Kenwood BLP40 Bedienungsanleitung

English 2 - 9

Nederlands 10 - 18

Français 19 - 27

Deutsch 28 - 35

Italiano 36 - 43

Português 44 - 52

Español 53 - 61

Dansk 62 - 69

Svenska 70 - 77

Norsk 78 - 85

Suomi 86 - 93

Türkçe 94 - 101

Ïesky 102 - 109

Magyar 110 - 118

Polski 119 - 128

Ekkgmij 129 - 138

Slovenčina 139 - 147

Українська 148 - 157

´¸∂w

851 - 561

TYPE BLP40

Kenwood Ltd

New Lane

Havant

Hampshire

PO9 2NH

kenwoodworld.com

instructions

istruzioni

instrucciones

Bedienungsanleitungen

gebruiksaanwijzing

Instrukcja obsługi

instruções

safety

lRead these instructions carefully and retain

for future reference.

lRemove all packaging and any labels.

lIf the cord is damaged it must, for safety

reasons, be replaced by KENWOOD or an

authorised KENWOOD repairer.

l

DO NOT process hot ingredients.

l SCALD RISK: Hot ingredients must

be allowed to cool to room temperature

before placing in the goblet or before

blending.

lDo not operate your appliance for

longer than the times specified

below without a rest period.

Processing continuously for

longer periods can damage your

appliance.

Function/

Attachment

Maximum

Operation

Time

Rest Period

Between

Operations

Blender 60 secs Unplug the

appliance

and allow to

cool down for

15 minutes

Multi Mill 60 secs

Grinding Mill 60 secs

Grating Mill 60 secs

lSwitch off and unplug:

before fitting or removing parts;

when not in use;

before cleaning.

lNever fit the blade unit to the power

unit without the blender goblet or mill

jar fitted.

lAlways unplug the appliance before putting

your hands or utensils in the goblet.

5 7

lAlways take care when handling the blade

assembly and avoid touching the cutting

edge of the blades when cleaning.

lOnly operate the blender with the lid in

place.

lOnly use the goblet with the blade

assembly supplied.

lNever let the power unit, cord or plug get

wet.

lNever use a damaged appliance. Get it

checked or repaired: see ‘service and

customer care’.

lNever use an unauthorised attachment.

lNever leave the appliance unattended

when it is operating.

lWhen removing the blender or mill from the

power unit:

wait until the blades have completely

stopped;

do not accidentally unscrew the goblet

or mill jar/lid from the blade assembly.

lNever run the blender empty.

lNever blend more than the maximum

capacity stated in the recommended

usage chart.

lSmoothie recipes - never blend frozen

ingredients that have formed a solid mass

during freezing, break it up before adding

to the goblet.

lDo not process hard spices such as

Nutmeg or Turmeric root as they may

damage the blade.

lDo not use the blender as a storage

container. Keep it empty before and after

use.

lAlways use the blender on a secure, dry

level surface.

before plugging in

lMake sure your electricity supply is

the same as the one shown on the

underside of the appliance.

l This appliance conforms to EC

Regulation 1935/2004 on materials

and articles intended to come into

contact with food.

before using for the first

time

l Wash the parts: see ‘care and

cleaning’.

key

blender

a filler cap

b locking lid

c goblet

d blender sealing ring

e blender blade unit

f power unit

g cord storage

h speed + pulse control

i ice crushing button

multi mill (if supplied)

j multi mill jar

k multi mill sealing ring

l multi mill blade unit

grinding mill (if supplied)

mmill lid

ngrinding mill blade assembly

grating mill (if supplied)

o mill lid

p grating mill blade assembly

lNever place this appliance on or near a

hot gas or electric burner or where it could

touch a heated appliance.

lMisuse of your appliance can result in

injury.

lThis appliance shall not be used by

children. Keep the appliance and its cord

out of reach of children.

lAppliances can be used by persons with

reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning use

of the appliance in a safe way and if they

understand the hazards involved.

lOnly use the appliance for its intended

domestic use. Kenwood will not accept

any liability if the appliance is subject to

improper use, or failure to comply with

these instructions.

to use your blender

Use your blender for soups, drinks,

pâtés, mayonnaise, breadcrumbs,

biscuit crumbs, chopping nuts and

crushing ice.

1 Fit the blender sealing ring dinto

the blender blade unit e - ensuring

the seal is located correctly in the

grooved area.

lLeaking will occur if the seal

is damaged or incorrectly

fitted.

2 Screw the blade assembly onto

the goblet – ensuring the blade

assembly is fully tightened 1.

Refer to the graphics on the

underside of the blade unit as

follows:

- unlocked position

- locked position

3 Put your ingredients into the

goblet.

4 Put the filler cap in the lid.

5 Fit the lid to the goblet and turn

clockwise to lock.

6 Place the blender onto the power

unit with the handle situated to the

right hand side and lock by turning

clockwise until you hear a “click”

lThe appliance will not work

if the blender is incorrectly

fitted.

7 Select a speed (refer to the

recommended usage chart).

blender hints

lTo blend dry ingredients - cut into

pieces, remove the filler cap, then

with the appliance running, drop

the pieces down one by one. Keep

your hand over the opening. For

best results empty regularly.

lThe processing of spices is not

recommended as they may

damage the plastic parts.

lWhen making mayonnaise, put all

the ingredients, except the oil, into

the blender. Remove the filler cap.

Then, with the appliance running,

add the oil slowly through the hole

in the lid.

lThick mixtures, e.g. pâtés and dips,

may need scraping down. If the

mixture is difficult to process, add

more liquid.

to use your multi mill

(if supplied)

Use your multi mill for milling herbs,

nuts, coffee beans and purees.

1 Put your ingredients into the jar j.

Fill it no more than half full.

2 Fit the multi mill sealing ring

kinto the multi mill blade unit

l - ensuring the seal is located

correctly in the grooved area.

lEnsure that the seal is fitted

correctly.

3 Turn the blade unit lupside

down. Lower it into the jar, blades

down 3. Turn anti-clockwise to

lock.

4 Place the mill onto the power unit

and lock by turning clockwise until

you hear a “click” 4.

5 Select a speed or use the pulse

control.

to use your grinding

mill (if supplied)

Suitable for grinding spices, coffee

beans and processing ginger,

garlic and chillies.

1 Place your ingredients into the

blade assembly n.

2 Fit the lid m and turn anti-

clockwise to lock 5.

3 Place the mill onto the power unit

and lock by turning clockwise until

you hear a “click” 6.

4 Select a speed or use the pulse

(P) control.

to use your grating mill

(if supplied)

Suitable for grating parmesan

cheese, nutmeg, coconut and

dried fruit.

1 Place your ingredients into the

blade assembly p.

2 Fit the lid o and turn anti-

clockwise to lock 7.

3 Place the mill onto the power unit

and lock by turning clockwise until

you hear a “click” 6.

4 Select a speed or use the pulse

(P) control.

blender recommended usage chart

Do not operate your appliance for longer than the

times specified below without a rest period. Processing

continuously for longer periods can damage your appliance.

speed usage/food items max. quantity

1Frothing milk 1 litre

Light mixes e.g. batters, milkshakes,

scrambled egg 1 litre

2 - 3 Soups & drinks 1.6 litres

Thicker mixes e.g. pâtés

Mayonnaise 3 eggs +

450ml oil

Smoothie drinks

Place the fresh fruit and liquid ingredients in 800ml

first (includes yoghurt, milk and fruit juices) liquid

Then add ice or frozen ingredients (includes

frozen fruit, ice or ice cream)

Ice crushing - operate in short bursts until 6 cubes

crushed to the desired consistency. (125g)

(P) Operates the motor in a start/stop action.

pulse The pulse will operate for as long as it is held in –

position.

hints

lFor optimum performance when

processing spices we recommend

that you do not process more than

50g at a time in the mill.

lWhole spices retain their flavour

for a much longer time than

ground spices so it is best to grind

a small quantity fresh at a time to

retain the flavour.

lTo release the maximum flavour

and essential oils whole spices are

best roasted prior to milling.

lBaby food/purees - allow cooked

food to cool to room temperature

before processing in the mill.

care and cleaning

lAlways switch off, unplug and

dismantle before cleaning.

lEmpty the goblet before

unscrewing it from the blade unit.

lDo not immerse the blade unit in

water.

power unit

lWipe with a damp cloth, then dry.

lDo not immerse the power unit in

water.

lStore excess cord in the storage

area at the back of the power

unit g.

blade assemblies

blender and multi mill

lRemove the blade unit from the

goblet or mill by turning to the

unlock position to release.

grinding and grating mills

lRemove the lid from the blade

assembly by turning in a clockwise

direction.

1 blender/multi mill: remove and

wash the sealing ring.

2 Do not touch the sharp blades –

brush them clean using hot soapy

water, then rinse thoroughly under

the tap. Do not immerse the

blade unit in water.

3 Leave to dry upside down.

mill recommended usage chart

Do not operate your appliance for longer than the

times specified below without a rest period. Processing

continuously for longer periods can damage your appliance.

ingredients mill max qty speed operating

time

Herbs - best chopped Multi 15g 3 5 – 10 secs

when clean and dry

Nuts Multi or Grinding 50g 3 10 – 15 secs

Coffee Beans Multi or Grinding 50g 3 30 secs

Baby Foods & Purees Multi 50g 3 30 secs

Spices – such as black Grinding 50g 3 30 – 60 secs

peppercorns, cardamom

seeds, cumin seeds,

coriander seeds, fennel

seeds, whole cloves etc.

Chillies Grinding 30g 3 10 secs

Fresh Root Ginger Grinding 30g 3 10 secs

Garlic Grinding 4 cloves 3 10 secs

Parmesan Cheese – cut Grating 60g 3 10secs

into 1cm cubes

Dried Fruit Grating 50g 3 10 secs

Coconut Grating 50g 3 20 secs

Nutmeg Grating 2 3 40 secs

other parts

Wash by hand, then dry.

Item Suitable for

dishwashing

Filler cap 4

Locking lid 4

Goblet 4

Blender sealing

ring

Multi mill

sealing ring

Blade unit 8

Multi mill jar 4

Mill lid 4

Grinding mill

blade assembly

Grating mill

blade assembly

service and customer

care

l If you experience any

problems with the operation

of your appliance, before

requesting assistance refer to

the “troubleshooting guide”

section in the manual or visit

www.kenwoodworld.com.

l Please note that your product

is covered by a warranty, which

complies with all legal provisions

concerning any existing warranty

and consumer rights in the

country where the product was

purchased.

l If your Kenwood product

malfunctions or you find any

defects, please send it or bring

it to an authorised KENWOOD

Service Centre. To find up to date

details of your nearest authorised

KENWOOD Service centre visit

www.kenwoodworld.com or the

website specific to your Country.

lDesigned and engineered by

Kenwood in the UK.

lMade in China.

IMPORTANT INFORMATION

FOR CORRECT DISPOSAL

OF THE PRODUCT IN

ACCORDANCE WITH THE

EUROPEAN DIRECTIVE ON

WASTE ELECTRICAL AND

ELECTRONIC EQUIPMENT

(WEEE)

At the end of its working life, the

product must not be disposed of as

urban waste.

It must be taken to a special local

authority differentiated waste

collection centre or to a dealer

providing this service.

Disposing of a household appliance

separately avoids possible negative

consequences for the environment

and health deriving from inappropriate

disposal and enables the constituent

materials to be recovered to obtain

significant savings in energy and

resources. As a reminder of the need

to dispose of household appliances

separately, the product is marked

with a crossed-out wheeled dustbin.

9 10

troubleshooting guide

Problem Cause Solution

The Blender will not No Power Check blender

operate. plugged in.

Blender not assembled Check blade unit is

correctly. fully tightened to

the goblet.

Blender leaking from blade Seal missing. Check seal is fitted

assembly. Seal incorrectly fitted. correctly and not

Seal damaged. damaged. To obtain

a replacement seal

see “service &

customer care”.

Blender seal missing from The seal is packed Unscrew goblet and

blade unit when removed pre-fitted to the blade check that seal is

from packaging. unit. fitted to blade unit.

To obtain a

replacement seal

see “service &

customer care”.

If none of the above solve the problem see “Service & Customer Care”.

