Kenmore 596 . 65332600 Bedienungsanleitung

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8

ENGLISHFRANÇAIS ESPAÑOL

Part No. 12828180

Form C/12/06

www.sears.com

Au Canada, www.sears.ca

Bottom Freezer Refrigerator*

Use & Care Guide

Réfrigérateur à compartiment congélateur inférieur*

Guide d'utilisation et d'entretien

Refrigerador con congelador inferior*

Guía de Uso y Cuidado

* See model numbers on inside back cover for models referenced

* Voir sur troisième de couverture les numéros de modèle auxquels il est fait référence.

* Ver los números de modelos en el interior de la contraportada para los modelos respectivos.

Important safety information

What you need to know

about safety

instructions

Warning and Important Safety

Instructions appearing in this manual are

not meant to cover all possible

conditions and situations that may occur.

Common sense, caution, and care must

be exercised when installing,

maintaining, or operating refrigerator.

Always contact your dealer, distributor,

service agent, or manufacturer about

problems or conditions you do not

understand.

Save these instructions

DANGER – Immediate hazards

which WILL result in severe personal

injury or death.

DANGER

WARNING – Hazards or unsafe

practices which COULD result in

severe personal injury or death.

WARNING

CAUTION – Hazards or unsafe

practices which COULD result in

minor personal injury.

CAUTION

To reduce risk of injury or death,

follow basic precautions, including

the following:

IMPORTANT: Child entrapment and

suffocation are not problems of the

past. Junked or abandoned

refrigerators are still dangerous –

even if they sit out for “just a few

days.” If you are getting rid of your

old refrigerator, please follow the

instructions below to help prevent

accidents.

Before you throw away your old

refrigerator or freezer:

➢Take offthe doors.

➢Leave the shelves in

place so children

may not easily climb

inside.

DANGER

RECOGNIZE SAFETY

SYMBOLS, WORDS,

LABELS

Toreduce risk of fire, electric shock, serious injury or

death when using your refrigerator,follow these basic

precautions, including the following:

1. Read all instructions

before

using the refrigerator.

2. Observe all local codes and ordinances.

3. Be sure to follow grounding instructions.

4. Check with a qualified electrician if you are not sure this

appliance is properly grounded.

5. Do not ground to a gas line.

6. Do not ground to a cold-water pipe.

7. Refrigerator is designed to operate on a separate 115

volt, 15 amp., 60 cycle line.

8. Do not modify plug on power cord. If plug does not fit

electrical outlet, have proper outlet installed by a

qualified electrician.

9. Do not use a two-prong adapter,extension cord or

power strip.

10. Do not remove warning tag from power cord.

11. Do not tamper with refrigerator controls.

12. Do not service or replace any part of refrigerator unless

specifically recommended in Use & Care Guide or

published user-repair instructions. Do not attempt

service if instructions are not understood or if they are

beyond personal skill level.

13.

Always

disconnect refrigerator from electrical supply

before attempting any service. Disconnect power cord

by grasping the plug, not the cord.

14. Install refrigerator according to Installation Instructions.

All connections for water, electrical power and grounding

must comply with local codes and be made by licensed

personnel when required.

15. Keep your refrigerator in good condition. Bumping or

dropping refrigerator can damage refrigerator or cause

refrigerator to malfunction or leak. If damage occurs,

have refrigerator checked by qualified service

technician.

16. Replace worn power cords and/or loose plugs.

17.

Always

read and follow manufacturer’s storage and ideal

environment instructions for items being stored in

refrigerator.

18. Your refrigerator should not be operated in the

presence of explosive fumes.

19. Children should not climb, hang or stand on any part of

the refrigerator.

20. Clean up spills or water leakage associated with water

installation.

WARNING

ENGLISH FRANÇAIS ESPAÑOL

Protection agreements

Master protection

agreements

IN THE U.S.A.

Congratulations on making a smart

purchase. Your new Kenmore®

appliance is designed and manufactured

for years of dependable operation. But

like all products, it may require

preventive maintenance or repair from

time to time. That is when having a

Master Protection Agreement can save

you money and aggravation.

Purchase a Master Protection

Agreement now and protect yourself

from unexpected hassle and expense.

The Master Protection Agreement also

helps extend the life of your new

appliance. Here is what is included in

the agreement:

➢Expert service by our 12,000

professional repair specialists.

➢Unlimited service and no charge for

parts and labor on all covered

repairs.

➢“No-lemon” guarantee – replacement

of your covered product if more than

three product failures occur within

twelve months.

➢Product replacement if your covered

product cannot be fixed.

➢Annual Preventive Maintenance

Check at your request – no extra

charge.

➢Fast help by phone – non-technical

and instructional assistance on

products repaired in your home, plus

convenient repair scheduling.

➢Power surge protection against

electrical damage due to power

fluctuations.

➢Rental reimbursement if repair of

your covered product takes longer

than promised.

Once you purchase the Agreement, a

simple phone call is all that it takes for

you to schedule service. You can call

anytime day or night, or schedule a

service appointment online.

Sears has over 12,000 professional

repair specialists, who have access to

over 4.5 million quality parts and

accessories. That is the kind of

professionalism you can count on to

help prolong the life of your new

purchase for years to come. Purchase

your Master Protection Agreement

today!

Some limitations and exclusions apply.

For prices and additional information,

call 1-800-827-6655.

Sears Installation Service

For Sears guaranteed professional

installation of home appliances and

items like garage door openers and

water heaters, in the U.S.A. call

1-800-MY-HOME®.

Maintenance agreements

IN CANADA

Your purchase has added value because

you can depend on Sears HomeCentral®

for service. With over 2,400 service

technicians and access to over 900,000

parts and accessories, we have the

tools, parts, knowledge and skills to

ensure our pledge: We Service What

We Sell.

Your Kenmore®appliance is designed,

manufactured and tested to provide

years of dependable operation. Yet any

major appliance may require service

from time to time. The Sears

Maintenance Agreement offers you an

outstanding service program, affordably

priced.

Sears Maintenance Agreement

➢Is your way to buy tomorrow’s service

at today’sprice.

➢Eliminates repair bills resulting from

normal wear and tear.

➢Provides for non-technical and

instructional assistance.

➢Even if you don’t need repairs,

provides an annual Preventive

Maintenance Check, at your request,

to ensure that your appliance is in

proper running condition.

Some limitations apply. For information

concerning Sears Canada Maintenance

Agreements, call 1-800-361-6665.

Product record

In the space below record the model

and serial numbers and purchase date

of your refrigerator.You will find the

model and serial number sticker inside

the refrigerator section on the left wall.

Model Number: 596. _______________

Serial Number: ____________________

Purchase Date: ____________________

Keep this booklet and your Sears

sales receipt in a safe place for future

reference.

Reverse Osmosis

Water Systems

Some Reverse Osmosis home

water systems cause low water

pressure. Low water pressure

can affect the water and ice

dispensing system by causing

small or hollow ice cubes and

slow water flow from the

dispenser. Service problems

related to the home’s Reverse

Osmosis water system are not

covered by the warranty.

Warranty

One Year Limited Warranty

When installed, operated and

maintained according to all

instructions supplied with the

product, if this appliance fails due to

adefect in material or workmanship

within one year from the date of

purchase, call 1-800-4-MY-HOME®

to arrange for free repair.

If this appliance is used for other

than private family purposed, this

warranty applies for only 90 days

from the date of purchase.

This warranty covers only defects

in material and workmanship.

Sears will NOT pay for:

1. Expendable items that can wear

out from normal use, including

but not limited to filters, belts,

light bulbs, and bags.

2. A service technician to instruct

the user in correct product

installation, operation or

maintenance.

3. A service technician to clean or

maintain this product.

4. Damage to or failure of this

product if it is not installed,

operated or maintained according

to all instructions supplied with

the product.

5. Damage to or failure of this

product resulting from accident,

abuse, misuse or use for other

than its intended purpose.

6. Damage to or failure of this

product caused by the use of

detergents, cleaners, chemicals

or utensils other than those

recommended in all instructions

supplied with the product.

7. Damage to or failure of parts or

systems resulting

from unauthorized modifications

made to this

product.

Disclaimer of implied warranties;

limitation of remedies

Customer’s sole and exclusive

remedy under this limited warranty

shall be product repair as provided

herein. Implied warranties, including

warranties of merchantability or

fitness for a particular purpose, are

limited to one year or the shortest

period allowed by law. Sears shall

not be liable for incidental or

consequential damages. Some

states and provinces do not allow

the exclusion or limitation of

incidental or consequential

damages, or limitations on the

duration of implied warranties or

merchantability or fitness, so these

exclusions or limitations may not

apply to you.

This warranty applies only while this

appliance is used in the United

States and Canada.

This warranty gives you specific

legal rights, and you may also have

other rights which vary from state to

state.

Sears, Roebuck and Co., Dept.

817WA, Hoffman Estates, IL 60179

Sears Canada Inc., Toronto,

Ontario, Canada

M5B 2B8

Warranty

ENGLISH FRANÇAIS ESPAÑOL

Contents

Important Safety Information ......................................................................................2

What You Need to Know About Safety Instructions...................................................2

Protection Agreements ................................................................................................3

Master Protection Agreements – U.S.A.....................................................................3

Maintenance Agreements – Canada .........................................................................3

Warranty.....................................................................................................................4

Product Record ..........................................................................................................4

Installing Your Refrigerator ....................................................................................6-11

Measuring the Opening .............................................................................................6

Transporting Your Refrigerator...................................................................................6

Selecting the Best Location .......................................................................................6

How to Install and Remove Handles .........................................................................7

How to Remove the Hinges, Doors and Drawer .......................................................8

How to Reverse the Hinges, Doors and Drawer .......................................................9

How to Replace the Hinges, Doors and Drawer........................................................9

How to Connect the Water Supply...........................................................................10

How to Level Your Refrigerator ................................................................................11

Setting and Maintaining Proper Temperatures........................................................12

Initial Control Settings..............................................................................................12

Adjusting the Controls..............................................................................................12

Fresh Food Storage.................................................................................................12

Frozen Food Storage...............................................................................................12

Fresh Food Features.............................................................................................13-14

Interior Shelves ........................................................................................................13

Door Storage............................................................................................................13

Climate-Controlled Drawers.....................................................................................14

Storage Drawers ......................................................................................................14

Freezer Features .........................................................................................................15

Automatic Ice Maker ................................................................................................15

Shelves ....................................................................................................................15

Drawers....................................................................................................................15

Door Storage............................................................................................................15

Hints and Care .......................................................................................................16-17

How to Clean Your Refrigerator ...............................................................................16

How to Remove Odors from Refrigerator ................................................................17

Energy Saving Ideas................................................................................................17

How to Remove and Replace Light Bulbs...............................................................17

Normal Operating Sounds .........................................................................................18

Troubleshooting ....................................................................................................19-20

Operation ............................................................................................................19-20

Ice and Water...........................................................................................................20

Français .......................................................................................................................21

Español........................................................................................................................41

Service ..........................................................................................................Back Cover

Contents

Installing your refrigerator

Your refrigerator was packed carefully

for shipment. Remove and discard shelf

packaging and tape. Do not remove the

serial plate.

Measuring the opening

A one-half inch (1⁄2") of air space must be

provided for the top and the back of the

refrigerator. When installing your

refrigerator, measure carefully.

Subflooring or floor coverings (i.e.

carpet, tile, wood floors, rugs) may make

your opening smaller than anticipated.

Some clearance may be gained by

using the leveling procedure under

How to Level Your Refrigerator

(page 11).

IMPORTANT: If refrigerator is to be

installed into a recess where top of

refrigerator is completely covered, use

dimensions from floor to top of hinge

cap to verify proper clearance.

Selecting the best

location

Observe these points when choosing the

final location for your refrigerator:

➢DO NOT install refrigerator near

oven, radiator or other heat source. If

not possible, shield refrigerator with

cabinet material.

➢DO NOT install where temperature

falls below 55° F (13° C). Malfunction

may occur at this temperature.

➢To assure proper door closure, follow

the leveling instructions in the

section, How to Level Your

Refrigerator (page 11).

Transporting your

refrigerator

Follow these tips when moving the

refrigerator to final location:

➢NEVER transport refrigerator on its

side. If an upright position is not

possible, lay refrigerator on its back.

Allow refrigerator to sit upright for

approximately 30 minutes prior to

plugging refrigerator in to assure oil

returns to the compressor. Plugging

refrigerator in immediately may cause

damage to internal parts.

➢Use an appliance dolly when moving

refrigerator. ALWAYS truck

refrigerator from its side or

back–NEVER from its front.

➢Protect outside finish of refrigerator

during transport by wrapping cabinet

in blankets or inserting padding

between the refrigerator and dolly.

➢Secure refrigerator to dolly firmly with

straps or bungee cords. Thread

straps through handles when

possible. DO NOT overtighten. Over-

tightening restraints may dent or

damage outside finish.

ENGLISH FRANÇAIS ESPAÑOL

How to install and

remove handles

For easier installation, some

refrigerators may have been delivered

with the handles off. Please see the

interior of the fresh food section to

locate the handle assembly.

Handle design may vary from

refrigerator to refrigerator. Please

reference the instructions for the

appropriate handle design below.

Before handle installation, remove all

packaging and tape.

FRESH FOOD HANDLE

Installing Front-Mounted Handle

1. Remove 1⁄4"hex head

screws from door face

with hex head driver.

Remove Phillips screw

from top of door.

• If reversing door,remove door plugs

from opposite side of door and

insert in screw holes.

2. Align handle holes with screw

holes on door face

and secure with 2

door face screws

from step 1.

NOTE: Do not reinstall top screw at

this step.

3. Locate handle trim in

literature pack and install

over top and bottom of

handle, as illustrated.

• Secure top handle trim

with remaining screw

removed in step 1.

• Snap bottom trim over bottom

portion of handle.

* Fasteners may require either a T-15 Torx®driver or a Phillips screwdriver.

Torx®is a registered trademark of Textron Inc.

FREEZER HANDLE

Installing Partial-Width Handle

➢Remove screws from

the top of door.

➢Install handle by

fastening with

screws removed

from the top of door.

• If reversing freezer

door, remove door

plugs from opposite top edge of

door and insert into screw holes.

Removing Partial-Width Handle

➢Remove handle

screws.*

• Retain screws for

later replacement.

Installing Full-Width Handle

➢Remove the screws

on the top of door.

➢Install handle by

fastening with

screws* removed

from edge of door.

Removing Full-Width Handle

➢Remove handle by

removing screws*

from handle.

• Retain screws for later

replacement.

Removing Front-Mounted Handle

1. Remove top handle trim

by removing top handle

screw.

• Retain trim and screw

for later replacement.

2. Pry bottom handle trim

from handle with

screwdriver flat blade

wrapped in masking tape.

• Retain trim for later

replacement.

3. Remove two remaining

handle screws and

remove handle.

• Retain screws for later

replacement.

Installing Side-Mounted Handle

➢Remove screws from the side of the

door.*

➢Install handle by

fastening with the

screws removed

from edge of door.

NOTE: If reversing door,remove door

plugs from opposite side of door and

insert in screw holes.

Removing Side-Mounted Handle

➢Remove handle by

removing three

screws* from side of

door.

• Retain screws for later replacement.

Installing your refrigerator, cont.

How to remove the

hinges, doors and

drawer

Some installations require door removal

to get refrigerator to final location.

5. Lift refrigerator door from center

hinge pin.

6. For freezer door only:

Hold freezer door in

place while removing

center hinge pin with a

5⁄16" hex head driver.

Remove freezer door

from bottom hinge.

• Retain hinge pin for later use.

For freezer drawer only: Remove

center hinge pin with a 5⁄16" hex head

driver.

• Retain hinge pin for later use.

7. Remove Phillips

screws to remove

center hinge.

• Retain all screws

for later use.

8. Remove bottom hinge or stabilizing

bracket with 3⁄8" hex head driver.

•Retain

screws for

later use.

• Lift out

bottom hinge

pin (some

models).

PULLOUT DRAWER

(SOME MODELS)

To avoid electrical shock which can

cause severe personal injury or

death, observe the following:

➢Disconnect power to refrigerator

before removing doors. Connect

power only after replacing doors.

WARNING

To avoid damage to walls and

flooring, protect soft vinyl or other

flooring with cardboard, rugs or other

protective material.

CAUTION

1. Unplug power cord from power

source.

2. Remove toe grille and bottom bracket

cover(s) (page 11).

3. Remove top hinge

cover from refrigerator

door by removing

Phillips screw.

• Retain screw and

cover for

replacement.

4. Unscrew 5⁄16" hex head

screws from top hinge

to remove hinge.

• Retain all screws for

later use.

Toavoid possible injury,product, or

property damage, you will need two

people to perform the following

instructions.

CAUTION

1. Pull drawer open to full extension.

2. Remove lower basket by pressing

inward on basket sides, then lift

basket.

3. Pull upper basket out to full

extension, and lift out to remove.

Press Tab Here

4. Remove Phillips screw from each side

of rail system (some models).

5. Lift top of door to unhook door

supports from rail system. Lift door out

to remove.

ENGLISH FRANÇAIS ESPAÑOL

How to reverse the

hinges, doors and

drawer

1. Perform all steps listed in How to

Remove the Hinges, Doors and

Drawer (page 8).

2. Transfer cabinet

plugs and cabinet

screws to opposite

side of cabinet.

• Remove cabinet

plugs with flat

blade of

screwdriver tip

wrapped in

masking tape.

• Remove center mullion screws with

a5⁄16"hex head driver.

•For freezer door only: Remove

bottom mullion screws with 3⁄8" hex

head driver.

IMPORTANT: When working directly on

doors, place doors on a nonabrasive

surface protected by towels or rugs to

avoid damage to door finish.

3. Transfer door stops from bottom edge

of fresh food door and freezer door

(some models) to

opposite side of

door edge.

• Use a Phillips

screwdriver for

removal and installation.

4. See How to Install and Remove

Handles to remove and reinstall

handles (page 7).

5. Proceed to How to Replace the

Hinges, Doors and Drawer to mount

doors.

How to replace the

hinges, doors and

drawer

1. Install hinge assemblies.

• Install top hinge loosely with 5⁄16"hex

head screws.

• Install center hinge with Phillips

screws.

• Install bottom hinge with 3⁄8"hex

head screws.

2. Insert bottom

hinge pin

(some models).

• Locate bottom

hinge hole

closest to

outside edge

of cabinet,

and insert bottom hinge pin.

Replace any door shims, if present.

3. Replace toe grille and bracket

cover(s). See markings on inside of

toe grille to insure proper placement.

•Snap bottom portion into place

first. Press down on top part of grille

until top portion snaps into place.

4. For freezer door

only: Place hinge

side of freezer

door on bottom

hinge pin. Hold

freezer door

upright while installing center hinge

pin with 5⁄16"hex head driver.

• Replace any applicable door shims.

• Make sure the hinge pin is installed

tightly.

For freezer drawer only: Install

center hinge pin with 5⁄16"hex head

driver.

• Replace any applicable door shims.

• Make sure the hinge pin is installed

tightly.

5. Place hinge side of refrigerator door

on center hinge pin.

6. While holding

refrigerator door

upright, tighten

down top hinge

with 5⁄16"hex head

driver and replace

hinge cover (some

models).

PULLOUT DRAWER

1. Pull both rails out to full extension.

2. Hook door supports into rail tabs, as

illustrated, and lower door into final

position.

3. With drawer pulled out to full

extension, insert lower basket by

aligning tabs on both side of lower

basket with notches in rail assembly.

4. Slide upper basket into unit. Make

sure that rear of basket hooks behind

rail catch.

Installing your refrigerator, cont.

How to connect the

water supply

To reduce the risk of injury or

death, follow basic precautions,

including the following:

➢Read all instructions before

installing device.

➢DO NOT attempt installation if

instructions are not understood or

if they are beyond personal skill

level.

➢Observe all local codes and

ordinances.

➢DO NOT service device unless

specifically recommended in Use

and Care Guide or published user-

repair instructions.

➢Disconnect power to refrigerator

prior to installing device.

WARNING

To avoid property damage or

possible injury, follow basic

precautions, including the

following:

➢Consult a plumber to connect

copper tubing to household

plumbing to assure compliance

with local codes and ordinances.

➢Confirm water pressure to water

valve is between 20 and 100

pounds per square inch. If water

filter is installed, water pressure to

water valve must be a minimum of

35 pounds per square inch.

➢DO NOT use a self-piercing, or 3⁄16"

saddle valve! Both reduce water

flow, become clogged with time,

and may cause leaks if repair is

attempted.

➢Tighten nuts by hand to prevent

cross threading. Finish tightening

nuts with pliers and wrenches. Do

not overtighten.

➢Wait 24 hours before placing

refrigerator into final position to

check and correct any water leaks.

CAUTION

MATERIALS NEEDED

➢1⁄4"outer diameter flexible copper

tubing

➢Brass compression nut and sleeve for

1⁄4"outer diameter copper tubing.

➢Shut-off valve (requires a 1⁄4"hole to

be drilled into water supply before

valve attachment)

➢Adjustable wrench

➢1⁄4"hex nut driver

NOTE: Add 8' to tubing length needed to

reach water supply for creation of

service loop.

1. Create service loop with tubing using

care to avoid kinks in tubing.

2. Remove plastic cap from water valve

inlet port.

3. Place brass nut (A) and sleeve (B) on

copper tube end as illustrated.

4. Place end of copper tubing into water

valve inlet port. Shape tubing slightly –

DO NOT KINK – so that tubing feeds

straight into inlet port.

5. Slide brass nut over sleeve and

screw nut into inlet port. Tighten nut

with wrench.

IMPORTANT: DO NOT overtighten.

Cross threading may occur.

6. Pull on tubing to confirm connection

is secure. Connect tubing to frame

with water tubing clamp (C) and turn

on water supply.Check for leaks and

correct, if present.

7. Monitor water connection for 24

hours. Correct leaks, if necessary.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kenmore Kühlschrank Handbücher

Kenmore

Kenmore Side by side refrigerator Bedienungsanleitung

Kenmore

Kenmore 795.77302.600 Bedienungsanleitung

Kenmore

Kenmore Kenmore Side by Side Refrigerator Bedienungsanleitung

Kenmore

Kenmore 253 Series Bedienungsanleitung

Kenmore

Kenmore 94446 Bedienungsanleitung

Kenmore

Kenmore 106.4113 Series Bedienungsanleitung

Kenmore

Kenmore 795.73969303 Bedienungsanleitung

Kenmore

Kenmore 2305761A Bedienungsanleitung

Kenmore

Kenmore 44823 Bedienungsanleitung

Kenmore

Kenmore 795.72033 Bedienungsanleitung

Kenmore

Kenmore KLBH031A E Series Bedienungsanleitung

Kenmore

Kenmore 795.5185 series Bedienungsanleitung

Kenmore

Kenmore 111.9905 Series Bedienungsanleitung

Kenmore

Kenmore Elite 795.7218 Series Bedienungsanleitung

Kenmore

Kenmore 255.99763 Bedienungsanleitung

Kenmore

Kenmore 795.7303 Series Bedienungsanleitung

Kenmore

Kenmore Counter Depth Side by Side Refrigerator Bedienungsanleitung

Kenmore

Kenmore 2536072100B Bedienungsanleitung

Kenmore

Kenmore 795.7107 Series Bedienungsanleitung

Kenmore

Kenmore 795.5103 Series Bedienungsanleitung

Kenmore

Kenmore 106.5113 Series Bedienungsanleitung

Kenmore

Kenmore 106.5116 Bedienungsanleitung

Kenmore

Kenmore 795.7202 Series Bedienungsanleitung

Kenmore

Kenmore 795.71022.010 Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung