Kenroy Home REFLECTION Installationsanleitung

Care and Instruction Manual

REFLECTION TABLE FOUNTAIN

51047WDG ASSEMBLY INSTRUCTIONS

Thank you for purchasing a Kenroy Home

water feature, you are now only minutes

away from ﬁlling your home or outdoor living

space with peaceful displays. Our guarantee

backs all of our water features, please do

not hesitate to contact our

Customer Support Team for

resolutions to any parts or

installation concerns.

CUSTOMER SUPPORT TEAM

For any additional questions or concerns please contact our

Customer Support Team:

904-642-4340

@KenroyHome

customerorders@kenroyhome.com

51047WDG ASSEMBLY INSTRUCTIONS

Please reference the separate parts list and ensure that

all pieces are included in the package prior to assembly.

To protect the ﬁnish, place all parts

on a soft surface when unpacking.

Choose a location:

is freestanding water feature can be placed in the

center of your space or against a wall.

is water feature is designed for indoor use only.

Do not place on a surface that may be damaged by

water as splashing may occur.

Also consider the location of your power source.

e pump cord reach 6' from the bottom of the

fountain body to the plugs, and should be connected

to a grounded 110V outlet.

For best results the water feature should be placed

on a rm, level surface.

51047WDG ASSEMBLY INSTRUCTIONS

Please carefully open on a soft surface to avoid

damage.

Insert rubber hose through hole of fountain body (A).

Place the decorative river stone (C) onto the bottom

of fountain body (A).

Rubber

hose

51047WDG ASSEMBLY INSTRUCTIONS

Attach the pump (D) to the rubber hose.

Run pump cord out back of basin (B).

Place the fountain body (A) into basin (B).

Rubber

hose

Fill basin (B) with 0.6 gallons of distilled water.

51047WDG ASSEMBLY INSTRUCTIONS

Insert the plug of pump (D)

into the pump transformer (E).

Plug pump transformer (E)

into outlet and turn light and

pump on at switch.

FINAL STEP

Tube

Suction cup

Pump housing

Back cover

Filter/

Front cover

Regulator

Impeller cover

Rotor/Impeller

51047WDG ASSEMBLY INSTRUCTIONS

PUMP SAFETY & TROUBLESHOOTING

To clean the pump

Unplug the pump from the electrical

outlet. Use a small soft brush or place it

If the pump fails to run:

• This pump has an overheating protection feature that will turn o

the pump when it becomes too hot while not covered with water.

It may take a few minutes for the pump to cool down once it is

submerged in water again. Note: the pump may cycle on and o

as it cools and heats if not covered with water.

• Pump may be air locked, unplug and plug pump in several times to

clear trapped air.

• Check circuit breaker, or try a dierent outlet.

• Check tubing for kinks and obstructions.

• Clean out any algae buildup.

• Remove the front cover & impeller cover to access the impeller area.

Turn the rotor to ensure it is not broken or jammed.

With low ow rate, the pump will spew or “burp”:

• Check the water level to make sure the pump is completely

submerged, water should always be above the min ll line (not

all water features include min ll line).

under a water stream to remove debris.

To keep water clean

Periodically change water

to prevent algae buildup.

51047WDG ASSEMBLY INSTRUCTIONS

• Splashing may occur when the fountain is rst turned

on, protect surrounding surfaces as needed.

Do not place the water feature on or near

any surface that can be damaged by water.

• To reduce the risk of electrical shock, always disconnect

the power supply before working with the water feature.

• Keep small children and pets away from the water

feature; they can fall into the water feature and drown.

• Once a week inspect water feature, oor and adjacent

wall for moisture build-up and clean as necessary. This is

especially important for humid environments.

• This water feature is designed for indoor use only.

More information about water features can be found at

youtube.com/kenroyhomefountains.

WATER FEATURE WARNINGS &

TROUBLESHOOTING

• Distilled water is recommended to reduce mineral

deposits, bacteria build up and algae that may damage

the water feature basin and pump.

If abnormal noise is heard during operation (with water):

• Disconnect the power supply and then remove the pump front

cover and impeller cover.

• Use hand to grip the impeller, gently pull the impeller/rotor

assembly out of the pump housing.

• Rinse the impeller/rotor assembly and the cavity with clean water.

If breakage or surface damage is found in the assembly contact

Customer Service for a part replacement.

PUMP SAFETY & TROUBLESHOOTING cont.

What should I consider when selecting a water feature?

In addition to your personal style tastes, be sure you have an area for your

water feature that can be safely exposed to water, as splashing can occur.

Also take into consideration what a water feature can add to your

environment: the sound of owing water or decorative lights.

What kind of water should I use in my water feature?

The best water for your water feature is distilled water. This can help

prevent and reduce bacteria and algae buildup. If you do not use distilled

water, more maintenance will be necessary to keep the water feature clean.

How do I clean my water feature?

Oils, dirts, and algae can all build up on the water feature over time. The

best way to restore your water feature to its original state is to empty all

the water from the water feature and use a mild soap (like dish detergent)

and an acrylic brush to clean all the parts.

The water is not owing evenly over my water feature’s surface. How

do I correct this?

Oil and dirt from your hands or the environment my interrupt proper

water ow. Use the water guiding pad (if included with your model) or

a mildly abrasive scrub pad and mild soap to clean the surface of the

water feature.

How much water do I need to keep in the water feature?

Where possible in our water features, we have included ll lines to help

you visualize the water level required for proper function. If your water

feature does not include ll lines, please check the instruction manual for

water capacity. The most important aspect to keeping your water feature

functioning is to insure the pump is submerged in water at all times to

prevent damage to the pump.

FREQUENTLY ASKED QUESTIONS

51047WDG ASSEMBLY INSTRUCTIONS

FREQUENTLY ASKED QUESTIONS CONTINUED

51047WDG ASSEMBLY INSTRUCTIONS

How often will I need to ll my water feature?

Over time, the water level in your water feature will recede. This is due to

evaporation, and the speed at which your water feature will need to be

lled depends greatly on your environment- the humidity, if your water

feature is in the sun, how often you run the water feature, etc. We

recommend checking the water level before running the water feature to

insure the pump is submerged in water.

I cannot nd my installation instructions. Where can I nd another

copy?

Installation and assembly instructions can be found online at

www.kenroyhome.com

Can lights be turned o separately from the water feature?

Water features that include lights will have a separate plug and switch for

the lights. They do not have to be plugged in or turned on to run the

water feature.

My pump is making a loud noise. How do I x that?

1. Be sure the pump is fully submerged in water. If it is not, and pulling

in air, it will make unwanted noise.

2. Check to make sure the pump is not touching the water feature

anywhere other than the bottom. If it is up against the side wall or

another part, the vibration from the pump can cause unwanted noise.

If moving the pump away from other parts does not work, try placing a

sponge or other soft material between these areas to pad the pump.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenroy Home Freiluftbrunnen Handbücher

Kenroy Home

Kenroy Home PILASTER Installationsanleitung

Kenroy Home

Kenroy Home 50198SMG Bedienungsanleitung

Kenroy Home

Kenroy Home 51014MS Installationsanleitung

Kenroy Home

Kenroy Home 51057CONSOL Installationsanleitung

Kenroy Home

Kenroy Home RIVIERA 51032SNDST Installationsanleitung

Kenroy Home

Kenroy Home KYOTO 51052COPBRZ Installationsanleitung

Kenroy Home

Kenroy Home Breckenridge Installationsanleitung

Kenroy Home

Kenroy Home 51057CON Installationsanleitung

Kenroy Home

Kenroy Home ROYAL Installationsanleitung

Kenroy Home

Kenroy Home 51009SNDST Installationsanleitung

Kenroy Home

Kenroy Home 51046SL Installationsanleitung

Kenroy Home

Kenroy Home VINEYARD Installationsanleitung

Kenroy Home

Kenroy Home 51112COPBL Installationsanleitung

Kenroy Home

Kenroy Home 50720COP Bedienungsanleitung

Kenroy Home

Kenroy Home TUCSON Installationsanleitung

Kenroy Home

Kenroy Home VALE Installationsanleitung

Kenroy Home

Kenroy Home 50048BRZ Bedienungsanleitung

Kenroy Home

Kenroy Home SPILLWAY Installationsanleitung

Kenroy Home

Kenroy Home LINCOLN 51017WDG Installationsanleitung

Kenroy Home

Kenroy Home KNIGHT Installationsanleitung

Kenroy Home

Kenroy Home OSWEGO Installationsanleitung

Kenroy Home

Kenroy Home 51050CON Installationsanleitung

Kenroy Home

Kenroy Home RIDGELAND 51040BL Installationsanleitung

Kenroy Home

Kenroy Home 51039ZC Installationsanleitung

Beliebte Freiluftbrunnen Handbücher anderer Marken

Sunnydaze Decor

Sunnydaze Decor XSS-578 Bedienungsanleitung

Campania International

Campania International Bibendum FT-400 Bedienungsanleitung

Elkay

Elkay FLEXI-GUARD EFHA8 1M Series Installationshandbuch

S.R.Smith

S.R.Smith Color Light Stream 2CLSLBK Bedienungsanleitung

Hozelock Cyprio

Hozelock Cyprio Cascade 1500 Bedienungsanleitung

Campania International

Campania International Juliet Fountain Bedienungsanleitung

YARDART

YARDART FT-155 Bedienungsanleitung

Alpine

Alpine WIN732 Bedienungsanleitung

Campania

Campania Valencia Bedienungsanleitung

Campania International

Campania International FT-320 Bedienungsanleitung

GardenWize

GardenWize SWGSL230 Bedienungsanleitung

Kelkay

Kelkay Easy Fountain Rustic Windmill Bedienungsanleitung

Alpine

Alpine WIN258 Bedienungsanleitung

Bond

Bond Signature Series Bedienungsanleitung

EasyPro

EasyPro Tranquil Décor HBB39 Bedienungsanleitung

Angelo Decor

Angelo Decor Castillo Bedienungsanleitung

Campania International

Campania International Girona FT-102A Bedienungsanleitung

Campania International

Campania International FT-271 Bedienungsanleitung