Keysight Technologies 16380V Bedienungsanleitung

Operation and

Service Manual

Keysight 16380V Option 001

10 μF Capacitance Standard

Upgrade Kit

Notices

2001 - 2020

No part of this manual may be repro-

duced in any form or by any means

(including electronic storage and

retrieval or translation into a foreign

language) without prior agreement

and written consent from Keysight

Technologies, Inc. as governed by

United States and international

Trademark Acknowledgments

Manual Part Number

16380-90111

Edition

Edition 4, February 27, 2020

Printed in Malaysia

Published by:

Keysight Technologies International

Japan G.K,

1-3-3 Higashikawasaki-cho

Chuo-ku

Kobe-shi, Hyogo, Japan

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIM-

ITED TO THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PUR-

POSE. KEYSIGHT SHALL NOT BE

LIABLE FOR ERRORS OR FOR INCI-

DENTAL OR CONSEQUENTIAL DAM-

AGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFOR-

MANCE OF THIS DOCUMENT OR

ANY INFORMATION CONTAINED

HEREIN. SHOULD KEYSIGHT AND

THE USER HAVE A SEPARATE WRIT-

TEN AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL

IN THIS DOCUMENT THAT CON-

FLICT WITH THESE TERMS, THE

WARRANTY TERMS IN THE SEPA-

RATE AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are fur-

nished under a license and may be

used or copied only in accordance

with the terms of such license.

Declaration of Conformity

Declarations of Conformity for this

product and for other Keysight prod-

ucts may be downloaded from the

Web. Go to http://www.key-

sight.com/go/conformity. You can

then search by product number to

find the latest Declaration of Confor-

mity.

U.S. Government Rights

The Software is “commercial com-

puter software,” as defined by Fed-

eral Acquisition Regulation (“FAR”)

2.101. Pursuant to FAR 12.212 and

27.405-3 and Department of Defense

FAR Supplement (“DFARS”)

227.7202, the U.S. government

acquires commercial computer soft-

ware under the same terms by which

the software is customarily provided

to the public. Accordingly, Keysight

provides the Software to U.S. gov-

ernment customers under its stan-

dard commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of which

can be found at http://www.key-

sight.com/find/sweulaThe license set

forth in the EULA represents the

exclusive authority by which the U.S.

government may use, modify, dis-

tribute, or disclose the Software. The

EULA and the license set forth

therein, does not require or permit,

among other things, that Keysight:

(1) Furnish technical information

related to commercial computer soft-

ware or commercial computer soft-

ware documentation that is not

customarily provided to the public; or

(2) Relinquish to, or otherwise pro-

vide, the government rights in

excess of these rights customarily

provided to the public to use, modify,

reproduce, release, perform, display,

or disclose commercial computer

software or commercial computer

software documentation. No addi-

tional government requirements

beyond those set forth in the EULA

shall apply, except to the extent that

those terms, rights, or licenses are

explicitly required from all providers

of commercial computer software

pursuant to the FAR and the DFARS

and are set forth specifically in writ-

ing elsewhere in the EULA. Keysight

shall be under no obligation to

update, revise or otherwise modify

the Software. With respect to any

technical data as defined by FAR

2.101, pursuant to FAR 12.211 and

27.404.2 and DFARS 227.7102, the

U.S. government acquires no greater

than Limited Rights as defined in FAR

27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data.

Safety Notices

A CAUTION notice denotes a haz-

ard. It calls attention to an oper-

ating procedure, practice, or the

like that, if not correctly per-

formed or adhered to, could

result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION

notice until the indicated condi-

tions are fully understood and

met.

A WARNING notice denotes a haz-

ard. It calls attention to an oper-

ating procedure, practice, or the

like that, if not correctly per-

formed or adhered to, could

result in personal injury or death.

Do not proceed beyond a WARN-

ING notice until the indicated

conditions are fully understood

and met.

Keysight 6380V Option 001 10 μF Capacitance Standard Upgrade Kit 3

Contents

1. General Information

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

The Option 001 Upgrade Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Contents of the 16380V Option 001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

2. Specifications and Supplemental Performance Characteristics

Specifications for 16388A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Supplemental Performance Characteristics for 16388A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Capacitance Temperature Coefficient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Capacitance Stability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Maximum Allowable Voltage/Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Residual Capacitance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Storage Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

3. Service

Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Recommended Calibration Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Repair. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

4. Modification of 16380C’s Case

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Modification Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

4 Keysight 6380V Option 001 10 μF Capacitance Standard Upgrade Kit

Contents

Keysight 6380V Option 001 10 μF Capacitance Standard Upgrade Kit 5

General Information

Introduction

1 General Information

Introduction

This chapter lists the contents of the kit.

The Option 001 Upgrade Kit

The purpose of the kit is to add one precision capacitor 10 μF (16388A) to the

16380C which consists of three precision capacitors 0.01 μF (16385A), 0.1 μF

(16386A), and 1 μF (16387A).

Contents of the 16380V Option 001

See Table 1-1 for the kit contents. If anything is missing, contact the nearest

Keysight Technologies office.

Table 1-1 Contents of the 16380V Option 001 Upgrade Kit

Description Keysight PN Qty.

16388A (10 μF) Not Assigned 1

Pad116380-25001 1

Label 7120-0381 1

Calibration Report Not Assigned 1

Upgrade Manual (This Manual) 16380-90111 1

1. For modification of your 16380C’s case. See Chapter 4.

6 Keysight 6380V Option 001 10 μF Capacitance Standard Upgrade Kit

General Information

Introduction

Keysight 6380V Option 001 10 μF Capacitance Standard Upgrade Kit 7

Specifications and Supplemental Performance Characteristics

Specifications for 16388A

2 Specifications and Supplemental Performance

Characteristics

Specifications for 16388A

Operating Conditions

Ambient Temperature: 23±5 %C

Relative Humidity: Less than 70% RH

Dimensions

142(W) × 88(D) × 112(H) mm

Weight

Approximately 1.7 kg

Table 2-1

Model 16388A

Nominal Value1

1. Specified at 1kHz under the following ambient conditions:

Temperature: 23±5⋅C

10 μF

Nominal Accuracy1±0.05%

Dissipation Factor1≤5×10-4

8 Keysight 6380V Option 001 10 μF Capacitance Standard Upgrade Kit

Specifications and Supplemental Performance Characteristics

Supplemental Performance Characteristics for 16388A

Capacitance Temperature Coefficient

–20 to 35 ppm/%C

Capacitance Stability

|50 ppm/year @ 1 kHz, 23±5%C

Maximum Allowable Voltage/Current

40 V peak (ac+dc)/100 mA rms

Residual Capacitance

Figure 2-1

CHL: 4 terminal capacitance

CHG, CLG: Stray capacitance to guard

Storage Conditions

Temperature: –10 %C to +55 %C

Relative Humidity: Less than 85% RH at 40 %C

Table 2-2

16388A

CHG1|50 pF

CLG1|50 pF

1. : See figure below.

Keysight 6380V Option 001 10 μF Capacitance Standard Upgrade Kit 9

Service

Calibration

3Service

Calibration

Keysight Technologies will calibrate the 16380C together with the 16388A

(10 μF). For complete information (price, time required, etc.) on how to have

the 16380C and the 16388A (10 μF) calibrated, contact the nearest Keysight

Technologies Sales and Service Office. When your 16380C and 16388A (10 μF)

requires calibration, all four capacitors should be returned to Keysight

Technologies.

Recommended Calibration Cycle

The 16380C and the 16388A (10 μF) should be calibrated at least once a year.

More frequent calibration may be required if the capacitors are used in very hot

or very cold environments.

Repair

The 16380C and the 16388A (10 μF) contains no replaceable components. If

one of the capacitors becomes damaged, or if its capacitance value is outside

specified Limits, the capacitor must be replaced. For complete information on

service, contact the nearest Keysight Technologies Sales and Service Office.

10 Keysight 6380V Option 001 10 μF Capacitance Standard Upgrade Kit

Service

Repair

Inhaltsverzeichnis

Andere Keysight Technologies Prüfgeräte Handbücher

Keysight Technologies

Keysight Technologies N4891A Bedienungsanleitung

Keysight Technologies

Keysight Technologies N4877A Bedienungsanleitung

Keysight Technologies

Keysight Technologies E5405A-Pro Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N5222-60124 Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies U3020AS22 Handbuch

Keysight Technologies

Keysight Technologies 85032B Handbuch

Keysight Technologies

Keysight Technologies N2142A Bedienungsanleitung

Keysight Technologies

Keysight Technologies 1000A Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N5990A-301 Bedienungsanleitung

Keysight Technologies

Keysight Technologies X Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies M8000 Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies 85041A Service-Handbuch

Keysight Technologies

Keysight Technologies E6640A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3042AM04 Handbuch

Keysight Technologies

Keysight Technologies U3042AE08 Handbuch

Keysight Technologies

Keysight Technologies N4000A SNS Series Service-Handbuch

Keysight Technologies

Keysight Technologies N5224AU-401 Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies 16117B Bedienungsanleitung

Keysight Technologies

Keysight Technologies P9241A Benutzerhandbuch

Keysight Technologies

Keysight Technologies i7090 Betriebsanleitung

Keysight Technologies

Keysight Technologies InfiniiVision 2000 Bedienungsanleitung

Keysight Technologies

Keysight Technologies Infiniium 9000 Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3020AD01 Handbuch

Keysight Technologies

Keysight Technologies InfiniiVision 3000T X Series Handbuch

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung