Keysight Technologies U3042AE12 Handbuch



User’s and

Service Guide

Keysight Technologies

U3042AE12

Multiport Test Set Extension

Notices

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

U3042-90001

Edition

Edition 6, March 2019

Supersedes: March 2019

Printed in:

Printed in USA

Published by:

Keysight Technologies Inc

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.



U.S. Government Rights

The Software is “commercial

computer software,” as defined by

Federal Acquisition Regulation

(“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and

Department of Defense FAR

Supplement (“DFARS”) 227.7202,

the U.S. government acquires

commercial computer software

under the same terms by which the

software is customarily provided to

the public. Accordingly, Keysight

provides the Software to U.S.

government customers under its

standard commercial license, which

is embodied in its End User License

Agreement (EULA), a copy of which

can be found at http://

www.keysight.com/find/sweula. The

license set forth in the EULA

represents the exclusive authority by

which the U.S. government may use,

modify, distribute, or disclose the

Software. The EULA and the license

set forth therein, does not require or

permit, among other things, that

Keysight: (1) Furnish technical

information related to commercial

computer software or commercial

computer software documentation

that is not customarily provided to

the public; or (2) Relinquish to, or

otherwise provide, the government

rights in excess of these rights

customarily provided to the public to

use, modify, reproduce, release,

perform, display, or disclose

commercial computer software or

commercial computer software

documentation. No additional

government requirements beyond

those set forth in the EULA shall

apply, except to the extent that those

terms, rights, or licenses are

explicitly required from all providers

of commercial computer software

pursuant to the FAR and the DFARS

and are set forth specifically in

writing elsewhere in the EULA.

Keysight shall be under no obligation

to update, revise or otherwise modify

the Software. With respect to any

technical data as defined by FAR

2.101, pursuant to FAR 12.211 and

27.404.2 and DFARS 227.7102, the

U.S. government acquires no greater

than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5 (c),

as applicable in any technical data.



Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO THE

MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES, EITHER

EXPRESS OR IMPLIED WITH REGARD

TO THIS MANUAL AND ANY

INFORMATION CONTAINED HEREIN,

INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS DOCUMENT

OR ANY INFORMATION CONTAINED

HEREIN. SHOULD KEYSIGHT AND THE

USER HAVE A SEPARATE WRITTEN

AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN

THIS DOCUMENT THAT CONFLICT

WITH THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT SHALL CONTROL.

Safety Notices

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly

performed or adhered to, could

result in damage to the product or

loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are

fully understood and met.

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly

performed or adhered to, could

result in personal injury or death. Do

not proceed beyond a WARNING

notice until the indicated conditions

are fully understood and met.

Table of Contents

Contents-1

U3042AE12

Introduction 8

Description 9

Measurement Application Note 9

Verifying the Shipment 9

Network Analyzer Requirements 10

Available Options 11

Test Set Option 11

Accessory Options 11

Network Analyzer Interface Kit Options 11

General Specifications 12

Power Requirements 12

Environmental Requirements 13

Equipment Heating and Cooling 13

Required Conditions for Accuracy Enhanced Measurement 13

Dimensions and Space Requirements 13

Maximum Power Levels 14

Typical Reflection Tracking 15

Front and Rear Panel Features 16

Hardware Lock-Link Kit Installation with N5230C or N5232A/B 19

Locking the Test Set to the PNA-L 19

PNA-L RF Interface Cable Connections 22

Hardware Lock-Link Kit Installation with N5222A/B or N5242A/B 24

Locking the Test Set to the PNA or PNA-X 24

PNA and PNA-X RF Interface Cable Connections 27

Test Set I/O Cable Installation 29

Interconnect Cable Verification 29

System Operational Checks 30

Equipment Setup 30

Verify Results 30

Controlling the Test Set with N5222A/B, N5230C, N5232A/B or N5242A/B 34

Typeface Key Conventions 34

Definitions for Specifications 34

Multiport Mode (Option 551) 35

Contents-2

Table of Contents

How to Access Multiport Mode 35

External Test Set Control Feature 36

Trace Measure S-Parameter 37

New Trace Measure S-Parameter 37

Sweep Setup for Multiport and Standalone Modes 39

Sweep Setup for PNA-X N52xxB Models 40

RF Path Configuration with Option 029 41

N-Port Calibration with PNA 42

Interface Control Mode 44

Overview of the Interface Control 44

How to Access Interface Control Mode 45

Using Interface Control Mode 46

SCPI Control Mode 48

Overview of the SCPI Control 48

How to Access the Command Processor 49

SCPI Command Processor Console 50

Address and Data Values 52

Setting the Test Port Paths with Address and Data

Control Lines 54

Internal Voltage Supply Configuration 56

External Voltage Supply Configuration 57

Setting the Control Lines with Address and Data Values 58

Setting the PNA to Standalone Mode 58

Cal Kit Operational Check 60

Equipment Required 60

Verification Limits 61

Cal Kit Operational Check Procedure 62

Preparing the Network Analyzer 62

1-Port calibration and Verification Procedure 63

Verifying Cal Kit Operational Check Failure 68

ECal Confidence Check 68

Service Information 69

Replaceable Parts 69

Electrostatic Discharge Protection 69

Table of Contents

Contents-3

Theory of Operation 75

RF Coupler/Bridges 75

Test Set Control Board 75

RF Switch Components 75

Source Switch Paths 76

Receivers Switch Paths 76

Troubleshooting the Test Set 77

Non-RF Failures 77

RF Switching Failures 80

RF Switching Path Test 80

Equipment Required 80

Equipment Setup 81

Cable Connections 81

82 Source Signal Path Insertion Loss Test

RF Performance Fails 85

Connection Tables and Diagrams 86

Safety Information 89

Introduction 89

Safety Earth Ground 89

Statement of Compliance 89

Before Applying Power 90

Connector Care and Cleaning Precautions 92

Regulatory Information 93

Instrument Markings 93

Battery 94

EMC 94

South Korea Class A EMC Declaration 94

Safety 94

Acoustic Statement (European Machinery Directive)

Declaration of Conformity 94

Keysight Support, Services, and Assistance 95

Service and Support Options 95

Contacting Keysight 95

Shipping Your Product to Keysight for Service or Repair 95

System Block Diagram 72

Contents-4



Table of Contents

U3042AE12

U3042AE12 User's and Service Guide

Introduction

This document describes how to use and service the U3042AE12 Multiport Test Set

Extension.

Figure 1 4-Port PNA-L with U3042AE12

Figure 2 4-Port PNA or PNA-X with U3042AE12

U3042AE12 User's and Service Guide

Description

Verifying the Shipment

To verify the contents shipped with your product, refer to the “Box Content List”

included with the shipment.

Inspect the shipping container. If the container or packing material is damaged, it

should be kept until the contents of the shipment have been checked mechanically

and electrically. If there is physical damage refer to “Contacting Keysight” on page 95.

Keep the damaged shipping materials (if any) for inspection by the carrier and a

Keysight Technologies representative.

Measurement Application Note

Low Loss DUT Measurements

Low loss trace stability is a product of switch repeatability and calibration

technique. Low insertion loss measurements exhibiting 0.1 dB of uncertainty is not

uncommon.

The Keysight U3042AE12 is a 12-Port solid-state test set used for multiport

applications. The test set can be connected to a 4-port PNA, PNA-L, or PNA-X,

providing a 16-port network analyzer solution for full crossbar measurements.

The U3042AE12 has the following key features:

12 test ports (3.5 mm male connectors)

High speed, solid state RF switching

Frequency range of operation: 10 MHz to 26.5 GHz

Keysight PNA compatibility with rear panel test set I/O interface for

operational control. The PNA Option 551 is required and provides N-Port

calibration capabilities.

The U3042AE12 is directly controlled by the network analyzer; no external

personal computer or software is required.

The N5222A/B PNA, N5230A/C and N5232A/B PNA-L and N5242A/B PNA-X

Network Analyzer’s will be referred to as the PNA, PNA-L and PNA-X throughout

this document. Analyzer refers to all series of PNA, PNA-L and PNA-X. The

U3042AE12 will be referred to as the Test Set.

•

Table 1 U3042AE12 Accessories Supplied

Description Part Number Quantity

Short, 3.5 mm (female) 85052-60007 1

User's and Service Guide U3042-90001 1

U3042AE12 User's and Service Guide

Network Analyzer Requirements

Ensure that the network analyzer has the latest version of installed. The following

web site links provide the necessary information needed:

• Network Analyzer - http://www.keysight.com/find/pna

•U3042AE12 Test Set Files - http://na.support.keysight.com/multiport/

testsetsupport.html

•Firmware - http://na.support.keysight.com/pna/firmware/

firmware.html

Table 2

All network analyzers require Option 551 for multiport operation (N-Port error

correction and measurement capability). Table 2 provides a listing of other network

analyzer option requirements. The analyzer’s frequency range must be equal to or

exceed that of the test set so that the measurement system covers the full frequency

range of the test set.

The test set files indicated in Table 2 must be installed into the analyzer’s file

directory: c:\Program Files\Keysight\Network Analyzer\testsets

Network Analyzer Configuration Requirements

4-Port 

Network Analyzer Options Test Set File System Figure

N5222A/B PNA 401, 417 or 419 u3042ae12_pnax_p4.tsx Figure 2

N5230A/C PNA-L 245, 145, 246 or 146 u3042ae12_p4.tsx Figure 1

N5232A/B PNA-L 416 u3042ae12_p4.tsx Figure 1

N5242A/B PNA-X 400 u304xae12_pnax_p4.tsx Figure 2

U3042AE12 User's and Service Guide

Inhaltsverzeichnis

Andere Keysight Technologies Prüfgeräte Handbücher

Keysight Technologies

Keysight Technologies 85033E Fehlerbehebungshandbuch

Keysight Technologies

Keysight Technologies UXR Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N7015A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3042AM04 Handbuch

Keysight Technologies

Keysight Technologies 85059A Service-Handbuch

Keysight Technologies

Keysight Technologies U1818A Service-Handbuch

Keysight Technologies

Keysight Technologies InfiniVision 6000L Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies 8960 Bedienungsanleitung

Keysight Technologies

Keysight Technologies E4982A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3042AM08 Handbuch

Keysight Technologies

Keysight Technologies U3047AM08 Handbuch

Keysight Technologies

Keysight Technologies U3020AD01 Handbuch

Keysight Technologies

Keysight Technologies U3020AS22 Handbuch

Keysight Technologies

Keysight Technologies Z Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies Infiniium V Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies PNA-X N524xB Bedienungsanleitung

Keysight Technologies

Keysight Technologies 85052C Handbuch

Keysight Technologies

Keysight Technologies N5280A Handbuch

Keysight Technologies

Keysight Technologies 16380C Kurzanleitung

Keysight Technologies

Keysight Technologies U3022AM06 Handbuch

Keysight Technologies

Keysight Technologies E7515B UXM 5G Bedienungsanleitung

Keysight Technologies

Keysight Technologies 16047A Bedienungsanleitung

Keysight Technologies

Keysight Technologies InfiniVision 6000L Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies 85052B Handbuch

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung