Keysight U1271A Bedienungsanleitung

Keysight U1271A/U1272A

Handheld Digital Multimeter

User’s Guide

U1271A/U1272A User’s Guide 3

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies as governed by United States

and international copyright laws.

Manual Part Number

U1271-90010

Edition

Edition 12, December 22, 2014

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Warranty

The material contained in this document is

provided “as is,” and is subject to change,

without notice, in future editions. Further,

to the maximum extent permitted by the

applicable law, Keysight disclaims all

warranties, either express or implied, with

regard to this manual and any information

contained herein, including but not limited

to the implied warranties of merchantabil-

ity and fitness for a particular purpose.

Keysight shall not be liable for errors or for

incidental or consequential damages in

connection with the furnishing, use, or

performance of this document or of any

information contained herein. Should Key-

sight and the user have a separate written

agreement with warranty terms covering

the material in this document that conflict

with these terms, the warranty terms in

the separate agreement shall control.

Technology Licenses

The hardware and or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Keysight provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the likes

of that, if not correctly performed

or adhered to, could result in dam-

age to the product or loss of

important data. Do not proceed

beyond a CAUTION notice until the

indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the likes of that, if not correctly

performed or adhered to, could

result in personal injury or death.

Do not proceed beyond a WARN-

ING notice until the indicated

conditions are fully understood

and met.

4 U1271A/U1272A User’s Guide

Safety Symbols

The following symbols on the instrument and in the documentation

indicate precautions which must be taken to maintain safe operation of

the instrument.

Direct current (DC) Caution, risk of electric shock

Alternating current (AC) Caution, risk of danger (refer to this manual

for specific Warning or Caution information)

Both direct and alternating current Category III 1000 V overvoltage protection

Earth (ground) terminal Category IV 600 V overvoltage protection

Equipment protected throughout by

double insulation or reinforced

insulation

Caution, risk of hazardous voltage (icon

appears on the instrument screen)

CAT III

1000 V

CAT IV

600 V

U1271A/U1272A User’s Guide 5

Safety Considerations

Read the information below before using this multimeter. The descriptions

and instructions in this manual apply to the Keysight U1271A and U1272A

Handheld Digital Multimeters (hereafter referred to as the multimeter).

The model U1272A appears in all illustrations.

CAUTION

•Disconnect circuit power and discharge all high-voltage capacitors

before testing resistance, continuity, diodes, or capacitance.

•Use the proper terminals, function, and range for your

measurements.

•This device is for use at altitudes of up to 2,000 m.

•Never measure voltage when current measurement is selected.

•Always use the specified battery type. The power for the meter is

supplied with four standard AAA 1.5 V batteries. Observe the

correct polarity markings before you insert the batteries to ensure

proper insertion of the batteries in the meter.

•You are advised to use low leakage batteries when changing to new

batteries. Please remember to remove the batteries when the meter

is not in use for a long period of time. Warning on the risk of battery

leakage.

WARNING

• Do not use the multimeter if it is damaged. Before you use the

multimeter, inspect the case. Look for cracks or missing plastic.

Pay particular attention to the insulation surrounding the

connectors.

• Inspect the test leads for damaged insulation or exposed metal.

Check the test leads for continuity. Replace damaged test leads

before you use the multimeter.

• Do not operate the multimeter around explosive gas, vapor, or wet

environments.

• Do not apply more than the rated voltage (as marked on the

multimeter) between terminals, or between terminal and earth

ground.

6 U1271A/U1272A User’s Guide

WARNING

• Never use the multimeter in wet conditions or when there is

water on the surface. If the multimeter is wet, ensure that the

multimeter is dried only by trained personnel.

• Before use, verify the multimeter's operation by measuring a

known voltage.

• When measuring current, turn off the circuit power before

connecting the multimeter in the circuit. Remember to place the

multimeter in series with the circuit.

• When servicing the multimeter, use only the specified

replacement parts.

• Use caution when working above 60 V DC, 30 V AC RMS, or 42.4 V

peak. Such voltages pose a shock hazard.

• Be aware of the presence of hazardous AC voltage before using

the Low Pass Filter (LPF) function for AC voltage measurement.

Voltages measured are usually greater than what indicated on the

multimeter as the AC voltages with higher frequencies have been

filtered through the LPF function.

• Do not use the ZLOW (low input impedance) function (U1272A

only) to measure voltages in circuits that could be damaged by

this function’s low input impedance of 2 kΩ.

• When using the probes, keep your fingers behind the finger

guards on the probes.

• Connect the common test lead before you connect the live test

lead. When you disconnect the leads, disconnect the live test lead

first.

• Remove the test leads from the multimeter before you open the

battery cover.

• Do not operate the multimeter with the battery cover or portions

of the cover removed or loosened.

• To avoid false readings, which may lead to possible electric shock

or personal injury, replace the battery as soon as the low battery

indicator appears and flashes.

U1271A/U1272A User’s Guide 7

Environmental Conditions

This instrument is designed for indoor use and in an area with low

condensation. The table below shows the general environmental

requirements for this instrument.

Environmental conditions Requirements

Operating temperature Full accuracy from –20 °C to 55 °C

Operating humidity

Full accuracy up to 80% RH (relative

humidity) for temperature up to 30 °C,

decreasing linearly to 50% RH at 55 °C

Storage temperature –40 °C to 70 °C

Altitude Up to 2000 meters

Pollution degree Pollution degree II

NOTE

The U1271A/U1272A Handheld Digital Multimeter complies with the following

safety and EMC requirements:

•EN/IEC 61010-1:2001

•ANSI/UL 61010-1:2004

•CAN/CSA-C22.2 No. 61010-1-04

•Commercial limits compliance with EN61326-1

8 U1271A/U1272A User’s Guide

Regulatory Markings

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

The C-tick mark is a registered

trademark of the Spectrum

Management Agency of Australia. This

signifies compliance with

the Australia EMC Framework

regulations under the terms of the

Radio Communication Act of 1992.

ICES/NMB-001 indicates that this ISM

device complies with the Canadian

ICES-001.

Cet appareil ISM est confomre a la

norme NMB-001 du Canada.

This instrument complies with the

WEEE Directive (2002/96/EC) marking

requirement. This affixed product label

indicates that you must not discard

this electrical or electronic product in

domestic household waste.

The CSA mark is a registered

trademark of the Canadian Standards

Association.

This symbol indicates the time period

during which no hazardous or toxic

substance elements are expected to

leak or deteriorate during normal use.

Forty years is the expected useful life

of the product.

U1271A/U1272A User’s Guide 9

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not discard

this electrical or electronic product in domestic household waste.

Product Category:

With reference to the equipment types in the WEEE directive Annex 1, this

instrument is classified as a “Monitoring and Control Instrument” product.

The affixed product label is as shown below.

Do not dispose in domestic household waste.

To return this unwanted instrument, contact your nearest Keysight Service

Centre, or visit

www.keysight.com/environment/product

for more information.

10 U1271A/U1272A User’s Guide

Declaration of Conformity (DoC)

The Declaration of Conformity (DoC) for this instrument is available on the

Keysight Web site. You can search the DoC by its product model or

description at the Web address below.

http://regulations.products.keysight.com/DoC/search.htm

NOTE

If you are unable to search for the respective DoC, please contact your

local Keysight representative.

Andere Handbücher für U1271A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Keysight Multimeter Handbücher

Keysight

Keysight U1251 Bedienungsanleitung

Keysight

Keysight U1271A Bedienungsanleitung

Keysight

Keysight U1231A Bedienungsanleitung

Keysight

Keysight 8163A Bedienungsanleitung

Keysight

Keysight 3458B Gebrauchs- und Pflegehandbuch

Keysight

Keysight U1233A Bedienungsanleitung

Keysight

Keysight U1241C Bedienungsanleitung

Keysight

Keysight U1242C Bedienungsanleitung

Keysight

Keysight u1701b Bedienungsanleitung

Keysight

Keysight U1241AN Handbuch

Keysight

Keysight U1231A Bedienungsanleitung

Keysight

Keysight U1281A Bedienungsanleitung

Keysight

Keysight U1253B Bedienungsanleitung

Keysight

Keysight U1270 Series Bedienungsanleitung

Keysight

Keysight M9182A Gebrauchs- und Pflegehandbuch

Keysight

Keysight U1272A Bedienungsanleitung

Keysight

Keysight U1271A Bedienungsanleitung

Keysight

Keysight M9181A Benutzerhandbuch

Keysight

Keysight u1273a Bedienungsanleitung

Keysight

Keysight U1241C Bedienungsanleitung

Keysight

Keysight 3458A Bedienungsanleitung

Keysight

Keysight U3606A Handbuch

Keysight

Keysight u1273a Bedienungsanleitung

Keysight

Keysight EDU34450A Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung