Kenwood TK-278G Bedienungsanleitung

INSTRUCTION MANUAL

TK-270G/ TK-370G

TK-278G/ TK-378G

MANUAL DE INSTRUCCIONES

INSTRUCTION MANUAL

KENWOOD CORPORATION

09 08 07 06 05 04 03 02 01 00

VHF FM TRANSCEIVER/

UHF FM TRANSCEIVER

TRANSCEPTOR DE FM VHF/

TRANSCEPTOR DE FM UHF

VHF FM TRANSCEIVER/

UHF FM TRANSCEIVER

TK-270G/ TK-370G

TK-278G/ TK-378G

TK-270G/ TK-370G

TK-278G/ TK-378G

TK-270G/ TK-370G

TK-278G/ TK-378G

VHF FM TRANSCEIVER/

UHF FM TRANSCEIVER

INSTRUCTION MANUAL

ENGLISH

WARNING:

EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.)

Turn off your transceiver while taking on fuel, or while parked in

gasoline service stations.

◆

GOVERNMENT LAW PROHIBITS THE OPERATION OF

UNLICENSED RADIO TRANSMITTERS WITHIN THE

TERRITORIES UNDER GOVERNMENT CONTROL.

◆

ILLEGAL OPERATION IS PUNISHABLE BY FINE OR

IMPRISONMENT OR BOTH.

◆

REFER SERVICE TO QUALIFIED TECHNICIANS ONLY.

SAFETY: It is important that the operator is aware of

and understands hazards common to the operation of

any transceiver.

THANK YOU

We are grateful you chose KENWOOD for your land

mobile radio applications. We believe this easy-to-use

transceiver will provide dependable communications to

keep personnel operating at peak efficiency.

KENWOOD transceivers incorporate the latest in

advanced technology. As a result, we feel strongly that

you will be pleased with the quality and features of this

product.

MODELS COVERED BY THIS MANUAL

•TK-270G: VHF FM Transceiver

•TK-278G: VHF FM Transceiver

•TK-370G: UHF FM Transceiver

•TK-378G: UHF FM Transceiver

NOTICES TO THE USER

One or more of the following statements may be

applicable:

FCC WARNING

This equipment generates or uses radio frequency energy. Changes

or modifications to this equipment may cause harmful interference

unless the modifications are expressly approved in the instruction

manual. The user could lose the authority to operate this equipment if

an unauthorized change or modification is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY

THE FCC

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can generate radio frequency

energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that the interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that

to which the receiver is connected.

•

Consult the dealer for technical assistance.

ATTENTION (U.S.A. Only):

The RBRC Recycle seal found on KENWOOD

nickel-cadmium (Ni-Cd) battery packs indicates

KENWOOD’s voluntary participation in an industry

program to collect and recycle Ni-Cd batteries after

their operating life has expired. The RBRC program

is an alternative to disposing Ni-Cd batteries with

your regular refuse or in municipal waste streams,

which is illegal in some areas.

For information on Ni-Cd battery recycling in your area, call (toll free)

1-800-8-BATTERY (1-800-822-8837).

KENWOOD’s involvement in this program is part of our commitment

to preserve our environment and conserve our natural resources.

PRECAUTIONS

Observe the following precautions to prevent fire,

personal injury, and transceiver damage.

• Do not modify this transceiver for any reason.

• Do not expose the transceiver to long periods of

direct sunlight, nor place it close to heating

appliances.

• Do not place the transceiver in excessively dusty,

humid, and/or wet areas, nor on unstable surfaces.

• If an abnormal odor or smoke is detected coming

from the transceiver, switch OFF the power

immediately and remove the optional battery pack

from the transceiver. Contact your KENWOOD

dealer.

iii

CONTENTS

UNPACKING AND CHECKING EQUIPMENT................... 1

Supplied Accessories ...................................... 1

PREPARATION .................................................. 3

Charging the Optional NiCd Battery Pack .................. 3

Installing/ Removing the Optional NiCd Battery Pack ..... 4

Installing the Antenna ..................................... 5

Installing the Belt Clip ..................................... 5

Installing the Hand Strap .................................. 5

Installing the Cap over the Speaker/ Microphone Jacks ... 6

Installing the Optional Speaker/ Microphone ........... 6

GETTING ACQUAINTED ........................................ 7

Display ...................................................... 9

PROGRAMMABLE AUXILIARY FUNCTIONS ................ 10

OPERATING BASICS ...........................................11

Switching Power ON/OFF ................................11

Adjusting the Volume .....................................11

Selecting a Group or Channel ...........................11

Adjusting the Squelch Level .............................12

Placing a Call ..............................................13

Receiving a Call ...........................................13

CHANNEL SCAN ...............................................14

Priority Scan ...............................................15

Channel Lockout ..........................................15

Revert Channel ............................................15

DTMF CALLS ...................................................16

Manual Dialling ............................................ 16

Storing DTMF Numbers .................................... 17

Confirming Stored DTMF Numbers .....................17

Dialling Stored DTMF Numbers .........................18

Clearing Stored DTMF Numbers .......................... 18

Redialling .................................................. 18

CODE SQUELCH ...............................................19

Receiving ..................................................19

Transmitting ...............................................20

SELECTIVE CALL ..............................................21

Receiving ..................................................22

Transmitting ...............................................23

2-TONE SIGNALLING ..........................................24

Receiving ..................................................24

Transmitting ...............................................25

AUXILIARY FUNCTIONS ......................................26

Selecting an Output Power ...............................26

Time-out Timer (TOT) ....................................26

Busy Channel Lockout (BCL) .............................27

Talk-Around ................................................27

Reverse ....................................................28

Battery Voltage Level .....................................28

Lamp .......................................................28

Monitor .....................................................29

Beginning/ End of Transmission Signal ................29

UNPACKING AND CHECKING EQUIPMENT

Note: The following unpacking instructions are for use by your

KENWOOD dealer, an authorized KENWOOD service facility, or the

factory.

