Kenwood TK 3230 - FreeTalk XLS UHF Bedienungsanleitung

09 08 07 06 05 04 03 02

UHF FM TRANSCEIVER

TK-3230

INSTRUCTIoN MANUAl

Thank You

We are grateful for your purchase of this Kenwood product and

welcome you to the Business Radio Service (BRS). Your

Kenwood 2-way Business Radio is called a “transceiver”,

meaning “transmitter & receiver”. We believe this easy-to-use

transceiver will provide you with dependable and reliable

communications. This Kenwood transceiver is a precision device.

Treat it with care, and you will enjoy years of reliable operation.

FeaTures

• Lightweight and compact design using a lithium-ion battery pack,

with a sturdy, polycarbonate body and a spring-loaded belt clip.

• 122 tone/code settings for each channel, allowing you to ignore

unwanted calls.

• Privacy Talk scrambles all your voice messages, giving you

complete privacy for your conversations.

• FleetSync operation, allowing a variety of call types.

• Automatic battery power saver, providing you with longer battery

usage.

• Battery power level indicator with low battery power warning.

• Key lock and Super Lock prevent you from accidentally changing

your transceiver settings.

• Ten different calling alert tones allows you to identify yourself to

your group before you begin speaking.

• Hands free operation when using an optional headset.

operaTing CondiTions

Open locations (no obstructions) Up to 5 miles (8 km)

Residential areas (near buildings) Up to 1.5 miles (2.4 km)

In steel/ concrete reinforced buildings

Up to 225,000 ft2(20,900 m2)

In high rises Up to 17 oors

Note: The listed ranges are based on eld testing and may vary

with your operating conditions.

FCC LiCense inFormaTion

Your Kenwood radio operates on communications frequencies

which are subject to FCC (Federal Communications

Commission) Rules & Regulations. FCC Rules require that all

operators using Private Land Mobile radio frequencies obtain a

radio license before operating their equipment. Application for

license must be made on FCC form 601.

FAX: Forms can be obtained by fax from the FCC

Fax-On-Demand system. Call 1-202-418-0177 from your

fax machine to request the documents.

MAIL: Forms can be ordered by telephone, and will be sent to

you by rst class mail. Call the FCC Forms Hotline at

1-800-418-FORM (1-800-418-3676).

INTERNET: Form 601 and instructions can be downloaded

from the FCC Forms website at:

http://www.fcc.gov/formpage.html

Before lling out your Form 601 application Technical Data

section, you must decide which frequency (or frequencies) you

will operate on. Refer to the frequency chart on page 54.

Questions? Call the FCC for license application questions at

1-888-CALL-FCC (1-888-225-5322).

ChanneL spaCing

The ProTalkxls uses 12.5 kHz channel spacing, as per the

regulations of the FCC. Transceivers using 12.5 kHz channel

spacing may not have optimal sound quality when used with

transceivers using 25 kHz channel spacing.

iii

noTiCes To The user

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

One or more of the following statements may be applicable:

FCC WARNING

This equipment generates or uses radio frequency energy. Changes

or modications to this equipment may cause harmful interference

unless the modications are expressly approved in the instruction

manual. The user could lose the authority to operate this equipment if

an unauthorized change or modication is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can generate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that the interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer for technical assistance.

SAFETY INFORMATION:

Your wireless hand-held portable transceiver has been designed using

a low power transmitter.

When the PTT switch is pressed, the transceiver generates radio

frequency (RF) electromagnetic energy (EME).

This transceiver is designed to comply with the FCC Report and Order

FCC 96-326 (August, 1996).

• Do not transmit for more than 50% of the total operating time.

Transmitting for over 50% of the operating time may exceed

the FCC RF exposure compliance requirements. Transmission

occurs while you are pressing the PTT switch and is conrmed by

the LED that lights red while transmitting.

• To transmit, speak into the speaker area in your normal voice

while holding the transceiver upright and keep the antenna at

least 2 inches (5 cm) from your head and body.

• When using a headset, ensure that the antenna is at least

2 inches (5 cm) away from your body whenever you are

transmitting.

