Kenwood NEXEDGE NX-220 Bedienungsanleitung

VHF DIGITAL TRANSCEIVER

NX-220

UHF DIGITAL TRANSCEIVER

NX-320/ NX-322

800MHz DIGITAL TRANSCEIVER

NX-420

INSTRUCTION MANUAL

Thank You

We are grateful you have chosen KENWOOD for your land

mobile radio applications.

This instruction manual covers only the basic operations of your

NEXEDGE portable radio. Ask your dealer for information on any

customized features they may have added to your radio.

noTices To The user

◆Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

◆Illegal operation is punishable by ﬁne and/or imprisonment.

◆Refer service to qualiﬁed technicians only.

Safety: It is important that the operator is aware of, and

understands, hazards common to the operation of any

transceiver.

The AMBE+2TM voice coding Technology embodied in this product

is protected by intellectual property rights including patent rights,

copyrights and trade secrets of Digital Voice Systems, Inc. This

voice coding Technology is licensed solely for use within this

Communications Equipment. The user of this Technology is explicitly

prohibited from attempting to extract, remove, decompile, reverse

engineer, or disassemble the Object Code, or in any other way

convert the Object Code into a human-readable form. U.S. Patent

Nos. #5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050,

#5,630,011 and #5,581,656

Firmware Copyrights

The title to and ownership of copyrights for ﬁrmware embedded in

KENWOOD product memories are reserved for JVC KENWOOD

Corporation.

PrecauTions

• Donotchargethetransceiverandbatterypackwhentheyarewet.

• Ensurethattherearenometallicitemslocatedbetweenthe

transceiver and the battery pack.

• DonotuseoptionsnotspeciedbyKENWOOD.

• Ifthedie-castchassisorothertransceiverpartisdamaged,donot

touch the damaged parts.

• Ifaheadsetorheadphoneisconnectedtothetransceiver,reduce

the transceiver volume. Pay attention to the volume level when

turning the squelch off.

• Donotplacethemicrophonecablearoundyourneckwhilenear

machinery that may catch the cable.

• Donotplacethetransceiveronunstablesurfaces.

• Ensurethattheendoftheantennadoesnottouchyoureyes.

• Whenthetransceiverisusedfortransmissionformanyhours,the

radiator and chassis will become hot. Do not touch these locations

when replacing the battery pack.

• Alwaysswitchthetransceiverpoweroffbeforeinstallingoptional

accessories.

• ThechargeristhedevicethatdisconnectstheunitfromtheAC

mains line. The AC plug should be readily accessible.

Turn the transceiver power off in the following locations:

• Inexplosiveatmospheres(inammablegas,dustparticles,metallic

powders, grain powders, etc.).

• Whiletakingonfuelorwhileparkedatgasolineservicestations.

• Nearexplosivesorblastingsites.

• Inaircrafts.(Anyuseofthetransceivermustfollowtheinstructions

and regulations provided by the airline crew.)

• Whererestrictionsorwarningsarepostedregardingtheuseof

radio devices, including but not limited to medical facilities.

• Nearpersonsusingpacemakers.

iii

• Donotdisassembleormodifythetransceiverforanyreason.

• Donotplacethetransceiveronornearairbagequipmentwhilethe

vehicleisrunning.Whentheairbaginates,thetransceivermay

be ejected and strike the driver or passengers.

• Donottransmitwhiletouchingtheantennaterminalorifany

metallic parts are exposed from the antenna covering. Transmitting

at such a time may result in a high-frequency burn.

• Ifanabnormalodororsmokeisdetectedcomingfromthe

transceiver, switch the transceiver power off immediately, remove

the battery pack from the transceiver, and contact your KENWOOD

dealer.

• Useofthetransceiverwhileyouaredrivingmaybeagainsttrafc

laws. Please check and observe the vehicle regulations in your

area.

• Donotexposethetransceivertoextremelyhotorcoldconditions.

• Donotcarrythebatterypackwithmetalobjects,astheymayshort

the battery terminals.

• Dangerofexplosionifthebatteryisincorrectlyreplaced;replace

only with the same type.

• When attaching a commercial strap to the transceiver, ensure

that the strap is durable. In addition, do not swing the transceiver

aroundbythestrap;youmayinadvertentlystrikeandinjureanother

person with the transceiver.

• Ifacommerciallyavailableneckstrapisused,takecarenottolet

the strap get caught on nearby machine.

• When operating the transceiver in areas where the air is dry, it is

easytobuildupanelectriccharge(staticelectricity).Whenusing

an earphone accessory in such conditions, it is possible for the

transceiver to send an electric shock through the earphone and to

your ear. We recommend you use only a speaker/microphone in

these conditions, to avoid electric shocks.