Carefully unpack the transceiver. We recommend that

you identify the items listed in the following table before

discarding the packing material. If any items are

missing or have been damaged during shipment, file a

claim with the carrier immediately.

■Supplied Accessories

Belt clip

Speaker/ microphone

jacks cap

Screw set Speaker/ microphone

locking bracket

Antenna

(TK-270G/ TK-278G)

(M and C markets only)

Hand strap bracket

(C market only) Hand strap

(C market only)

Antenna

(TK-370G/ TK-378G)

(M and C markets only)

metI rebmuntraP ytitnauQ

annetnA CdnaM( stekram )ylno

)M(G072-KT5X-9760-09T

)2M(G072-KT5X-0860-09T

)M(G073-KT5X-2860-09T

)3M,2M(G073-KT5X-3860-09T

)4M(G073-KT5X-4860-09T

)C(G872-KT5X-0470-09T

)2C(G872-KT5X-2470-09T

)C(G873-KT5X-3470-09T

)4C(G873-KT5X-4470-09T

pilctleB3X-4260-92J1

tekcarbpartsdnaH )ylnotekramC( 4X-3932-12J1

)ylnotekramC(partsdnaH5X-9330-96J1

teswercS5X-2102-99N1

skcajenohporcim/rekaepS pac 3X-1530-90B1

enohporcim/rekaepS tekcarbgnikcol 4X-3944-12J1

dracytnarraW )ylnotekramK( ––1

launamnoitcurtsnIXX-3111-26B1

Note: A market code (K, M, or C) can be found on the label

attached to the package box.

PREPARATION

■Charging the Optional NiCd Battery Pack

The optional battery pack is not charged at the

factory; charge it before use (refer to the battery

pack instruction manual).

◆

DO NOT RECHARGE THE BATTERY PACK IF IT IS

ALREADY FULLY CHARGED. DOING SO MAY CAUSE THE

LIFE OF THE BATTERY PACK TO SHORTEN OR THE

BATTERY PACK MAY BE DAMAGED.

◆

AFTER RECHARGING THE BATTERY PACK, DISCONNECT

IT FROM THE CHARGER. IF THE CHARGER POWER IS

RESET (TURNED ON AFTER BEING TURNED OFF),

RECHARGING WILL STARTAGAIN AND THE BATTERY

PACK WILL BECOME OVERCHARGED.

Initially charging the battery pack after purchase or

extended storage (greater than 2 months) will not

bring the battery pack to its normal operating

capacity. After repeating the charge/discharge cycle

two or three times, the operating capacity will

increase to normal.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenwood Transceiver Handbücher

Kenwood

Kenwood TK-2300-V4P - Protalk 2Way 2Watt 4Channel Vhf... Bedienungsanleitung

Kenwood

Kenwood TK-U100V Bedienungsanleitung

Kenwood

Kenwood TS-950SDX Bedienungsanleitung

Kenwood

Kenwood ProTalk tk-3501 Bedienungsanleitung

Kenwood

Kenwood TK-7360 Bedienungsanleitung

Kenwood

Kenwood TH-21A Bedienungsanleitung

Kenwood

Kenwood TK-5210 Bedienungsanleitung

Kenwood

Kenwood TS-440S Bedienungsanleitung

Kenwood

Kenwood TS-990SHF Technisches Handbuch

Kenwood

Kenwood TK-2302 Bedienungsanleitung

Kenwood

Kenwood TH-235A Bedienungsanleitung

Kenwood

Kenwood TK-760G series Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3301 Bedienungsanleitung

Kenwood

Kenwood Trio TS-520 Bedienungsanleitung

Kenwood

Kenwood Nexedge NX-5200 Bedienungsanleitung

Kenwood

Kenwood TM-D710E Bedienungsanleitung

Kenwood

Kenwood TS-930S Bedienungsanleitung

Kenwood

Kenwood TS-930S Bedienungsanleitung

Kenwood

Kenwood TK 3230 - FreeTalk XLS UHF Montage- und Bedienungsanleitung

Kenwood

Kenwood TK-260G Bedienungsanleitung

Kenwood

Kenwood TK-8100 Bedienungsanleitung

Kenwood

Kenwood TH-41A Bedienungsanleitung

Kenwood

Kenwood Nexedge NX-5200 Bedienungsanleitung

Kenwood

Kenwood M) Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung

Standard Horizon

Standard Horizon HX320E Bedienungsanleitung

Em-Trak

Em-Trak A100 Bedienungsanleitung

HPE

HPE Aruba QSFP28 Bedienungsanleitung