9 10

veiligheid

lLees deze instructies zorgvuldig door en

bewaar ze voor toekomstig gebruik.

lVerwijder de verpakking en alle labels.

lAls het snoer beschadigd is, moet het

om veiligheidsredenen door Kenwood

of een door Kenwood geautoriseerd

reparatiebedrijf vervangen worden.

lVerwerk NOOIT hete

ingrediënten.

lKANS OP BRANDWONDEN: Laat hete

ingrediënten altijd tot kamertemperatuur

afkoelen voordat u ze in de beker plaatst

of verwerkt.

lGebruik uw apparaat nooit langer

dan hieronder staat aangegeven

zonder een pauze. Als u het

apparaat langere tijd zonder

pauze gebruikt, kan dat schade

veroorzaken.

Functie /

hulpstuk

Maximale

inschakeltijd

Pauze

tussen twee

inschakelingen

Blender 60 sec. Haal de

stekker uit het

stopcontact en

laat het apparaat

15 minuten

afkoelen

Multimole 60 sec.

Maalmolen

60 sec.

Raspmolen

60 sec.

lSchakel het apparaat uit en haal de

stekker uit het stopcontact:

voordat u onderdelen aanbrengt of

verwijdert;

Nederlands

Vouw de voorpagina a.u.b. uit voordat u begint te lezen.

Op deze manier zijn de afbeeldingen zichtbaar

Andere Handbücher für BLP40

Inhaltsverzeichnis

Sprachen:

Andere Kenwood Mixer Handbücher

Kenwood

Kenwood 717456900000 Bedienungsanleitung

Kenwood

Kenwood CH590 Bedienungsanleitung

Kenwood

Kenwood HB680 series Bedienungsanleitung

Kenwood

Kenwood BL745 Bedienungsanleitung

Kenwood

Kenwood SB250 series Bedienungsanleitung

Kenwood

Kenwood Smoothie SB266 Kurzanleitung

Kenwood

Kenwood BLX50 series Installationsanleitung

Kenwood

Kenwood Smoothie Concert SB250 Series Kurzanleitung

Kenwood

Kenwood HB150 series Bedienungsanleitung

Kenwood

Kenwood kMix triblade System HDX75 Bedienungsanleitung

Kenwood

Kenwood BL330 series Bedienungsanleitung

Kenwood

Kenwood BL330 series Bedienungsanleitung

Kenwood

Kenwood FDP22 Bedienungsanleitung

Kenwood

Kenwood Chef and Major KM630 series Bedienungsanleitung

Kenwood

Kenwood HB600 series Installationsanleitung

Kenwood

Kenwood BL460 Series Bedienungsanleitung

Kenwood

Kenwood AWFPATDX01 Bedienungsanleitung

Kenwood

Kenwood BL700 series Bedienungsanleitung

Kenwood

Kenwood BLP41 Bedienungsanleitung

Kenwood

Kenwood kMix triblade HB850 series Bedienungsanleitung

Kenwood

Kenwood blm80 Bedienungsanleitung

Kenwood

Kenwood BLM600SI Bedienungsanleitung

Kenwood

Kenwood BL430 series Bedienungsanleitung

Kenwood

Kenwood Smoothie cocktail SB320 series Bedienungsanleitung

Beliebte Mixer Handbücher anderer Marken

ROTOR

ROTOR 1125.201 Bedienungsanleitung

Braun

Braun Multiquick 5 Vario series Bedienungsanleitung

ARENDO

ARENDO MIRA 305424 Bedienungsanleitung

CHEF-BUILT

CHEF-BUILT CCB-3500 Bedienungsanleitung

Viconte

Viconte VC-4406 Bedienungsanleitung

Oster

Oster BLSTAB-CB0 Bedienungsanleitung

HOFFEN

HOFFEN MC-3005 Bedienungsanleitung

Sunbeam

Sunbeam 4182 Bedienungsanleitung

Black & Decker

Black & Decker BLC18750DM Bedienungsanleitung

Bialetti

Bialetti FMX35 Bedienungsanleitung

Black & Decker

Black & Decker BL8000 Bedienungsanleitung

Duronic

Duronic BL530 Bedienungsanleitung

Exquisit

Exquisit MS 3002 wes Bedienungsanleitung

Lumme

Lumme LU-KP1891A Bedienungsanleitung

Binatone

Binatone HB-735 Bedienungsanleitung

Moulinex

Moulinex LM936E10 Bedienungsanleitung

Oster

Oster VERSA Installations- und Betriebshandbuch

Ninja

Ninja NN210Q Bedienungsanleitung