Kentec Electronics XT+ Bedienungsanleitung

XT+ Releasing Control Unit Operating Instructions

Version 1.00 |December 2018 |MAN-1253KE

Contents|2

Version 1.00 | December 2018 | MAN-1253KE

Contents

Contents 2

User Access Levels 4

Standby Mode 4

Access Level 2 5

Access Level 3 8

Unit Tests 10

General Information 12

Operating Instructions 12

Inspecting Batteries 12

Replacing Standby Batteries 12

Related Documentation 12

Contact Information 14

Emergency Contact 14

Service Contact 15

Contents|3

Version 1.00 | December 2018 | MAN-1253KE

User AccessLevels| 4

Version 1.00 | December 2018 | MAN-1253KE

USER ACCESS LEVELS

Standby Mode

Standby mode indicates that they Enable Keyswitch has not be activated. The LCDscreen will display the following:

Specific functions are restricted when operating the unit in the standby, however this level allows users to perform

simple tests. It also provides options for testing LED indicators of the fascia as well as color composition of the LCD

panel GUI. Refer to Unit Tests for specific feature details.

User AccessLevels| 5

Access Level 2

Insert the key in the Enable Access keyswitch and turn it to the right to obtain Access Level 2. XT+ releasing modules

will ignore Enable Access commands from the Elite RS panel and will enter access level 2 only when their own Enable

Access switch is operated. When the Enable Access keyswitch is turned, the XT+ LCDmenu will display:

Press Enter to disable the extinguishant release outputs. The Disablement and Supervisory LEDs

will illuminate and the buzzers will sound on the XT+module and the Elite RSFACP.

Press Enter to re-enable the outputs and restore the Disablement and Supervisory conditions.

Press Enter to disable the manual release input. The Disablement LED will illuminate and the

buzzers will sound on the XT+module and the Elite RSFACP.

Press Enter to re-enable the input and restore the Disablement condition.

Press Enter to disable the 1st stage relay output. The Disablement LED will illuminate and the

buzzers will sound on the XT+module and the Elite RSFACP.

Version 1.00 | December 2018 | MAN-1253KE

User AccessLevels| 6

Version 1.00 | December 2018 | MAN-1253KE

Press Enter to re-enable the output and restore the Disablement condition.

Press Enter to disable the 2nd stage relay output. The Disablement LED will illuminate and the

buzzers will sound on the XT+module and the Elite RSFACP. The display will show:

Press Enter to re-enable the output and restore the Disablement condition.

Press Enter to disable the released output. The Disablement LED will illuminate and the buzzers

will sound on the XT+module and the Elite RSFACP. The display will show:

Press Enter to re-enable the output and restore the Disablement condition.

Press Enter to disable the extract output. The Disablement LED will illuminate and the buzzers will

sound on the XT+module and the Elite RSFACP. The display will show:

User AccessLevels| 7

Press Enter to re-enable the output and restore the Disablement condition.

Press Enter to turn on the extract output. The buzzer will sound on the Elite RSFACP. The display

will show:

Press Enter to re-enable the output and restore the Disablement condition.

Press Enter to select the Reserve output. When the Reserve output is selected, the Reserve

CylindersLED will be illuminated and the LCDwill display the following:

Press Enter to select the Main output.

Version 1.00 | December 2018 | MAN-1253KE

User AccessLevels| 8

Version 1.00 | December 2018 | MAN-1253KE

Access Level 3

To enter Access Level 3, turn the Enable Access keyswitch and turn the Write Enable switch to the on (left) position. The

following actions are available in Access Level 3:

lSet the extinguishing monitoring level.

lDisplay the number of updates to the module's configuration

lChange the monitoring level of the extinguishing outputs it is necessary to enter access level 3.

To enter Access Level 3, turn the Enable Controls keyswitch on and slide the Write Enable switch to the on position

(left). The # represents the number of configuration updates made to the XT+module.

Press Enter, then (+) until the LCD displays:

The XXX displayed here is the PREVIOUS (factory) level to which the monitoring level had been set.

Press Enter. The LCD will now show:

User AccessLevels| 9

The XXX shown here is the CURRENTmonitoring level detected on the extinguishing output. Press Enter to store that

level. The circuit characteristics are then learned by the unit and a trouble will occur if these change.

Press (+) to display and set the monitoring level for output 2 in the same way as output 1.

Version 1.00 | December 2018 | MAN-1253KE

Unit Tests| 10

Version 1.00 | December 2018 | MAN-1253KE

UNIT TESTS

To perform a lamp, display, and buzzer test from Standby Mode or Access Level 2, press and hold the Exit button. After

several seconds, the following should occur:

lall LEDs will illuminate

lthe buzzer buzzes steadily

lthe LCDwill display the following:

Andere Handbücher für XT+

Inhaltsverzeichnis

Andere Kentec Electronics Steuereinheit Handbücher

Kentec Electronics

Kentec Electronics S793 Technisches Handbuch

Kentec Electronics

Kentec Electronics 723 Technisches Handbuch

Kentec Electronics

Kentec Electronics Taktis TRC00NC-10 Technisches Handbuch

Kentec Electronics

Kentec Electronics S792 Technisches Handbuch

Kentec Electronics

Kentec Electronics Syncro Si Bedienungsanleitung

Kentec Electronics

Kentec Electronics XT+ Bedienungsanleitung

Kentec Electronics

Kentec Electronics Sigma XT Plus Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung