Kenwood TK-630 series Bedienungsanleitung

CONTENTS

INTRODUCTION

......................................

2. SAFETY

............................................

UNPACKING AND CHECKING EQUIPMENT

..................

4. OPERATION

4-1. CONTROLS AND FUNCTIONS

.......................

4-2. RECEIVE

......................................

4-3. TRANSMIT

....................................

4-4. SCAN OPERATION

..............................

4-5.

ADDING CHANNELS AND GROUPS TO THE SCAN LIST

...

4-6.

.........................................

DELETING CHANNELS AND GROUPS FROM THE SCAN LIST

4-7. REPEATER TALK-AROUND (TA)

....................

4-8.

HORN ALERT FUNCTION (HA)

......................

4-9. PUBLIC ADDRESS FUNCTION (PA)

..................

4-1

EXTERNAL SPEAKER FUNCTION

(SP)

................

4-1

ALPHANUMERIC FUNCTION (AN)

....................

4-12. INTERCOM FUNCTION

(IC)

........................

4-13. HOME CHANNEL (HC)

............................

4-14. OPERATOR SELECTABLE SQUELCH CONTROL (SQL)

....

INTRODUCTION

Your

two-way radio has been designed

provide

dependable communications,

and

simple and easy to operate.

All KENWOOD

radios incorporate the latest

advanced technology,

providing

communicationsthat can

counted

keep vehicles and personnel

operating at peak efficiency.

This

instruction manual covers the following radios.

TK-630H

LOW BAND FM TRANSCEIVER

TK-730 TK-730H VHF

TRANSCEIVER

TK-830 TK-830H

UHF

TRANSCEIVER

When

there

are differences

operation, separate instructions

will

be given

for

each model.

IMPORTANT

GOVERNMENT LAW PROHIBITS THE OPERATION OF UNLICENSED

RADIO TRANSMITTERS WITHIN THE TERRITORIES UNDER

GOVERNMENT CONTROL. ILLEGAL OPERATION

PUNISHABLE BY FINE

rSR IMPRISONMENT

BOTH. REFER SERVICE TO A QUALIFIED

LICENSED

CERTIFIED TECHNICIAN ONLY.

OPERATION

4-1.

CONTROLS AND FUNCTIONS

BASICFRONTPANEL

KCH-3

Microphoneinput

receptacle

POWER switch

MON(MONITOR)switch

Pressto turn the power ON and OFF.

the MONswitch is pressedonce while the radio iswaiting for reception,the

codedsquelch iscanceled. If the switch is pressedfor two seconds,the

noisesquelch isdisabled and speaker audio unmutes.

Can be programmedfor and operate any of the following: the PA (public

address),HA (hornalert),TA (talk-around),AN (alphanumeric),IC (intercom),

SP (externalspeaker),D/A (deleteladd),OPT (option),or AUX (auxiliary)

function programmed by the FPU (KPG-7D).

(FPU:P.C. FieldProgrammingUnit)

Pressingthis switch toggles the system scan function.

(Seesection

4-5

and

4-6

for

additional operations.)

If you holddown the SCN key and pressthis key,the selected channel can

beadded to or deleted from the scan list(Non-priority channels).

Front mountedfor best sound quality.

Rotary control knobfor channel selection.

Audio level control knob:for receive,PA, IC volume.

Displaysoperating channel number.

Alphanumeric datafor each channel is displayed, if applicable.

@OPT

(OPTION)switch

SCN (SCAN)switch

D/A (DELETE/ADD)switch

INTERNALSPEAKER

CH (CHANNEL)selector

VOL (VOLUME)control

SEGMENT display

(CHANNELADD) indicator

SCN (SCAN)indicator

(DOT)indicator

PI(PRIORITY1) indicator

P2 (PRIORITY

indicator

TA (TALKAROUND) indicator

SP (EXTERNALSPEAKER)indicator

OPT (OPTION)indicator

MON(MONITOR)indicator

CALL indicator(Anoptional SIGNALING unit is required:2-tone or DTMF

the selectedchannel is inthe scan list,the indicator lightsat that channel.

Indicateswhen scan mode isenabled.

Lightswhen the programmed AUX switch is pressed.

Lightswhen a PRIORITY

channel isshown on the display.

Lightswhen a PRIORITY 2 channel isshown on the display.

Lightswhen the transceiver is intalk around mode (TA switch).

Lightswhen the receivedsignal isoutputtothe PA speaker.

Lights when the programmed OPT switch is pressed.

Lights when the MONswitch is pressed andthe codedsquelch is disabled.

decode

)

Lightswhen called individually.

Indicateswhen channel is in use.

Indicateswhen the transmitter is keyed.

BUSY indicator

TX indicator

FULLFEATURED FRONT PANEL

KCH-4

I I

Microphone

input

receptacle

POWER switch

GRP (GROUP)UP switch

Pressto turn the power ON and OFF.

GROUP UP switch for group selection. Holdingthe switch causes the

functionto repeat.

Group down switchfor group selection. Holdingthe switch causes the

function to repeat.

the MONswitch is pressed once while the radio iswaiting for reception,the

coded squelch iscanceled. If the switch is pressed for two seconds,the

noisesquelch is disabled and speaker audio unmutes.

Pressingthis switchtogglesthe system scanfunction.

Can be programmedfor and operate any of thefollowing: PA (public

address),HA (hornalert),TA (talkaround),IC (intercom),AN (alphanumeric),

SP (externalspeaker), D/A (delete/add), OPT (option)or AUX (auxiliary)

function (programmedby the FPU (KPG-7D)).

Rotarycontrol knobfor channel selection.

Audio level control knob:for receive, PA,

volume.

Indicateswhen the transmitter

keyed.

Lightswhen the MONswitch

pressed and the coded squelch isdisabled.

Indicateswhen scan mode

enabled.

GRP (GROUP)DOWN switch

MON(MONITOR)switch

SCN (SCAN)switch

KEY

1-4

switches

CH (CHANNEL)selector

VOL (VOLUME)control

indicator

MON(MONITOR)indicator

SCAN indicator

P1 (PRIORITY

indicator

P2 (PRIORITY2) indicator

SP (EXTERNALSPEAKER) indicator

OPT (OPTION)indicator

TA (TALKAROUND) indicator

AUX (AUXILIARY)indicator

13 SEGMENT display

Lightswhen a PRIORITY

channel isshown on the display.

Lightswhen a PRIORITY 2 channel is shown on the display.

Lightswhen the received signal

output tothe PA speaker.

Lightswhen the programmedOPTION switch is pressed.

Lightswhen the transceiver is intalk around mode(TA switch).

Lights when the programmedAUX switch is pressed.

Displaysoperating group number and channel number (Channeldisplay),or

channel name(12-characterAlphanumeric display) programmedby the FPU

(KPG-7D).

(CHANNELADD) indicator

(GROUP

ADD) indicator

the selected channel is inthe scan list,the indicator lights at that channel

the selected group

in the scan list,the indicator lightsatthat group.

Indicateswhen channel is

use.

decode)

Lightswhen called individually.

BUSY

indicator

CALL indicator (Anoptional SIGNALING unit is required: 2-tone, DTMF

MICROPHONE

PTT(Push-To-Talk)switch

Pressthis switch totransmit, and speak intothe microphone.

PTT

switch

4-2.

RECEIVE

To turn on the radio.

(1)

Press the power switch in the upper left corner of the control unit once.

(2)

When turned on,

all

the indicators light, a confirmation tone sounds for

The display and graphics illuminate to indicate the radio is on.

about a second, and the transceiver checks itself.

To set volume.

(1)

To unsquelch the radio, press the

MON

switch for

seconds. This

(2)

Adjust the volume by using the

VOL

control.

unmutes the speaker.

To change channels.

KCH-3

Turn the CH (channel) selector to your regular operating channel.

Turn the CH (channel) selector to your regular operating channel on th

currently displayed group.

To change groups.

(only

KCH-4)

Select the group

pressing either the

GROUP

or GROUP DOWN

switch. When the group number is changed, the channel display indicates the

revert channel number (channel displayed when the group was last selected).

To enter carrier squelch mode.

you wish to monitor (carrier squelch) a channel, press the MON switch.

You may also enter the monitor mode by taking the microphone off hook.

This function can be turned on or off by the

F.P.U.

KCH-4

4-3.

TRANSMIT

First, lift the microphone from its hook and listen for

few seconds to make

certain the channel

not being used.

Normal On Hook Scan mode:

If scanning, the scanning stops temporarily, and the off-hook revert channel

displayed.

scanning, pressing the PTT switch will stop the radio on the off-hook revert

channel and begin transmission immediately. See section

4-4.

SCAN

RAT1

Off Hook Scan mode:

Now,

hold the microphone about one and one-half inches from your lips, press

the PTT (Push-To-Talk) switch, and speak in your normal speaking voice. The

TX display

will

light during transmission. When you are through speaking,

release the PTT switch,

and

you

are automatically back in the receive mode.

When the conversation is finished, place the microphone back on its hook.

Andere Handbücher für TK-630 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenwood Transceiver Handbücher

Kenwood

Kenwood TR-7950 Bedienungsanleitung

Kenwood

Kenwood TH-22A Bedienungsanleitung

Kenwood

Kenwood TM-241A Bedienungsanleitung

Kenwood

Kenwood NX-5700 Bedienungsanleitung

Kenwood

Kenwood TS-430S Bedienungsanleitung

Kenwood

Kenwood TK-863G Bedienungsanleitung

Kenwood

Kenwood TK-3207 Bedienungsanleitung

Kenwood

Kenwood TS-930S Bedienungsanleitung

Kenwood

Kenwood ProTalk DIGITAL NX-P1200NV Bedienungsanleitung

Kenwood

Kenwood TK-931A(D) Bedienungsanleitung

Kenwood

Kenwood NEXEDGE NX-210 Bedienungsanleitung

Kenwood

Kenwood NEXEDGE NX-240 Bedienungsanleitung

Kenwood

Kenwood TK-7180-K Bedienungsanleitung

Kenwood

Kenwood TK-7360 Bedienungsanleitung

Kenwood

Kenwood TM-621A Bedienungsanleitung

Kenwood

Kenwood TK-372G Bedienungsanleitung

Kenwood

Kenwood TK-8180 Betriebsanleitung

Kenwood

Kenwood TH-25A Series Bedienungsanleitung

Kenwood

Kenwood NX-3400 Bedienungsanleitung

Kenwood

Kenwood TS-140S Bedienungsanleitung

Kenwood

Kenwood TR-9130 Bedienungsanleitung

Kenwood

Kenwood TK-3170 Bedienungsanleitung

Kenwood

Kenwood TK-7182 Bedienungsanleitung

Kenwood

Kenwood TK-3107 Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung

Standard Horizon

Standard Horizon HX320E Bedienungsanleitung

Em-Trak

Em-Trak A100 Bedienungsanleitung

HPE

HPE Aruba QSFP28 Bedienungsanleitung