Kentec Electronics XT+ Bedienungsanleitung

XT+ Releasing Control Unit

Installation Manual

UL Version 1.00 |December 2018 |MAN-1252KE

XT+ Releasing Control Unit Installation Manual

Kentec Electronics Ltd

XT+ Releasing Control Unit Installation Manual

UL Version 1.00 |December 2018 |MAN-1252KE

Page 2

CONTENTS

Contents 3

Compliance Information 7

Underwriters Laboratories (UL) 7

NFPA 7

FM Global Technologies LLC (FM APPROVALS) 8

Introduction 9

Technical Support 9

Return Material Authorization (RMA) 9

Warranty Service 10

Advanced Replacements 10

Overview 11

Fascia 11

Buttons 12

LEDStatus Indicators 13

Keyswitches 13

Internal Indicators and Switches 13

Terminals 14

Top 14

Bottom 14

Power Supply 14

Features 15

Batteries 15

Installation 17

Kentec Electronics Ltd

XT+ Releasing Control Unit Installation Manual

UL Version 1.00 |December 2018 |MAN-1252KE

Page 3

XT+ Releasing Control Unit Installation Manual

Preparing for Installation 18

Mounting the XT+ Unit 18

Removing Cabinet Components 19

Replacing Cabinet Components 19

Installing the Power Supply 19

DIPSwitches 21

5.25 Amp Power Supply 21

Status Indicators 22

Connecting Standby Batteries 23

Connecting Field Wiring 24

Networking Multiple XT+Modules 25

24V Power 26

Aux 24V 26

Trouble 26

1st Stage 27

2nd Stage 27

3rd Stage (Released) 27

Supv. / Abort 27

Extract 27

Notification Appliances 28

3rd Stage Alarm 28

2nd Stage Alarm 28

Exting. 1 (Main) and Exting. 2 (Reserve) 28

Bottom Terminals 29

XT+ Releasing Control Unit Installation Manual

Kentec Electronics Ltd

XT+ Releasing Control Unit Installation Manual

UL Version 1.00 |December 2018 |MAN-1252KE

Page 4

CIESerial 30

Status Serial / Status Pow. 30

Access Levels 31

Standby Mode 31

Access Level 2 31

Access Level 3 33

Set the Extinguishant Output Calibration 33

System Startup 35

Setting the Address 35

CIESerial Bus Termination 35

Testing the Installation 35

Testing the Power Supply 35

Lamp, Display, and Buzzer Test 36

Communication Between Elite RS and XT+ 36

Testing Field-Installed Devices 36

Configuration 36

Times Tab 37

Disablements Tab 38

Settings Tab 39

NOTICE TO USERS, INSTALLERS, AUTHORITIES HAVING JURISDICTION, AND OTHER

INVOLVED PARTIESULCompliance Limitations 41

Appendix A: Specifications 42

Terminal Electrical Ratings 43

Appendix B: Maintenance and Repair 44

Kentec Electronics Ltd

XT+ Releasing Control Unit Installation Manual

UL Version 1.00 |December 2018 |MAN-1252KE

Page 5

XT+ Releasing Control Unit Installation Manual

Batteries 44

Replacing Battery Leads 44

Replacing Standby Batteries 44

Removing the Standby Batteries 44

Installing the Standby Batteries 45

Fuses 45

Battery Lead Fuse on 5.25A Power Supply 45

Replacing the Power Supply Fuse 45

Removing the Power Supply Fuse 45

Installing the Replacement Power Supply Fuse 46

Troubleshooting 46

Appendix C: Equipment List 48

Model Numbers 48

Replacement Parts 49

Accessories 50

Compatible Releasing Devices 51

Special Releasing Accessories 52

Index 53

XT+ Releasing Control Unit Installation Manual

Kentec Electronics Ltd

XT+ Releasing Control Unit Installation Manual

UL Version 1.00 |December 2018 |MAN-1252KE

Page 6

COMPLIANCE INFORMATION

Underwriters Laboratories (UL)

Fire Alarm Equipment

Kentec Electronics Ltd

The XT+ Releasing Control Unit is suitable as follows:

nTypes of signaling services are automatic fire alarm and manual fire alarm

nClass B for Notification Appliance Circuits

nProtected Premises Unit (PPU) for Local Service, Remote Station Service, Center Station Service, Pro-

prietary Service, Auxiliary Service when used with the Elite RS FACP.

NFPA

Install this product in accordance with NFPA 13, NFPA 72, NFPA70, and NEC 70 and all local codes.

Install SLC detectors with spacing as specified in section NFPA 72. Units employing "multiple detector

operation" shall include guidelines for installing of a minimum of two detectors in each protected space and to

reduce the detector installation spacing to 0.7 times the linear spacing in accordance with National Fire Alarm

Code, NFPA 72.