• Use only Kenwood genuine accessories. Unauthorized

modications, or attachments may damage the transceiver and

violate FCC rules and regulations.

ATTENTION (U.S.A. Only):

The RBRC Recycle seal found on Kenwood

lithium-ion (Li-ion) battery packs indicates

Kenwood’s voluntary participation in an industry

program to collect and recycle Li-ion batteries

after their operating life has expired. The RBRC

program is an alternative to disposing Li-ion

batteries with your regular refuse or in municipal

waste streams, which is illegal in some areas.

For information on Li-ion battery recycling in your area, call (toll free)

1-800-8-BATTERY (1-800-822-8837).

Kenwood’s involvement in this program is part of our commitment to

preserve our environment and conserve our natural resources.

• Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

• Illegal operation is punishable by ne and/or imprisonment.

• Refer service to qualied technicians only.

Safety: It is important that the operator is aware of and

understands hazards common to the operation of any

transceiver.

preCauTions

• Do not charge the transceiver and battery pack when they are

wet.

• Ensure that there are no metallic items located between the

transceiver and the battery pack.

• Do not use options not specied by Kenwood.

• If the die-cast chassis or other transceiver part is damaged, do

not touch the damaged part.

• If a headset or headphone is connected to the transceiver,

reduce the transceiver volume. Pay attention to the volume

level when turning the squelch off.

• Do not place the microphone cable around your neck while

near machinery that may catch the cable.

• Do not place the transceiver on unstable surfaces.

• Ensure that the end of the antenna does not touch your eyes.

• When the transceiver is used for transmission for many hours,

the radiator and chassis will become hot. Do not touch these

locations when replacing the battery pack.

• Do not immerse the transceiver in water.

• Always switch the transceiver power off when installing

optional accessories.

Turn the transceiver power off in the following locations:

• In explosive atmospheres (inammable gas, dust particles,

metallic powders, grain powders, etc.).

• While taking on fuel or while parked at gasoline service stations.

• Near explosives or blasting sites.

• In aircrafts. (Any use of the transceiver must follow the

instructions and regulations provided by the airline crew.)

• Where restrictions or warnings are posted regarding the use of

radio devices, including but not limited to medical facilities.

• Near persons using pacemakers.

• Do not disassemble or modify the transceiver for any reason.

• Do not place the transceiver on or near airbag equipment while

the vehicle is running. When the airbag inates, the transceiver

may be ejected and strike the driver or passengers.

• Do not transmit while touching the antenna terminal or if

any metallic parts are exposed from the antenna covering.

Transmitting at such a time may result in a high-frequency burn.

• If an abnormal odor or smoke is detected coming from the

transceiver, switch the transceiver power off immediately, remove

the battery pack from the transceiver, and contact your Kenwood

dealer.

• Use of the transceiver while you are driving may be against trafc

laws. Please check and observe the vehicle regulations in your

area.

• Do not expose the transceiver to extremely hot or cold conditions.

• Do not carry the battery pack (or battery case) with metal objects,

as they may short the battery terminals.

• When operating the transceiver in areas where the air is dry, it is

easy to build up an electric charge (static electricity). When using

an earphone accessory in such conditions, it is possible for the

transceiver to send an electric shock through the earphone and

to your ear. We recommend you use only a speaker/microphone

in these conditions, to avoid electric shocks.

vii

Contents

UNPACKING AND CHECKING EQUIPMENT ...........................1

supplied Accessories ............................................................1

PREPARATION..........................................................................2

BAttery pAck precAutions ....................................................2

instAlling/ removing the BAttery pAck..................................7

chArging the BAttery pAck...................................................8

instAlling/ removing the Belt clip ........................................9

instAlling/ removing optionAl Accessories .........................10

ORIENTATION ......................................................................... 11

displAy................................................................................12

GETTING STARTED................................................................13

CHANNEL FREQUENCY SETUP............................................15

QUIET TALK/ DIGITAL QUIET TALK .......................................16

SCANNING THE CHANNELS .................................................17

revert chAnnel ..................................................................18