• Todisposeofbatteries,besuretocomplywiththelawsand

regulations in your country or region.

Information concerning the battery pack:

Thebatterypackincludesammableobjectssuchasorganicsolvent.

Mishandlingmaycausethebatterytoruptureproducingamesor

extreme heat, deteriorate, or cause other forms of damage to the

battery. Please observe the following prohibitive matters.

• Do not disassemble or reconstruct battery!

The battery pack has a safety function and protection circuit to

avoid danger. If they suffer serious damage, the battery may

generateheatorsmoke,rupture,orburstintoame.

• Do not short-circuit the battery!

 Donotjointhe+and–terminalsusinganyformofmetal(such

as a paper clip or wire). Do not carry or store the battery pack

incontainersholdingmetalobjects(suchaswires,chain-

necklace or hairpins). If the battery pack is short-circuited,

excessivecurrentwillowandthebatterymaygenerateheat

orsmoke,rupture,orburstintoame.Itwillalsocausemetal

objects to heat up.

• Do not incinerate or apply heat to the battery!

If the insulator is melted, the gas release vent or safety function

is damaged, or the electrolyte is ignited, the battery may

generateheatorsmoke,rupture,orburstintoame.

• Do not leave the battery near ﬁres, stoves, or other heat

generators (areas reaching over 80°C/ 176°F)!

If the polymer separator is melted due to high temperature,

an internal short-circuit may occur in the individual cells and

the battery may generate heat or smoke, rupture, or burst into

ame.

• Avoid immersing the battery in water or getting it wet by

other means!

If the battery becomes wet, wipe it off with a dry towel before

use. If the battery’s protection circuit is damaged, the battery

maychargeatextremecurrent(orvoltage)andanabnormal

chemical reaction may occur. The battery may generate heat or

smoke,rupture,orburstintoame.

• Do not charge the battery near ﬁres or under direct

sunlight!

If the battery’s protection circuit is damaged, the battery

maychargeatextremecurrent(orvoltage)andanabnormal

chemical reaction may occur. The battery may generate heat or

smoke,rupture,orburstintoame.

• Use only the speciﬁed charger and observe charging

requirements!

 Ifthebatteryischargedinunspeciedconditions(underhigh

temperature over the regulated value, excessive high voltage or

current over regulated value, or with a remodelled charger), it

may overcharge or an abnormal chemical reaction may occur.

The battery may generate heat or smoke, rupture, or burst into

ame.

• Do not pierce the battery with any object, strike it with an

instrument, or step on it!

This may break or deform the battery, causing a short-circuit.

The battery may generate heat or smoke, rupture, or burst into

ame.

• Do not jar or throw the battery!

An impact may cause the battery to leak, generate heat

orsmoke,rupture,and/orburstintoame.Ifthebattery’s

protection circuit is damaged, the battery may charge at an

abnormalcurrent(orvoltage),andanabnormalchemical

reaction may occur.

• Do not use the battery pack if it is damaged in any way!

The battery may generate heat or smoke, rupture, or burst into

ame.

• Do not solder directly onto the battery!

If the insulator is melted or the gas release vent or safety

function is damaged, the battery may generate heat or smoke,

rupture,orburstintoame.

• Do not reverse the battery polarity (and terminals)!

When charging a reversed battery, an abnormal chemical

reaction may occur. In some cases, an unexpected large

amountofcurrentmayowupondischarging.Thebatterymay

generateheatorsmoke,rupture,orburstintoame.

• Do not charge the battery for longer than the speciﬁed

time!

If the battery pack has not ﬁnished charging even after the

regulated time has passed, stop it. The battery may generate

heatorsmoke,rupture,orburstintoame.

• Do not place the battery pack into a microwave or high

pressure container!

The battery may generate heat or smoke, rupture, or burst into

ame.

• Keep ruptured and leaking battery packs away from ﬁre!

 Ifthebatterypackisleaking(orthebatteryemitsabadodor),

immediatelyremoveitfromammableareas.Electrolyte

leaking from battery can easily catch on ﬁre and may cause the

batterytogeneratesmokeorburstintoame.

• Do not use an abnormal battery!

If the battery pack emits a bad odor, appears to have different

coloring, is deformed, or seems abnormal for any other reason,

remove it from the charger or operating equipment and do not

use it. The battery may generate heat or smoke, rupture, or

burstintoame.

• Do not reverse-charge or reverse-connect the battery!

The battery pack has positive and negative poles. If the battery

pack does not smoothly connect with a charger or operating

equipment,donotforceit;checkthepolarityofthebattery.If

the battery pack is reverse-connected to the charger, it will be

reverse-charged and an abnormal chemical reaction may occur.

The battery may generate heat or smoke, rupture, or burst into

ame.

• Do not touch a ruptured and leaking battery!

If the electrolyte liquid from the battery gets into your eyes,

wash your eyes out with fresh water as soon as possible,

without rubbing your eyes. Go to the hospital immediately. If

left untreated, it may cause eye-problems.

CONTENTS

UNPACKING AND CHECKING EQUIPMENT.....................................1

PREPARATION .................................................................................... 2

ORIENTATION ..................................................................................... 6

PROGRAMMABLE AUXILIARY FUNCTIONS ..................................10

BASIC OPERATIONS ........................................................................ 12

SCAN .................................................................................................15

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION ............. 17

TRUNKING CALLS (ANALOG)......................................................... 20

ADVANCED OPERATIONS ............................................................... 22

BACKGROUND OPERATIONS ......................................................... 27

UNPACKING AND CHECKING EQUIPMENT

Note: These unpacking instructions are for use by your KENWOOD

dealer, an authorized KENWOOD service facility, or the factory.

Carefully unpack the transceiver. If any items are missing or

damaged, ﬁle a claim with the carrier immediately.

SUPPLIED ACCESSORIES

Antenna (NX-420 only)......................................................................... 1

Belt clip................................................................................................. 1

Speaker/ microphone jacks cap............................................................ 1

Speaker/ microphone locking bracket................................................... 1

Stopper (types I and II only) ................................................................. 1

Instruction manual ................................................................................1

Note: Inquire at your dealer for a stopper.

1Match the guides of the battery pack with the grooves on

the upper rear of the transceiver, then ﬁrmly press the

battery pack in place.

2Lock the safety catch to prevent accidentally releasing the

battery pack.

3To remove the battery pack, lift the safety catch, press the

release latch, then pull the battery pack away from the

transceiver.

Note:

◆For battery pack charging procedures and usage, refer to the

battery charger Instruction Manual.

◆The battery pack is not charged at the factory; charge it before

use.

◆Install the battery pack after cleaning the battery pack contacts

and the transceiver terminals.

◆Before charging a battery pack that is attached to the

transceiver, ensure that the safety catch is ﬁrmly closed.

PREPARATION

INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK

Safety catch

Release latch

Andere Handbücher für NEXEDGE NX-220

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenwood Transceiver Handbücher

Kenwood

Kenwood TS-570D, TS-570S Bedienungsanleitung

Kenwood

Kenwood TK-690 Series Bedienungsanleitung

Kenwood

Kenwood ProTalk Digital TK-3401DE Bedienungsanleitung

Kenwood

Kenwood TH-25A Series Bedienungsanleitung

Kenwood

Kenwood NX-740H Bedienungsanleitung

Kenwood

Kenwood TS-930S Bedienungsanleitung

Kenwood

Kenwood TS-140S Bedienungsanleitung

Kenwood

Kenwood TM-401A Bedienungsanleitung

Kenwood

Kenwood TS-950 series Bedienungsanleitung

Kenwood

Kenwood TK-2160 Bedienungsanleitung

Kenwood

Kenwood TH-235A Bedienungsanleitung

Kenwood

Kenwood TK-7180-K Bedienungsanleitung

Kenwood

Kenwood TM-D710A Bedienungsanleitung

Kenwood

Kenwood TK-3202 Bedienungsanleitung

Kenwood

Kenwood TK 3230 - FreeTalk XLS UHF Bedienungsanleitung

Kenwood

Kenwood TH-25A Series Bedienungsanleitung

Kenwood

Kenwood NX-840H Bedienungsanleitung

Kenwood

Kenwood TR-7850 Bedienungsanleitung

Kenwood

Kenwood TS-480 Bedienungsanleitung

Kenwood

Kenwood TM-281A Bedienungsanleitung

Kenwood

Kenwood TH-22A Bedienungsanleitung

Kenwood

Kenwood TK-6110 Bedienungsanleitung

Kenwood

Kenwood TS-890S Bedienungsanleitung

Kenwood

Kenwood TS-670 Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung

Standard Horizon

Standard Horizon HX320E Bedienungsanleitung

Em-Trak

Em-Trak A100 Bedienungsanleitung

HPE

HPE Aruba QSFP28 Bedienungsanleitung

RADTEL

RADTEL RT-490 Bedienungsanleitung