RIDING INSTRUCTIONS
•Check the e-bike before every use to make sure the e-bike and
components, including, but not limited to, that wheels are secure,
brakes work, and the frame is solid, to confirm they are in working
order.
•Check battery level before every use to confirm it is charged.
General Components and use:
•Handlebars:
oRight side: Rear Brake Lever, Gear Shifter, and bell.
oLeft side: Front Brake Lever, Thumb Throttle, PAS & Display
Controls.
•Acceleration: The e-bike can be accelerated via regular pedal
motion and via electric motor by using the throttle.
oWhen starting from a stop, pedal the bike first then engage
the thumb throttle. Failure to do so, may damage the
motor.
oWhen riding the e-bike up steep grades for extended
periods of time, use the Pedal Assist (PAS) and avoid using
the Thumb Throttle. Failure to do so, may damage electrical
components and the motor.
•Braking: It is recommended that the Rear Brake is the primary
brake used, with the Front Brake being a secondary and support
brake. Rider should not depress Front Brake Lever only or at high
speeds, as an accident and serious injury could occur. The brakes
on your electric e-bike include an automatic motor cut-off, which
means the motor power will be shut off when the brake levers are
depressed.
