Kenwood TK-5210 Bedienungsanleitung

09 08 07 06 05 04 03 02 01 00

INSTRUCTION MANUAL

VHF P25 TRANSCEIVER

TK-5210

UHF P25 TRANSCEIVER

TK-5310

Thank You

We are grateful you have chosen Kenwood for your land mobile

radio applications. We believe this easy-to-use transceiver will

provide dependable communications to keep personnel operating

at peak efficiency.

Kenwood transceivers incorporate the latest in advanced

technology. As a result, we feel strongly that you will be pleased

with the quality and features of this product.

Models Covered bY This Manual

The models listed below are covered by this manual:

512 channels/ 50 zones model

TK-5210 (K/K2/K3): VHF P25 Transceiver

TK-5310 (K/K2/K3/K4/K5/K6): UHF P25 Transceiver

64 channels/ 16 zones model

TK-5210 (K7): VHF P25 Transceiver

TK-5310 (K7): UHF P25 Transceiver

noTiCes To The user

◆Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

◆Illegal operation is punishable by fine and/or imprisonment.

◆Refer service to qualified technicians only.

SAFETY: It is important that the operator is aware of and

understands hazards common to the operation of any transceiver.

This device made under license under one or more of the following

US Patents: 4,590,473; 4,636,791; 4,716,407; 4,972,460; 5,148,482;

5,185,796; 5,271,017; 5,377,229; 5,502,767.

The IMBE™ voice coding Technology embodied in this product is protected

by intellectual property rights including patent rights, copyrights, and trade

secrets of Digital Voice Systems, Inc. This voice coding Technology is

licensed solely for use within this Communications Equipment. The user

of this Technology is explicitly prohibited from attempting to decompile,

reverse engineer, or disassemble the Object Code, or in any other way

convert the Object Code into a human-readable form.

One or more of the following statements may be applicable:

FCC WARNING

This equipment generates or uses radio frequency energy.

Changes or modifications to this equipment may cause harmful

interference unless the modifications are expressly approved in the

instruction manual. The user could lose the authority to operate this

equipment if an unauthorized change or modification is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY

THE FCC

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can generate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that the

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of

the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from

that to which the receiver is connected.

•Consult the dealer for technical assistance.

The RBRC Recycle seal found on Kenwood

nickel-cadmium (Ni-Cd) battery packs indicates

Kenwood’s voluntary participation in an industry

program to collect and recycle Ni-Cd batteries

after their operating life has expired. The RBRC

program is an alternative to disposing Ni-Cd

batteries with your regular refuse or in municipal

waste streams, which is illegal in some areas.

For information on Ni-Cd battery recycling in your area, call (toll

free) 1-800-8-BATTERY (1-800-822-8837).

Kenwood’s involvement in this program is part of our commitment

to preserve our environment and conserve our natural resources.

The RBRC Recycle seal found on Kenwood nickel

metal hydride (Ni-MH) battery packs indicates

Kenwood’s voluntary participation in an industry

program to collect and recycle Ni-MH batteries

after their operating life has expired. The RBRC

program is an alternative to disposing Ni-MH

batteries with your regular refuse or in municipal

waste streams, which is illegal in some areas.

For information on Ni-MH battery recycling in your area, call (toll

free) 1-800-8-BATTERY (1-800-822-8837).

Kenwood’s involvement in this program is part of our commitment

to preserve our environment and conserve our natural resources.

The RBRC Recycle seal found on Kenwood

lithium-ion (Li-ion) battery packs indicates

Kenwood’s voluntary participation in an industry

program to collect and recycle Li-ion batteries

after their operating life has expired. The RBRC

program is an alternative to disposing Li-ion

batteries with your regular refuse or in municipal

waste streams, which is illegal in some areas.

For information on Li-ion battery recycling in your area, call (toll

free) 1-800-8-BATTERY (1-800-822-8837).

Kenwood’s involvement in this program is part of our commitment

to preserve our environment and conserve our natural resources.

iii

Precautions

• Do not charge the transceiver and battery pack when they are wet.

• Ensure that there are no metallic items located between the

transceiver and the battery pack.

• Do not use options not specified by Kenwood.

• If the die-cast chassis or other transceiver part is damaged, do not

touch the damaged parts.

• If a headset or headphone is connected to the transceiver, reduce

the transceiver volume. Pay attention to the volume level when

turning the squelch off.

• Do not place the microphone cable around your neck while near

machinery that may catch the cable.

• Do not place the transceiver on unstable surfaces.

