Keysight U1233A Bedienungsanleitung

Keysight U1231A, U1232A,

and U1233A Handheld

Digital Multimeter

User’s Guide

U1231A/U1232A/U1233A User’s Guide I

II U1231A/U1232A/U1233A User’s Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies as governed by United States

and international copyright laws.

Manual Part Number

U1231-90026

Edition

Edition 12, July 10, 2015

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Warranty

The material contained in this document is

provided “as is,” and is subject to change,

without notice, in future editions. Further,

to the maximum extent permitted by the

applicable law, Keysight disclaims all

warranties, either express or implied, with

regard to this manual and any information

contained herein, including but not limited

to the implied warranties of merchantabil-

ity and fitness for a particular purpose.

Keysight shall not be liable for errors or for

incidental or consequential damages in

connection with the furnishing, use, or

performance of this document or of any

information contained herein. Should Key-

sight and the user have a separate written

agreement with warranty terms covering

the material in this document that conflict

with these terms, the warranty terms in

the separate agreement shall control.

Technology Licenses

The hardware and or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Keysight provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the likes

of that, if not correctly performed

or adhered to, could result in dam-

age to the product or loss of impor-

tant data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the likes of that, if not correctly

performed or adhered to, could

result in personal injury or death.

Do not proceed beyond a WARN-

ING notice until the indicated

conditions are fully understood

and met.

U1231A/U1232A/U1233A User’s Guide III

Safety Symbols

The following symbols on the instrument and in the documentation

indicate precautions which must be taken to maintain safe operation of

the instrument.

DC (Direct current or voltage)

AC (Alternating current or voltage)

Earth (ground) terminal

Caution, risk of danger (refer to this manual for specific Warning

or Caution information)

Equipment protected throughout by double insulation or

reinforced insulation

Category III 600 V overvoltage protection

CAT III

600 V

IV U1231A/U1232A/U1233A User’s Guide

Safety Considerations

Read the information below before using this instrument.

The following general safety precautions must be observed during all

phases of operation, service, and repair of this instrument. Failure to

comply with these precautions or with specific warnings elsewhere in this

manual violates safety standards for design, manufacture, and intended

use of the instrument. Keysight Technologies assumes no liability for the

customer’s failure to comply with these requirements.

CAUTION

•Disconnect circuit power and discharge all high-voltage capacitors

before testing resistance, continuity, diodes, or capacitance.

•Use the proper terminals, function, and range for your

measurements.

•This device is for use at altitudes of up to 2,000 m.

•Never measure voltage when current measurement is selected.

•Always use the specified battery type. The power for the meter is

supplied with four standard AAA 1.5 V batteries. Observe the

correct polarity markings before you insert the batteries to ensure

proper insertion of the batteries in the meter.

•You are advised to use low leakage batteries when changing to new

batteries. Please remember to remove the batteries when the meter

is not in use for a long period of time. Warning on the risk of battery

leakage.

WARNING

• Do not exceed any of the measurement limits defined in the

specifications to avoid instrument damage and the risk of electric

shock.

• Do not use the meter if it is damaged. Before you use the meter,

inspect the case. Look for cracks or missing plastic. Pay

particular attention to the insulation surrounding the connectors.

U1231A/U1232A/U1233A User’s Guide V

WARNING

• Inspect the test leads for damaged insulation or exposed metal.

Check the test leads for continuity. Replace damaged test leads

before you use the meter.

• Do not operate the meter around explosive gas, vapor, or wet

environments.

• Do not apply more than the rated voltage (as marked on the

meter) between terminals, or between terminal and earth ground.

• If the equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment may be

impaired.

• Never use the meter in wet conditions or when there is water on

the surface. If the meter is wet, ensure that the meter is dried only

by trained personnel.

• Before use, verify the meter's operation by measuring a known

source, for example, voltage.

• When measuring current, turn off the circuit power before

connecting the meter in the circuit. Remember to place the meter

in series with the circuit.

• When servicing the meter, use only the specified replacement

parts.

• Use caution when working above 60 V DC, 30 V AC rms, or 42.4 V

peak. Such voltages pose a shock hazard.

• Do not use the VZLOW (low input impedance) function to measure

voltages in circuits that could be damaged by this function’s low

input impedance of 3 kΩ.

• When using the probes, keep your fingers behind the finger

guards on the probes.

• Connect the common test lead before you connect the live test

lead. When you disconnect the leads, disconnect the live test lead

first.

VI U1231A/U1232A/U1233A User’s Guide

WARNING

• Remove the test leads from the meter before you open the battery

cover.

• Do not operate the meter with the battery cover or portions of the

cover removed or loosened.

• To avoid false readings, which may lead to possible electric shock

or personal injury, replace the battery as soon as the low battery

indicator appears and flashes.

U1231A/U1232A/U1233A User’s Guide VII

Environmental Conditions

This instrument is designed for indoor use and in an area with low

condensation. The table below shows the general environmental

requirements for this instrument.

Environmental condition Requirement

Operating temperature Full accuracy from –10 °C to 55 °C

Operating humidity

Full accuracy up to 80% RH (relative

humidity) for temperature up to 30 °C,

decreasing linearly to 50% RH at 55 °C

Storage temperature –40 °C to 60 °C

Altitude Up to 2000 meters

Pollution degree 2

NOTE

The U1231A/U1232A/U1233A Handheld Digital Multimeter complies with the

following safety and EMC requirements:

•IEC 61010-1:2010/EN 61010-1:2010

•USA: UL 61010-1 (3rd Edition)

•Canada: CSA C22.2 No. 61010-1:2012

VIII U1231A/U1232A/U1233A User’s Guide

Regulatory Markings

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

The C-tick mark is a registered

trademark of the Spectrum

Management Agency of Australia. This

signifies compliance with

the Australia EMC Framework

regulations under the terms of the

Radio Communication Act of 1992.

ICES/NMB-001 indicates that this ISM

device complies with the Canadian

ICES-001.

Cet appareil ISM est confomre a la

norme NMB-001 du Canada.

This instrument complies with the

WEEE Directive (2002/96/EC) marking

requirement. This affixed product label

indicates that you must not discard

this electrical or electronic product in

domestic household waste.

The CSA mark is a registered

trademark of the Canadian Standards

Association.

This symbol indicates the time period

during which no hazardous or toxic

substance elements are expected to

leak or deteriorate during normal use.

Forty years is the expected useful life

of the product.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Keysight Multimeter Handbücher

Keysight

Keysight 34450A Bedienungsanleitung

Keysight

Keysight U1231A Bedienungsanleitung

Keysight

Keysight u1273a Bedienungsanleitung

Keysight

Keysight U1253B Bedienungsanleitung

Keysight

Keysight U1252B Handbuch

Keysight

Keysight EDU34450A Bedienungsanleitung

Keysight

Keysight 3458A Gebrauchs- und Pflegehandbuch

Keysight

Keysight U1251B Fehlerbehebungshandbuch

Keysight

Keysight M9182A Gebrauchs- und Pflegehandbuch

Keysight

Keysight 34401A Bedienungsanleitung

Keysight

Keysight U1231A Bedienungsanleitung

Keysight

Keysight U1271A Bedienungsanleitung

Keysight

Keysight 34401A Technisches Handbuch

Keysight

Keysight U1271A Bedienungsanleitung

Keysight

Keysight 8163A Bedienungsanleitung

Keysight

Keysight 3458A Bedienungsanleitung

Keysight

Keysight U1241B Handbuch

Keysight

Keysight u1273a Bedienungsanleitung

Keysight

Keysight U1271A Bedienungsanleitung

Keysight

Keysight E1412A Betriebsanleitung

Keysight

Keysight U1253B Bedienungsanleitung

Keysight

Keysight U1231A Bedienungsanleitung

Keysight

Keysight U3606A Handbuch

Keysight

Keysight 3458B Gebrauchs- und Pflegehandbuch

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung