Keysight Technologies N7015A Bedienungsanleitung

Keysight USB Type-C

Connectivity Solution

(Describes Keysight N7015A / 6A / 7A / 8A

Type-C Test Fixtures)

User Guide

Distributed by:

dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [email protected] ▪ www.datatec.de

2Keysight USB Type-C Connectivity Solution User Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies as governed by United States

and international copyright laws.

Manual Part Number

N7015-97005

Edition

Fifth Edition, October 30, 2017

Available in electronic format only

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS," AND IS

SUBJECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER,

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DISCLAIMS

ALL WARRANTIES, EITHER EXPRESS OR

IMPLIED WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT SHALL

NOT BE LIABLE FOR ERRORS OR FOR

INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE OF

THIS DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD KEYSIGHT

AND THE USER HAVE A SEPARATE WRITTEN

AGREEMENT WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH THESE

TERMS, THE WARRANTY TERMS IN THE

SEPARATE AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

U.S. Government Rights

The Software is "commercial computer soft-

ware," as defined by Federal Acquisition

Regulation ("FAR") 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement ("DFARS")

227.7202, the U.S. government acquires

commercial computer software under the

same terms by which the software is cus-

tomarily provided to the public. Accordingly,

Keysight provides the Software to U.S. gov-

ernment customers under its standard com-

mercial license, which is embodied in its

End User License Agreement (EULA), a copy

of which can be found at http://www.key-

sight.com/find/sweula. The license set

forth in the EULA represents the exclusive

authority by which the U.S. government may

use, modify, distribute, or disclose the Soft-

ware. The EULA and the license set forth

therein, does not require or permit, among

other things, that Keysight: (1) Furnish tech-

nical information related to commercial

computer software or commercial computer

software documentation that is not custom-

arily provided to the public; or (2) Relinquish

to, or otherwise provide, the government

rights in excess of these rights customarily

provided to the public to use, modify, repro-

duce, release, perform, display, or disclose

commercial computer software or commer-

cial computer software documentation. No

additional government requirements beyond

those set forth in the EULA shall apply,

except to the extent that those terms, rights,

or licenses are explicitly required from all

providers of commercial computer software

pursuant to the FAR and the DFARS and are

set forth specifically in writing elsewhere in

the EULA. Keysight shall be under no obliga-

tion to update, revise or otherwise modify

the Software. With respect to any technical

data as defined by FAR 2.101, pursuant to

FAR 12.211 and 27.404.2 and DFARS

227.7102, the U.S. government acquires no

greater than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data. 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any tech-

nical data.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not pro-

ceed beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard.

It calls attention to an operating pro-

cedure, practice, or the like that, if not

correctly performed or adhered to,

could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Keysight USB Type-C Connectivity Solution User Guide 3

Contents

1 Type-C Connectivity Solution Overview

Introduction to the Type-C Test Fixtures 8

Usage Scenarios for the Type-C Test Fixtures 9

How the Type-C Test Fixtures Work Together 10

Type-C Connectivity Test Kits 11

N7015A Type-C High Speed Test Fixture Kit 11

N7018A Type-C Test Controller Kit 12

ZA0200 Type-C Core Connectivity Kit 12

Compatibility with Oscilloscopes 14

For More Information... 15

2 N7015A Type-C High Speed Test Fixture

Components 18

N7015A Channels Identification Rings 19

N7015A Insertion Loss Plot 20

Cleaning the N7015A Test Fixture 21

3 N7018A Type-C Test Controller

Components 24

Supported ALT Modes 27

Features 28

Powering the N7018A and DUT 30

Powering the N7018A 30

Powering the DUT as a Provider or a Consumer 30

Setting up the Wire Harness for the External Power Supply 31

Pre-use Warnings and Connectivity Precautions 33

Cleaning the N7018A Test Controller 34

4 N7016A Type-C Low Speed Test Fixture

Introduction 36

Features 37

4Keysight USB Type-C Connectivity Solution User Guide

Contents

N7016A Block Diagrams 38

Connection Block Diagram 38

VBUS Control Block Diagram 39

SBU Switch Block Diagram 39

CC Control Block Diagram 40

Significance and Values of Rp, Rd, and Ra Termination Resistors in the USB Type-C Connector: 41

Control Setup Block Diagram 42

Powering the N7016A 43

Replacing the N7016A Fuse 45

5 N7017A Type-C Receptacle Adapter

Insertion Loss Plot for N7015A with N7017A 49

6 Recommended Accessories

N2787A 3D Probe Positioner 51

N2823A or N5448B Coaxial Phase Matched Cable Pair 51

InfiniiMax 1130B Series Probe Amplifier 54

E2678B Socketed Head for InfiniiMax Probe 54

Passive Probe 54

7 Sample Setups for Type-C Testing

Testing a USB 3.1 Host (Tx) 56

Testing a DisplayPort (2+2) Source (Tx and AUX Channel Testing) 57

Testing a DisplayPort (4 lanes) Source (Tx and AUX Channel Testing) 58

Testing a Thunderbolt 3 Host (Tx) 59

Testing a USB Power Delivery Consumer over Type-C Interface 60

Testing a USB Power Delivery Provider with N7018A set to Sink Current 61

Testing a USB Power Delivery Provider over Type-C Interface 62

8 Accessing Type-C Signals

Overview 64

Probing the CC1, CC2, and VBUS Signals 65

Probing the SBU1 and SBU2 (Secondary Bus) Signals 67

Probing the SBU1 and SBU2 Signals at the N7015A Test Fixture 67

Probing the SBU1 and SBU2 Signals at the N7016A or N7018A 67

Probing the D+ and D- Signals 70

Keysight USB Type-C Connectivity Solution User Guide 5

9 Installing and Configuring Software Components for Type-C Testing

If you are Using N7018A 72

Installing the N7018A Type-C Test Controller Software 72

Launching the N7018A Software GUI 72

Establishing Connectivity between the N7018A Hardware and Software GUI 74

Setting up the N7018A Emulation Role and ALT Mode and Establishing Connection with DUT 75

Setting up and Establishing a Power Delivery Contract with DUT 78

Configuring LFPS Settings (applicable to USB 3.1 testing only) 82

Viewing the Status of the N7018A Connection with the DUT 85

If you are Using N7016A 87

Installing the N7016A Type-C Low Speed Signal Access and Control Fixture Software 87

Installing the Appropriate Keysight Compliance Application Software 92

10 Schematic Diagrams and Pinouts

N7015A Dimensions 94

N7015A Pinout 95

N7018A Dimensions 98

N7016A Dimensions 99

N7017A Receptacle Adapter Dimensions 100

N7017A Receptacle Adapter Pinout 101

Signal Routing when using the N7017A Receptacle Adapter 102

11 Downloading the S-parameter File

12 Characteristics and Specifications

Environmental Characteristics 105

Specifications 105

13 Safety and Regulatory Information

Instrument Markings 108

Index

6Keysight USB Type-C Connectivity Solution User Guide

Contents

Keysight Type-C Connectivity Solution

User Guide

1Type-C Connectivity Solution

Overview

Introduction to the Type-C Test Fixtures / 8

Usage Scenarios for the Type-C Test Fixtures / 9

How the Type-C Test Fixtures Work Together / 10

Type-C Connectivity Test Kits / 11

Compatibility with Oscilloscopes / 14

For More Information... / 15

This chapter introduces the Keysight Type-C connectivity test fixtures and describes how these function

together to allow you to perform integrated testing for various interfaces supported over Type-C.

The details of each of these test fixtures and the hardware and software setup information are included in

the subsequent chapters.

1 Type-C Connectivity Solution - Overview

8Keysight Type-C Connectivity Solution User Guide

Introduction to the Type-C Test Fixtures

The N7015A, N7016A, N7017A, and N7018A Type-C test fixtures provide a comprehensive and

complete testing solution for automated compliance testing, characterization, validation, and

debugging of your Type-C host/device including various Type-C interfaces such as USB, DisplayPort,

and ThunderboltTM. The following picture highlights the broad role that each of these Type-C test

fixtures play in the Type-C testing scenario.

NOTE

The N7018A is a superset of most of the features of the N7016A and additionally provides

power delivery controller capabilities and integrated testing over Type-C interfaces

through a single connection. This makes the N7018A a full replacement of the N7016A.

Keysight Type-C Connectivity Solution User Guide 9

Type-C Connectivity Solution - Overview 1

Usage Scenarios for the Type-C Test Fixtures

You can use the Type-C test fixtures described in this guide in the following scenarios.

• USB 2.0 Tx and Rx testing

• USB 3.1 Gen 1 (5Gbs) and Gen 2 (10Gbs) Tx and Rx testing

• Thunderbolt 3 over Type-C Tx and Rx testing

• DisplayPort 1.3 over Type-C testing including:

•2+2 mode: Two DisplayPort differential lanes + two simultaneous USB 3.1 differential

lanes

•Four DisplayPort differential lanes

• DisplayPort AUX Channel testing

• USB-Power Delivery over Type-C (Provider and Consumer and ALT Modes Control testing)

Sample setups and specific notes for these scenarios are included in the chapter “Sample Setups for

Type-C Testing" on page 55.

1 Type-C Connectivity Solution - Overview

10 Keysight Type-C Connectivity Solution User Guide

How the Type-C Test Fixtures Work Together

A high level overview of how these Type-C test fixtures work together is provided below. For details,

refer to the individual chapters in this guide dedicated to these fixtures.

The N7015A test fixture connects to a DUT and a compatible oscilloscope to break out four

differential lanes of Type-C high-speed signals from the DUT to the oscilloscope. These high-speed

signals can be monitored and analyzed using the Keysight Infiniium software installed on the

oscilloscope.

For low-speed power and control signals access, the N7015A test fixture connects to the N7018A

test controller or the N7016A test fixture and passes the Vbus, SBU, and CC lines to the N7018A /

N7016A via a USB Type-C (plug style) cable. There are probe points for Vbus, SBU, and CC lines on

the N7018A or N7016A to allow you to probe these low-speed signals at these fixtures.

The USB Type-C cable that connects the N7015A to the N7018A also serves as the connection

mechanism between the N7018A and DUT with the N7015A test fixture in between. Using this cable,

the N7018A establishes a Type-C connection and a standard 5V PD contract with DUT and

advertises the user-selected mode of operation (ALT Mode) and power delivery role to the DUT.

Once the connection is established, the N7018A can negotiate a new PD contract with the DUT on

the selected CC line using the USB PD protocol. This PD contract is as per the settings that you

configured for the N7018A.

When USB PD negotiations are complete, the N7018A enables the appropriate power path and

negotiates and enters the user-selected ALT Mode. It enables, discovers, configures, and

enters/exits the selected Alt Mode with the DUT via a USB PD protocol handshake.

All these configurations and control of the N7018A test controller including connection, power role,

ALT modes, and power delivery contract settings are done using the N7018A software (see page 72).

To provide power to the N7016A / N7018A test fixtures and control and configure these fixtures

using their software, you connect these to an oscilloscope or a host computer via the supplied USB

cable. An external power supply is needed if the N7018A / N7016A is acting as a power delivery

provider to DUT.

If you are using the N7016A, a power delivery controller is also needed. If you are using the N7018A,

then you do not need a power delivery controller as the N7018A acts as a power delivery controller

as well.

Besides signals monitoring and analysis, characterization, and debugging, these test fixtures also

allow you to run various compliance tests. The N7018A / N7016A test fixtures are integrated with a

number of Keysight compliance applications software to allow you to do automated compliance

testing when using these test fixtures.

Andere Handbücher für N7015A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Keysight Technologies Prüfgeräte Handbücher

Keysight Technologies

Keysight Technologies N9330B Bedienungsanleitung

Keysight Technologies

Keysight Technologies N108 A-Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies InfiniiVision M9241A Bedienungsanleitung

Keysight Technologies

Keysight Technologies InfiniiVision 3000 X Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies 8490D Service-Handbuch

Keysight Technologies

Keysight Technologies U3045AM04 Handbuch

Keysight Technologies

Keysight Technologies N4891A Bedienungsanleitung

Keysight Technologies

Keysight Technologies N5990A Bedienungsanleitung

Keysight Technologies

Keysight Technologies InfiniiVision 4000 X Series Handbuch

Keysight Technologies

Keysight Technologies 85051B Handbuch

Keysight Technologies

Keysight Technologies E6640A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3047AE04 Handbuch

Keysight Technologies

Keysight Technologies 85056D Handbuch

Keysight Technologies

Keysight Technologies M8085A Bedienungsanleitung

Keysight Technologies

Keysight Technologies 85052C Handbuch

Keysight Technologies

Keysight Technologies U9361C Bedienungsanleitung

Keysight Technologies

Keysight Technologies U9361G Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3022AH10 Handbuch

Keysight Technologies

Keysight Technologies Infiniium 9000 Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies E5092A Bedienungsanleitung

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies Z5623A Option H01 Bedienungsanleitung

Keysight Technologies

Keysight Technologies ZA0060A Bedienungsanleitung

Keysight Technologies

Keysight Technologies i7090 Betriebsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung