KEMP Technologies LoadMaster Bedienungsanleitung

Hardware LoadMaster

Installation Guide

UPDATED: 22 March 2021

Kemp Technologies logo are registered trademarks of Kemp Technologies, Inc.

Kemp Technologies, Inc. reserves all ownership rights for the LoadMaster and Kemp 360 product

line including software and documentation.

Used, under license, U.S. Patent Nos. 6,473,802, 6,374,300, 8,392,563, 8,103,770, 7,831,712, 7,606,912,

7,346,695, 7,287,084 and 6,970,933

Hardware LoadMaster

Table of Contents

1 Introduction 4

1.1 Document Purpose 4

1.2 Intended Audience 4

1.3 Related Firmware Version 4

1.4 Prerequisites 4

2 Installing a Hardware LoadMaster 5

2.1 Connect and Power On the Equipment 5

2.2 Configure Networking 5

2.3 License and Configure the LoadMaster 7

References 12

Last Updated Date 13

Hardware LoadMaster

1 Introduction

There is a variety of hardware LoadMaster models to choose from. For details on each please

consult the Kemp website: www.kemptechnologies.com.

Each of the hardware LoadMasters can be installed and licensed in the same way, as described in

this document.

1.1 Document Purpose

This document outlines how to install a hardware LoadMaster.

1.2 Intended Audience

This document is intended to be read by anyone who is interested in finding out how to install a

hardware LoadMaster.

1.3 Related Firmware Version

Published with LMOS version 7.2.48.3 LTS. This document has not required substantial changes

since 7.2.48.3 LTS. However, the content is in sync with the latest LoadMaster LTS firmware.

1.4 Prerequisites

The following requirements are needed before installing a hardware LoadMaster:

A monitor with a standard VGA 15-pin connection

A USB keyboard or a workstation with a terminal emulator:

- Speed: 115200

- Data bits: 8

- Parity: None

- Stop bits: 1

- Flow control: None

Serial cable (included)

Hardware LoadMaster

1 Introduction

2 Installing a Hardware

LoadMaster

A hardware LoadMaster package includes the following items:

Hardware LoadMaster appliance

Power cable

Serial cable

Mounting brackets

Serial cables are not included with LM-4000 models.

2.1 Connect and Power On the Equipment

To connect and power on the LoadMaster, follow the steps below:

1. Install into a 19-inch rack or another safe location.

2. Connect the Ethernet cable(s) to the port(s) on the LoadMaster.

For single arm setups, the switch only needs to be connected

to port 0.

3. Connect a monitor and keyboard to the LoadMaster (or just a serial cable).

4. Connect the power cable to the LoadMaster.

5. Turn on power to the unit.

2.2 Configure Networking

If you do not have the ability to connect to the LoadMaster

using a VGA or serial connection, skip to the License and

Configure the LoadMaster section. The default IP address for

the unit is 192.168.1.101.

Hardware LoadMaster

2 Installing a Hardware LoadMaster

Once the LoadMaster is powered on, networking needs to be configured to make the LoadMaster

available on your network. To do this, follow the steps below:

1. Log in to the console with the default credentials.

The default credentials are below:

- Login: bal

- Password: 1fourall

2. Enter the IP address of the eth0 interface, the network-facing interface of the

LoadMaster, in the input field within the Network Side Interface Address field and press

Enter on the keyboard.

3. Enter the IP address of the Default Gateway.

Hardware LoadMaster

2 Installing a Hardware LoadMaster

4. Enter a space-separated list of nameserver IP addresses.

5. A message will appear asking to continue licensing using the Web User Interface (WUI).

Try to access the IP address using a web browser. Ensure to enter https:// before the IP

address.

Contact the local Kemp Customer Services Representative for

further support if needed.

2.3 License and Configure the LoadMaster

Follow the steps below on a computer that is connected to the same network as the LoadMaster:

1. Open a web browser.

2. In the address bar, enter https:// followed by the LoadMaster IP address, for example

https://192.168.1.1.

3. A warning may appear regarding website security certificates. Please click the

continue/ignore option.

4. The LoadMaster End User License Agreement screen appears.

Please read the license agreement and, if willing to accept the

conditions therein, click the Agree button to proceed.

Hardware LoadMaster

2 Installing a Hardware LoadMaster

5. If using the Online licensing method, fill out the fields and click License Now.

When licensing a hardware box, ensure to not enter an Order

ID.Licensing is performed based on the Serial Number entered

during pre-provisioning.

If using the Offline Licensing method, select Offline Licensing,

obtain the license text, paste it into the License field and click

Apply License. For detailed instructions on how to register for a

Kemp ID and license the LoadMaster, refer to the Licensing,

Feature Description.

6. The Change Password screen appears

Hardware LoadMaster

2 Installing a Hardware LoadMaster

7. Enter a password for the bal user in the Password input field and retype it in the Retype

Password input field.

8. The login screen appears again, enter the bal user name and the new password as

defined in the previous step.

9. In the screen informing that the password has changed, click the Continue button

10. If the machine has shipped with a temporary license, a warning will appear informing

that a temporary license has been installed on the machine and for how long the license is

valid.

11. Click OK.

12. The Appliance Vitals screen of the LoadMaster will appear.

Hardware LoadMaster

2 Installing a Hardware LoadMaster

13. Go to System Configuration > Network Setup in the main menu.

14. Click the eth0 menu option within the Interfaces section.

15. In the Network Interface 0 screen, enter the IP address of the eth0 interface, the network

facing interface of the LoadMaster, in the Interface Address input field.

16. Click the Set Address button.

17. Click the eth1 menu option within the Interfaces section.

18. In the Network Interface 1 screen, enter the IP address of the eth1 interface, the farm-

side interface of the LoadMaster, in the Interface Address text box.

19. Click the Set Address button.

This interface is optional, depending on the network

configuration.

20. In the main menu, go to System Configuration > Local DNS Configuration > Hostname

Configuration menu option.

21. Enter the hostname in the Current Hostname text box and click Set Hostname.

22. Click the Set Hostname button.

23. In the main menu, go to Local DNS Configuration > DNS Configuration.

Hardware LoadMaster

2 Installing a Hardware LoadMaster

Inhaltsverzeichnis

Andere KEMP Technologies Netzwerk-Hardware Handbücher

KEMP Technologies

KEMP Technologies LoadMaster 1500 Bedienerhandbuch

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung