Keysight Technologies 16048G Bedienungsanleitung

Operation and

Service Manual

Keysight 16048G/H Test Leads

Notices

1999 - 2019

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

16048-90050

Edition

Edition 5, August 19, 2019

Printed in Malaysia

Published by:

Keysight Technologies International

Japan G.K,

1-3-3 Higashikawasaki-cho

Chuo-ku

Kobe-shi, Hyogo, Japan

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIM-

ITED TO THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PUR-

POSE. KEYSIGHT SHALL NOT BE

LIABLE FOR ERRORS OR FOR INCI-

DENTAL OR CONSEQUENTIAL DAM-

AGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFOR-

MANCE OF THIS DOCUMENT OR

ANY INFORMATION CONTAINED

HEREIN. SHOULD KEYSIGHT AND

THE USER HAVE A SEPARATE WRIT-

TEN AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL

IN THIS DOCUMENT THAT CON-

FLICT WITH THESE TERMS, THE

WARRANTY TERMS IN THE SEPA-

RATE AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are fur-

nished under a license and may be

used or copied only in accordance

with the terms of such license.

Declaration of Conformity

Declarations of Conformity for this

product and for other Keysight prod-

ucts may be downloaded from the

Web. Go to http://www.key-

sight.com/go/conformity. You can

then search by product number to

find the latest Declaration of Confor-

mity.

U.S. Government Rights

The Software is “commercial com-

puter software,” as defined by Fed-

eral Acquisition Regulation (“FAR”)

2.101. Pursuant to FAR 12.212 and

27.405-3 and Department of Defense

FAR Supplement (“DFARS”)

227.7202, the U.S. government

acquires commercial computer soft-

ware under the same terms by which

the software is customarily provided

to the public. Accordingly, Keysight

provides the Software to U.S. gov-

ernment customers under its stan-

dard commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of which

can be found at http://www.key-

sight.com/find/sweula The license

set forth in the EULA represents the

exclusive authority by which the U.S.

government may use, modify, dis-

tribute, or disclose the Software. The

EULA and the license set forth

therein, does not require or permit,

among other things, that Keysight:

(1) Furnish technical information

related to commercial computer soft-

ware or commercial computer soft-

ware documentation that is not

customarily provided to the public; or

(2) Relinquish to, or otherwise pro-

vide, the government rights in

excess of these rights customarily

provided to the public to use, modify,

reproduce, release, perform, display,

or disclose commercial computer

software or commercial computer

software documentation. No addi-

tional government requirements

beyond those set forth in the EULA

shall apply, except to the extent that

those terms, rights, or licenses are

explicitly required from all providers

of commercial computer software

pursuant to the FAR and the DFARS

and are set forth specifically in writ-

ing elsewhere in the EULA. Keysight

shall be under no obligation to

update, revise or otherwise modify

the Software. With respect to any

technical data as defined by FAR

2.101, pursuant to FAR 12.211 and

27.404.2 and DFARS 227.7102, the

U.S. government acquires no greater

than Limited Rights as defined in FAR

27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data.

Safety Notices

A CAUTION notice denotes a haz-

ard. It calls attention to an oper-

ating procedure, practice, or the

like that, if not correctly per-

formed or adhered to, could

result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION

notice until the indicated condi-

tions are fully understood and

met.

A WARNING notice denotes a haz-

ard. It calls attention to an oper-

ating procedure, practice, or the

like that, if not correctly per-

formed or adhered to, could

result in personal injury or death.

Do not proceed beyond a WARN-

ING notice until the indicated

conditions are fully understood

and met.

Contents

Keysight 16048G/H Test Leads 3

1. Installation Guide

Incoming Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting the 16048G/H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2. Overview

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3. Operation

E4990A Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Adapter Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Performing Fixture Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

4. Specifications

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5. Service

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4 Keysight 16048G/H Test Leads

Contents

Keysight 16048G/H Test Leads 5

Installation Guide

Incoming Inspection

1 Installation Guide

Incoming Inspection

Inspect the shipping container for damage. If the shipping container or

cushioning material is damaged, it should be kept until the contents of the

shipment have been checked for completeness and the 16048G/H has been

checked mechanically and electrically. The contents of the shipment should be

as listed in Table 1-1. If the contents are incomplete or if there is mechanical

damage or defect, notify the nearest Keysight Technologies office. If the

shipping container is damaged, or the cushioning material shows signs of

unusual stress, notify the carrier as well as the Keysight Technologies office.

Keep the shipping materials for the carrier’s inspection.

Table 1-1 Contents

Description Part Number Qty.

Test Lead (16048G or 16048H) - 1

Mounting Plate - 1

BNC Bracket116048-60073 1

Operation and Service Manual Option ABA 1

1. Only furnished with option 001.

6 Keysight 16048G/H Test Leads

Installation Guide

Connecting the 16048G/H

Follow these steps below to connect the 16048G or 16048H to the Impedance

Analyzer.

Step 1. Set the 16048G/H to the test connectors on the front panel of the Impedance

Analyzer by gradually coupling the four BNC connectors and fastening screws

of the fixture with the test connectors and accessory mounting holes of the

instrument until they come to complete contact.

Step 2. Fasten two of the four BNC connectors to the mating test connectors by

gradually turning the BNC connectors' rotation levers until each pair of

connectors are securely connected. Be sure to align the grooves on both sides.

Step 3. Turn clockwise the fixture's two fastening screws together, so that the fixture is

secured to the instrument.

Step 4. Finally, secure the remaining two BNC connectors of the fixture by turning

clockwise their rotation levers.

Figure 1-1 Connecting the fixture to the instrument

Using the connection block securing screws enables the 16048G/H to

connect the GND of the Impedance Analyzer.

Keysight 16048G/H Test Leads 7

Overview

Product Overview

2 Overview

Product Overview

The 16048G/H consists of a direct attachment, 4-terminal pair interface that is

equipped with four BNC (f) connectors. These test leads are used to attach

user-fabricated test fixtures. Cable length of the 16048G is 1 meter,

the 16048H is 2 meter.

Figure 2-1 Product Overview

8 Keysight 16048G/H Test Leads

Overview

Functions

Figure 2-2 shows name of each part of the 16048G/H and Table 2-1 shows

their function.

Figure 2-2 16048G/H Parts

Table 2-1 16048G/H Function

No. NAME FUNCTION

1InstrumentSide

Connection Block

Connect to the instrument’s UNKNOWN terminal.

2 Connection Block

Securing Screw

Secures the connection block to the Impedance

Analyzer.

3 Ground Lead Connect to the chassis or grounded part of the

measurement target.

4 DUT Side Connection

Block

Used to attach BNC Bracket or user-fabricated test

fixtures.

5 Mounting Plate Mounts on the measurement target to stabilize the

cable.

Keysight 16048G/H Test Leads 9

Overview

Functions

Figure 2-3 Cable Assignment

10 Keysight 16048G/H Test Leads

Overview

Functions

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Keysight Technologies Prüfgeräte Handbücher

Keysight Technologies

Keysight Technologies U3022AH10 Handbuch

Keysight Technologies

Keysight Technologies 85055A Handbuch

Keysight Technologies

Keysight Technologies 85052B Handbuch

Keysight Technologies

Keysight Technologies S8780A Bedienungsanleitung

Keysight Technologies

Keysight Technologies E6640A EXM Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies E6640A Bedienungsanleitung

Keysight Technologies

Keysight Technologies N2142A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3042AE08 Handbuch

Keysight Technologies

Keysight Technologies InfiniiVision M9241A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3020AS16 Handbuch

Keysight Technologies

Keysight Technologies B1542A Pulsed IV Package Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3047AE04 Handbuch

Keysight Technologies

Keysight Technologies X Series Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies N4877A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U1452A Bedienungsanleitung

Keysight Technologies

Keysight Technologies Z5623A Option H01 Bedienungsanleitung

Keysight Technologies

Keysight Technologies N4000A SNS Series Service-Handbuch

Keysight Technologies

Keysight Technologies 16190B Bedienungsanleitung

Keysight Technologies

Keysight Technologies InfiniVision 6000L Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3050BH11 Handbuch

Keysight Technologies

Keysight Technologies 85051B Handbuch

Keysight Technologies

Keysight Technologies E5405A-Pro Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies InfiniiVision 6000 X Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N7015A Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung