

BETCO

BETCO PB24 Bedienungsanleitung