All field wiring should be installed using fire rated cables according to the NFPA 72. Riser conductors shall be

installed in accordance with the survivability from attack by fire requirements in National Fire Alarm Code, NFPA

72, Section 12.3. Riser conductors shall employ either a 2 hour rated cable system, or meet requirements

approved by the AHJ.

This product, when used with XT+ Releasing modules K1711-xx & K1712-xx, satisfies releasing operation

under:

• Carbon dioxide extinguishing systems, NFPA 12

• Halon 1301 fire extinguishing systems, NFPA 12A

• Sprinkler systems, NFPA 13

• Water spray fixed systems for fire protection, NFPA 15

• Foam-water sprinkler and foam-water spray systems, NFPA 16

Kentec Electronics Ltd

XT+ Releasing Control Unit Installation Manual

UL Version 1.00 |December 2018 |MAN-1252KE

Page 7

XT+ Releasing Control Unit Installation Manual

• Dry chemical extinguishing systems, NFPA 17

• Wet chemical extinguishing systems, NFPA 17A

• Water mist, NFPA 750

• Clean agent fire extinguishing systems, NFPA 2001

• Fixed Aerosol fire extinguishing systems, NFPA 2010

FM Global Technologies LLC (FM APPROVALS)

Kentec Electronics Ltd

XT+ Releasing Control Unit Installation Manual

Kentec Electronics Ltd

XT+ Releasing Control Unit Installation Manual

UL Version 1.00 |December 2018 |MAN-1252KE

Page 8

INTRODUCTION

Technical Support

For technical support, contact Kentec Electronics, Ltd at +44 (0)1322 222121 or techsupport@kentec.co.uk.

Prior to contacting technical support, have the following information available:

nProduct part number

nPurchase order or order number

nProduct serial number

nCurrent function of the product

nExpected function of the product

nInstallation of the product

Return Material Authorization (RMA)

Contact Technical Support to obtain an RMAfor any product to be returned. Returns will not be accepted

without an accompanying RMA number. An RMA number is assigned when:

lTech Support acknowledges a possible product failure.

lA product was damaged during shipping

lAn incorrect product was shipped

lAn order was placed using an incorrect part number *

lAn order was placed using an incorrect part quantity *

lAn order is no longer required *

* Restocking fees may apply.

All returned products are tested to confirm operating failures experienced in the field. If the product is found to be

functional, contractors must absorb expenses for return shipping, as well as the cost and shipping of the

advanced replacement product.

Prominently display the RMA number on all packages sent for return. Ship all return products to:

Attention: RMA # _____________

Kentec Electronics, Ltd

Units 25-27 Fawkes Avenue

Kentec Electronics Ltd

XT+ Releasing Control Unit Installation Manual

UL Version 1.00 |December 2018 |MAN-1252KE

Page 9

XT+ Releasing Control Unit Installation Manual

Questor, Dartford

Kent. DA1 1JQ

United Kingdom

Warranty Service

Technical Support can replace or repair a defective product when the original purchase is within the warranty

period defined in the sales contract. Check your contract for more information, or contact your sales

representative about your specific warranty period.

Advanced Replacements

Products that fail to operate in the field can be replaced quickly using the advanced replacement process. The

advanced replacement process is available to all contractors who maintain an acceptable line of credit.

Initiate the advanced replacement process by requesting an RMA number from a Tech Support representative.

Advanced replacements can be shipped to your location when the product is covered under warranty and when

a replacement product is in stock.

lAdvanced replacements can be expedited at the request of the contractor. Shipping costs associated with

this process are the responsibility of the contractor.

lProducts returned using the advanced replacement process must be received within 30 days of the RMA

issue date.

XT+ Releasing Control Unit Installation Manual

Kentec Electronics Ltd

XT+ Releasing Control Unit Installation Manual

UL Version 1.00 |December 2018 |MAN-1252KE

Page 10

Andere Handbücher für XT+

Inhaltsverzeichnis

Andere Kentec Electronics Steuereinheit Handbücher

Kentec Electronics

Kentec Electronics S792 Technisches Handbuch

Kentec Electronics

Kentec Electronics Taktis TRC00NC-10 Technisches Handbuch

Kentec Electronics

Kentec Electronics XT+ Bedienungsanleitung

Kentec Electronics

Kentec Electronics 723 Technisches Handbuch

Kentec Electronics

Kentec Electronics Sigma XT Plus Bedienungsanleitung

Kentec Electronics

Kentec Electronics Syncro Si Bedienungsanleitung

Kentec Electronics

Kentec Electronics S793 Technisches Handbuch

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung