Key Digital KD-CAT5XHDMI Bedienungsanleitung
521 East 3rd Street, Mount Vernon, NY 10553
Phone :: 914.667.9700 Fax :: 914.668.8666
Web :: www.keydigital.com
Rev 0 – July 2007
The KD-CAT5XHDMI is a CAT5 to HDMI extender receiver capable of resolutions up to 1080P
and can be used with or without the supplied power adapter. This device is intended for use
with Key Digital’s KD-HDMIXCAT5 (transmitter) or KD-CAT5XCAT5 (CAT5 extender).
Operating Manual
CAT5 HDMI Extender
Key Digital
®
, led by digital video pioneer Mike Tsinberg,
develops and manufactures high quality, cutting-edge
technology solutions for virtually all applications where
high quality video imaging is important. Key Digital
®
is at the forefront of the video industry for Home
Theater Retailers, Custom Installers, System Integrators,
Broadcasters, Manufacturers, and Consumers. We
provide
total video system solutions because we know
and help drive the technology, the industry, the business,
and all the latest up-and-coming standards. But most
of all, we know exactly what you need for your unique
application - the right solution.
KD-CAT5XHDMI
KD-CAT5XHDMI_Manual.indd 2-3 7/17/07 3:59:51 PM
Page 4
Page 1
HDMI
HDMI
KD-HDMIXCAT5
CAT5/6
CAT5/6
Plasma
Cable Box
KD-CAT5XHDMI
Quick Set Up Guide
HDMI Output
Connect the CAT5 input
source cables to the correct
input ports (‘Data’ and ‘Control’)
on the KD-CAT5XHDMI.
Then, connect power.
Table of Contents
Installation Instructions.............................................3
Mounting the KD-CAT5XHDMI unit....................................4
DVI Applications for the KD-CAT5XHDMI ...............................5
Troubleshooting ..................................................5
Technical Specifications............................................6
Important Product Warnings ........................................7
Safety Instructions ................................................7
How to Contact Key Digital
®
.........................................8
Warranty .......................................................9
© 2007 Key Digital, Inc. All rights reserved.
Finally, connect the HDMI output
of the KD-CAT5XHDMI to the
receiving device.
CAT5 Input
Please read all instructions to insure safe operation of the product.
KD-CAT5XHDMI_Manual.indd 4-1 7/17/07 3:59:56 PM
Page 2
Page 3
Installation Instructions
The KD-CAT5XHDMI can receive power from either the CAT5 connection or via the
supplied power adapter. When using the CAT5 cable to deliver power to the unit,
performance is subject to the following factors:
Ability of the CAT5 cable to deliver the required power over distance
Quality of the CAT5 cable.
We recommend the use on non-shielded CAT5 cable for best performance.
1. Find a safe and convenient location for the KD-CAT5XHDMI unit.
Before permanently securing the unit or final installation of cabling
behind walls or ceilings, test for proper operation of the unit and the
cables in your system.
2. Connections
Plug in the CAT5 source cables (from either the KD-HDMIXCAT5 or KD-
CAT5XCAT5) to their corresponding ‘Data’ and ‘Control’ input ports of the KD-
CAT5XHDMI. If you are not using the supplied power adapter, the “Power” LED
should illuminate upon plugging in the ‘Control’ input cable if your HDMI source
and the KD-HDMIXCAT5 or KD-CAT5XCAT5 are powered on.
If the power LED does not light upon plugging in the CAT5 cable to the ‘Control’
port, make sure you have not crossed the ‘Control’ port cable with the ‘Data’ port
cable.
Plug in the HDMI cable to the “Output” port on the KD-CAT5XHDMI. At this point,
if both your source (KD-HDMIXCAT5, KD-CAT5XCAT5) and destination devices are
powered on, you should see the green “Power” LED and the blue “HPD” LED lit.
3. Power
In order to insure the best possible performance from the KD-CAT5XHDMI, we
recommend using only the original Key Digital power supply.
If you are using the supplied power adapter, plug it into the power input jack on
the side of the unit. You should see the “Power” LED illuminate. (see Fig. 1)
4. LEDs
When a stable signal is established between your source and destination, the
red “Equalizer Active” LED will light. If this red LED indicator is blinking or not
illuminated, try shortening HDMI or CAT5 cable lengths or lowering the resolution
of the video signal.
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
Power Jack
Power Indicator
Stable input video
signal present
Valid Source/Sync
DVD/TV connection
indicator
KD-CAT5XHDMI
CAUTION: No other power supply adapter can be used with this unit! Using
a power supply other than the one provided by Key Digital
®
with the unit
VOIDS THE ENTIRE PRODUCT WARRANTY, may cause damage to the unit
and associated equipment, and is a potential safety hazard.
KD-CAT5XHDMI_Manual.indd 2-3 7/17/07 3:59:59 PM
Page 4
Page 5
Mounting the KD-CAT5XHDMI unit
The KD-CAT5XHDMI is shipped with a convenient mounting clip as an installation option.
Once you have verified operation of the unit with your cables, secure the mounting clip
to a convenient location. Carefully insert the KD-CAT5XHDMI into the mounting clip
provided.
An optional cable clip (included) enables a method for securing HDMI cables to the
mounting bracket of the KD-CAT5XHDMI.
Troubleshooting
Most issues with the KD-CAT5XHDMI setup will involve resolution and distance
performance. If you experience problems (no image, video artifacts, picture dropout,
noise) here are a few things to try.
Use the shortest possible HDMI and CAT5 cables between devices.
Lower the output resolution of the image source.
Use the provided power supply for the KD-CAT5XHDMI instead of relying on the
voltage in the HDMI cable to power the unit.
Use Key Digital HDMI cables.
Other possible problems can result from custom made CAT5 cables. CAT5 cables must
be terminated in accordance with TIA/EIA-568-A or TIA/EIA-568-B pin-pair assignments.
1.
2.
3.
4.
DVI applications for the KD-CAT5XHDMI
The KD-CAT5XHDMI can also be used to extend DVI-D video cable runs. For these
applications, use DVI to HDMI (Key Digital model number KD-MFHDMI or KD-FMHDMI)
adapters.
KD-FMHDMI KD-MFHDMI
Optional cable clips
KD-CAT5XHDMI_Manual.indd 4-5 7/17/07 4:00:03 PM
Page 6
Page 7
Technical Specifications
Connectors:
Two CAT5 input connectors labeled “Data” and “Control”
Standard RJ45 Jack using TIA/EIA-568-A or TIA/EIA-568-B pin/pair assignments
One HDMI output connector labeled “Output”
Power:
External AC-DC power supply included (5 Volt DC @ 1 Amp, 110-240 VAC, 50-60 Hz)
Mechanical:
No Fan Noise
Weight < 1Lb
Molded black ABS Enclosure
Molded black ABS cable clip (1)
Molded black ABS mounting clip (1)
Resolutions Supported:
All resolution up to 1080p/60Hz
Dimensions:
HxWxL = 25 mm x 50 mm x 84 mm
HxWxL = 1 in x 2 in x 3.25 in
›
➔
›
›
›
›
›
›
›
›
›
›
Read and follow all instructions.
Heed all warnings.
Do not use this device near water.
Clean only with dry cloth.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
Refer all servicing to qualified service personnel. Servicing is required when the
device has been damaged in any way including:
Damage to the power supply or power plug
Liquid spills on the device
Objects fallen into the device
Exposure to rain or moisture
1.
2.
3.
4.
5.
6.
7.
➔
➔
➔
➔
Connect CAT5 cables before providing power to the unit.
Test for proper operation before securing unit behind walls or
in hard to access spaces.
If installing the KD-CAT5XHDMI into wall or mounting bracket into sheet-rock,
provide proper screw support with bolts or sheet-rock anchors.
1.
2.
3.
Important Product Warnings:
Safety Instructions.
Please be sure to follow these instructions for safe
operation of your unit.
KD-CAT5XHDMI
KD-CAT5XHDMI_Manual.indd 6-7 7/17/07 4:00:06 PM
Page 8
Page 9
Warranty
All Key Digital
®
products are built to high manufacturing standards and should provide
years of trouble-free operation. They are backed by a limited two-year parts and labor
warranty.
How to Contact Key Digital®
Repairs and Warranty Service
To obtain a Returned Materials Authorization (RMA) number, please contact:
Phone: 1-914-667-9700
E-mail: rma@keydigital.com
Technical Support
For technical questions about using our products, please contact us at either:
Phone: 1-914-667-9700
E-mail: tech@keydigital.com
Customer Support
For customer support questions about using our products, please contact us at
either:
Phone: 1-914-667-9700
E-mail: [email protected]
Feedback
Please e-mail any comments/questions about the manual to:
E-mail: [email protected]
›
➔
➔
›
➔
➔
›
➔
➔
›
➔
KD-CAT5XHDMI_Manual.indd 8-9 7/17/07 4:00:07 PM
Andere Handbücher für KD-CAT5XHDMI
1
Inhaltsverzeichnis
Andere Key Digital Extender Handbücher
Key Digital
Key Digital FatCAT KD-CATHD Tx Bedienungsanleitung
Key Digital
Key Digital KD-CAT5XHDMI Bedienungsanleitung
Key Digital
Key Digital FATCAT Series Bedienungsanleitung
Key Digital
Key Digital KD-EX18G Bedienungsanleitung
Key Digital
Key Digital Smart Baluns KD-BBRX Bedienungsanleitung
Key Digital
Key Digital KD-HDFIX22 Bedienungsanleitung
Key Digital
Key Digital KD-CATHD300Lite Bedienungsanleitung
Key Digital
Key Digital KD-HDMIWPRX Bedienungsanleitung
Key Digital
Key Digital KD-IP120TX Bedienungsanleitung
Key Digital
Key Digital KD-HDMIXCAT5 Bedienungsanleitung
Key Digital
Key Digital Phantom KD-HD1X1ProK Bedienungsanleitung
Key Digital
Key Digital KD-FIX418 Bedienungsanleitung
Key Digital
Key Digital KD-CATHD500Pro Bedienungsanleitung
Key Digital
Key Digital KD-HDB150 Bedienungsanleitung
Key Digital
Key Digital KD-X444L Bedienungsanleitung
Key Digital
Key Digital KD-X422WP Bedienungsanleitung
Key Digital
Key Digital KD-X411ProK Bedienungsanleitung
Key Digital
Key Digital KD-CAT5XCAT5 Bedienungsanleitung
Key Digital
Key Digital KD-X422POA Bedienungsanleitung
Key Digital
Key Digital KD-XUSB2 Bedienungsanleitung