MONITORING A CHANNEL.....................................................19

squelch level ....................................................................19

VOICE OPERATED TRANSMISSION (VOX) ..........................20

vox operAtion...................................................................20

vox gAin level..................................................................20

vox delAy time..................................................................21

trAnsmit inhiBit While receiving .........................................22

vox proceed tone ............................................................23

PRIVACY TALK ........................................................................24

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION.........25

cAll key setup...................................................................25

cAll Alert tone..................................................................26

selcAll (selective cAlling) ................................................28

OPERATING FEATURES ........................................................37

trAnsmit poWer ..................................................................37

compAnder ..........................................................................38

viii

key lock.............................................................................38

super lock .........................................................................39

displAy BAcklight................................................................40

mic sense ...........................................................................41

time-out timer ....................................................................41

BAttery sAver.....................................................................42

BAttery level indicAtor ......................................................43

incoming cAll notificAtion ..................................................45

Busy chAnnel lockout (Bcl) .............................................46

Beep tone...........................................................................46

mode reset timer...............................................................47

RESETTING THE TRANSCEIVER..........................................48

OPTIONAL ACCESSORIES ....................................................49

MENUS ....................................................................................50

QT TONES/ DQT CODES........................................................52

CHANNEL FREQUENCIES .....................................................54

SPECIFICATIONS ...................................................................55

TROUBLESHOOTING GUIDE.................................................56

UNPACKING AND CHECKING EQUIPMENT

Carefully unpack the transceiver. We recommend you identify

the items listed in the following table before discarding the

packing material. If any items are missing or have been

damaged during shipment, file a claim with the carrier

immediately.

Supplied AcceSSorieS

Item Part Number Quantity

KBH-14 Belt clip J29-0736-XX 1

Screw set N99-2063-XX 1

KNB-46L battery pack W09-1038-XX 1

KSC-37 rapid charger W08-0995-XX 1

Warranty card — 1

Instruction manual B62-1976-XX 1

KBH-14 Belt clip Screw set

KNB-46L battery pack KSC-37 rapid charger

Andere Handbücher für TK 3230 - FreeTalk XLS UHF

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenwood Transceiver Handbücher

Kenwood

Kenwood TR-7400A Bedienungsanleitung

Kenwood

Kenwood TS-890S Bedienungsanleitung

Kenwood

Kenwood TK-2180 Bedienungsanleitung

Kenwood

Kenwood TM-D710GA Bedienungsanleitung

Kenwood

Kenwood TS-850S Bedienungsanleitung

Kenwood

Kenwood TK-90 Bedienungsanleitung

Kenwood

Kenwood TS-50S Bedienungsanleitung

Kenwood

Kenwood TK-7108 Bedienungsanleitung

Kenwood

Kenwood NX-840H Bedienungsanleitung

Kenwood

Kenwood TS-930S Bedienungsanleitung

Kenwood

Kenwood TK-2160 Bedienungsanleitung

Kenwood

Kenwood TS-670 Bedienungsanleitung

Kenwood

Kenwood TS-830S Bedienungsanleitung

Kenwood

Kenwood NX-3400 Bedienungsanleitung

Kenwood

Kenwood TS-515 Bedienungsanleitung

Kenwood

Kenwood TS-520SE Bedienungsanleitung

Kenwood

Kenwood TK-980 Bedienungsanleitung

Kenwood

Kenwood TS-520S Bedienungsanleitung

Kenwood

Kenwood TM-241A Bedienungsanleitung

Kenwood

Kenwood TK-3000 K Bedienungsanleitung

Kenwood

Kenwood TK-2170 SERIES Bedienungsanleitung

Kenwood

Kenwood TS-990S Bedienungsanleitung

Kenwood

Kenwood TR-7850 Bedienungsanleitung

Kenwood

Kenwood TK-7302 Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung

Standard Horizon

Standard Horizon HX320E Bedienungsanleitung

Em-Trak

Em-Trak A100 Bedienungsanleitung

HPE

HPE Aruba QSFP28 Bedienungsanleitung

RADTEL

RADTEL RT-490 Bedienungsanleitung