• Ensure that the end of the antenna does not touch your eyes.

• When the transceiver is used for transmission for many hours, the

radiator and chassis will become hot. Do not touch these locations

when replacing the battery pack.

• Do not immerse the transceiver in water.

• When water gets into the microphone opening or the speaker

grill, the voice level may become incoherent or distorted. Lightly

shake the transceiver to remove the water from the speaker and/or

microphone before operating the transceiver.

• Always switch the transceiver power off before installing optional

accessories.

Turn the transceiver power off in the following locations:

• Near explosives or blasting sites.

• In aircrafts. (Any use of the transceiver must follow the

instructions and regulations provided by the airline crew.)

• Where restrictions or warnings are posted regarding the use of

radio devices, including but not limited to medical facilities.

• Near persons wearing pacemakers.

Turn the transceiver power off in the following locations,

unless the model is specifically qualified for such use

(Intrinsically Safe such as approved by Factory Mutual, CSA):

• In explosive atmospheres (inflammable gas, dust particles,

metallic powders, grain powders, etc.).

• While taking on fuel or while parked at gasoline service stations.

• Do not disassemble or modify the transceiver for any reason.

• Do not place the transceiver on or near airbag equipment while

the vehicle is running. When the airbag inflates, the transceiver

may be ejected and strike the driver or passengers.

• Do not transmit while touching the antenna terminal or if

any metallic parts are exposed from the antenna covering.

Transmitting at such a time may result in a high-frequency burn.

• If an abnormal odor or smoke is detected coming from the

transceiver, switch the transceiver power off immediately,

remove the battery pack from the transceiver, and contact your

Kenwood dealer.

• Use of the transceiver while you are driving may be against

traffic laws. Please check and observe the vehicle regulations

in your area.

• Do not expose the transceiver to extremely hot or cold

conditions.

• Do not carry the battery pack (or battery case) with metal

objects, as they may short the battery terminals.

CONTENTS

UNPACKING AND CHECKING EQUIPMENT ..............................1

Supplied AcceSSorieS ...............................................................1

PREPARATION ............................................................................2

BAttery pAck precAutionS .......................................................2

inStAlling/ removing the (optionAl) BAttery pAck....................7

inStAlling the (optionAl) AntennA ............................................8

inStAlling the Belt clip............................................................8

inStAlling the cAp over the univerSAl connector ...................9

inStAlling the (optionAl) SpeAker/ microphone or heAdSet ......9

GETTING ACQUAINTED ...........................................................10

diSplAy (k2/k3/k5/k6/k7 modelS only) ................................13

PROGRAMMABLE FUNCTIONS................................................15

BASIC OPERATIONS .................................................................18

Switching power on/ oFF ....................................................18

AdjuSting the volume.............................................................19

Selecting AZone And chAnnel................................................19

trAnSmitting...........................................................................20

receiving................................................................................22

SCAN...........................................................................................24

temporAry chAnnel lockout ..................................................24

priority ScAn.........................................................................25

ScAn revert ..........................................................................25

ScAn progrAmming (k2/k3/k5/k6/k7 modelS only)...............26

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION ......28

SelcAll (Selective cAlling)....................................................28

StAtuS meSSAge (k2/k3/k5/k6/k7 modelS only)...................29

Short meSSAgeS.....................................................................31

long meSSAgeS ......................................................................31

gpS report ..........................................................................31

DTMF (DUAL TONE MULTI FREQUENCY) CALLS..................32

mAking AdtmF cAll..............................................................32

AutodiAl (k2/k3/k5/k6/k7 modelS only) ..............................33

Stun code..............................................................................33

TRUNKING CALLS .....................................................................34

mAking Atelephone cAll........................................................34

receiving Atelephone cAll ....................................................35

mAking AStAtuS cAll .............................................................35

EMERGENCY CALLS.................................................................36

SCRAMBLER (FM)/ ENCRYPTION (P25) ..................................37

Secure (encrypted) trAnSmiSSion ..........................................37

Selecting the ScrAmBler code...............................................37

Selecting the encryption key ................................................38

deleting the encryption key

(k2/k3/k5/k6/k7 modelS only)

...38

pASSword protection (k2/k3/k5/k6/k7 modelS only)..........38

SIGNALING.................................................................................39

Quiet tAlk (Qt)/ digitAl Quiet tAlk (dQt) ............................39

optionAl SignAling .................................................................40

VOICE OPERATED TRANSMISSION (VOX) .............................41

voX gAin level .....................................................................41

voX operAtion ......................................................................42

CLOCK (K2/K3/K5/K6/k7 MODELS ONLY)................................43

clock AdjuStment ..................................................................43

ADVANCED OPERATIONS........................................................44

BACKGROUND OPERATIONS ..................................................51

time-out timer (tot).............................................................51

BAttery SAver........................................................................51

low BAttery wArning ............................................................52

SignAl Strength indicAtor (k2/k3/k5/k6/k7 modelS only)...52

compAnder .............................................................................53

BuSy chAnnel lockout (Bcl).................................................53

out oF rAnge.........................................................................53

Site trunking .........................................................................54

control chAnnel hunt...........................................................54

voice AnnunciAtion.................................................................54

ptt id..................................................................................54

VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT..............55

voice recorder (k2/k3/k5/k6/k7 modelS only)...................55

voice guide............................................................................56

UNPACKING AND CHECKING EQUIPMENT

Note: The following unpacking instructions are for use by your

Kenwood dealer, an authorized Kenwood service facility, or the

factory.

Carefully unpack the transceiver. We recommend that you

identify the items listed in the following table before discarding

the packing material. If any items are missing or have

been damaged during shipment, file a claim with the carrier

immediately.

Supplied AcceSSorieS

Item Part Number Quantity

Belt clip

• Screws for belt clip

J29-0730-XX 1

N30-3008-XX 2

Universal connector cap

• Dressing screw (preassembled)

• Rubber seal (preassembled)

B09-0682-XX 1

N08-0531-XX 1

G11-4340-XX 1

Quick reference card B59-2393-XX 1

Instruction manual B62-2024-XX 1

Belt clip + screws Universal

connector cap

PREPARATION

BAttery pAck precAutionS

Do not use battery packs or battery chargers not recommended

by Kenwood.

◆Do not recharge the battery pack if it is already fully charged.

Doing so may cause the life of the battery pack to shorten or the

battery pack may be damaged.

◆After charging the battery pack, disconnect it from the charger.

If the charger power is reset (turned ON after being turned

OFF), recharging will start again and the battery pack will

become overcharged.

◆Do not use the transceiver while charging the battery pack.

We recommend you switch the transceiver power OFF while

charging is taking place.

◆Do not charge the battery pack when the battery pack or

transceiver is wet, to avoid the risk of fire or damage. Wipe

the water from the battery pack or transceiver using a dry cloth

before charging.

◆Do not short the battery terminals or dispose of the battery by

fire.

◆Never attempt to remove the casing from the battery pack.

■Charging the Battery Pack

For charging procedures, refer to the battery charger

Instruction Manual.

Andere Handbücher für TK-5210

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenwood Transceiver Handbücher

Kenwood

Kenwood TM-741E Bedienungsanleitung

Kenwood

Kenwood TK-2118 Bedienungsanleitung

Kenwood

Kenwood TK-880 series Bedienungsanleitung

Kenwood

Kenwood TS-450S Bedienungsanleitung

Kenwood

Kenwood TK-860G series Betriebsanleitung

Kenwood

Kenwood TH-K4AT Bedienungsanleitung

Kenwood

Kenwood TK-8102 Bedienungsanleitung

Kenwood

Kenwood TM-D710A Bedienungsanleitung

Kenwood

Kenwood TS-940S Bedienungsanleitung

Kenwood

Kenwood TM-251A Bedienungsanleitung

Kenwood

Kenwood TK-860G series Bedienungsanleitung

Kenwood

Kenwood TK-2360 Bedienungsanleitung

Kenwood

Kenwood TK-2140 Bedienungsanleitung

Kenwood

Kenwood NX-5300 F2 Bedienungsanleitung

Kenwood

Kenwood TK-7360 Bedienungsanleitung

Kenwood

Kenwood TK-3312 Bedienungsanleitung

Kenwood

Kenwood TM-281E Bedienungsanleitung

Kenwood

Kenwood TK-7180 Einrichtungshandbuch

Kenwood

Kenwood TK-2317 Bedienungsanleitung

Kenwood

Kenwood ProTalk tk-3501 Bedienungsanleitung

Kenwood

Kenwood TS-820 Bedienungsanleitung

Kenwood

Kenwood TS-700S Bedienungsanleitung

Kenwood

Kenwood TK-3212 Bedienungsanleitung

Kenwood

Kenwood TS-180S Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung

Standard Horizon

Standard Horizon HX320E Bedienungsanleitung

Em-Trak

Em-Trak A100 Bedienungsanleitung

HPE

HPE Aruba QSFP28 Bedienungsanleitung