Keysight 90000 X Series Bedienungsanleitung

Keysight Infiniium

90000 X/L-Series Oscilloscopes

Service Guide

Publication Number 54916- 97010

May 2015

Infiniium 90000 X / L- Series

Oscilloscopes

Keysight Infiniium 90000 X-Series Oscilloscopes at a Glance

Ease of use with high performance

The Keysight Infiniium 90000 X-Series

oscilloscopes combine unprecedented ease-of-

use with high-performance digitizing

oscilloscope functionality to simplify your design

and analysis measurement tasks.

• Traditional oscilloscope front-panel interface

provides direct access to the controls needed

for most troubleshooting tasks.

• Graphical user interface with menus,

windows, dialog boxes, and toolbars provides

easy access to dozens of configuration and

analysis tools, ensuring you can set up and

make the most complex measurements.

• Models with bandwidths from 13 GHz to

32 GHz.

• MSO models provide 10 GSa/s at 16 channels

and 20 GSa/s at 8 channels.

Display shows waveforms and graphical

user interface

• Graphical interface allows direct interaction

with waveforms, including drag-and-drop

positioning and instant waveform zoom.

• Touchscreen display allows oscilloscope

operation without an external pointing device.

• Waveforms displayed in color, making

correlation easy.

• Current configuration parameters are

displayed near the waveform display and are

color-coded to make identification easy.

• Graphical interface menus and toolbars

simplify complex measurement setups.

Horizontal controls set sweep speed and

position

• Intensified waveforms on main sweep

window make it easy to see what will appear

in the zoom window.

Acquisition and general controls start and stop

the oscilloscope and do basic setup

• Run and stop controls for continuous or single

acquisitions.

• Clear display before one or more acquisitions.

• Default setup and Autoscale set initial

configuration.

Solid state drive and USB 2.0 port for saving and

restoring setups and measurement results

• Store measurement displays for inclusion in

reports and test setup guides.

• Store oscilloscope setups to repeat tests

another time.

• Solidstatedrivestoresoscilloscopeoperating

system.

Trigger setup controls set mode and basic

parameters

• Select Edge, Glitch, or Advanced Modes.

• Choose input source and slope.

• Use graphical user interface to simplify

configuration of pattern, state, delay, and

violation trigger modes.

• Use auxiliary trigger to increase triggering

flexibility.

Vertical controls set attenuation and position

• Color-coded knobs make it easy to find the

controls that affect each waveform.

Marker and quick measurements help

measure waveform parameters

• Waveform markers A and B to check voltage

or Δ-time at any point on the displayed

waveform.

In This Service Guide

This guide provides the service information for the Keysight Technologies 90000 X-

Series and 90000 L-Series oscilloscopes. It is divided into seven chapters.

Chapter 1, "General Information," describes which oscilloscope models are covered by

this guide, supplied accessories, and where to find the specifications for the 90000 X-

Series / 90000 L- Series oscilloscopes.

Chapter 2, "Calibration," describes the types of calibrations, and how and when to run

the user calibration procedure.

Chapter 3, "Testing Performance," provides instructions for testing the oscilloscope to

verify that it performs according to specifications.

Chapter 4, "Troubleshooting," provides flowcharts and procedures for diagnosing

problems for assembly- level repair.

Chapter 5, "Replacing Assemblies," provides instructions for removing and replacing

assemblies in the oscilloscope.

Chapter 6, "Replaceable Parts," provides exploded parts diagrams and a list for ordering

replaceable parts.

Chapter 7, "Theory of Operation," describes the basic structure of the oscilloscope and

how its parts interact.

At the back of the book you will find safety notices.

Instruments covered by this service guide 8

Accessories supplied 9

Specifications and Characteristics 9

General Information

Instruments covered by this service guide

Oscilloscopes manufactured after the date this manual was released may be different

from those described in this manual. The release date of this manual is shown on the

title page. This manual will be revised when necessary.

If you have an oscilloscope that was manufactured after the release of this manual,

please check the Keysight Technologies website at www.keysight.com to see whether a

newer version of this manual is available.

The following 90000 X- Series and L- Series oscilloscopes are covered in this guide.

The oscilloscope model can be identified by the product number on the front or

rear panel.

Model Bandwidth

MSOX/DSOX/DSAX91304A 13 GHz bandwidth

MSOX/DSOX/DSAX91604A 16 GHz bandwidth

MSOX/DSOX/DSAX92004A 20 GHz bandwidth

MSOX/DSOX/DSAX92504A 25 GHz bandwidth

MSOX/DSOX/DSAX92804A 28 GHz bandwidth

DSO/DSA93004L 30 GHz bandwidth

MSOX/DSOX/DSAX93204A 32 GHz bandwidth

Chapter 1: General Information

Accessories supplied

The following accessories are supplied.

•Mouse

•Stylus

•Keyboard

• Accessory pouch

• Front panel cover

•Calibration cable

• Connector saver collars (qty 10)

• Connector savers (f- f) (qty 5)

• Power cord (see parts list in chapter 6 for country- dependent part number)

•ESD wrist strap

• Digital channels cable (MSO models only): Keysight part number N2815- 68701

• MSO calibrator board assembly (MSO models only): Keysight part number N2834- 68703

Specifications and Characteristics

The following table contains a partial list of specifications and characteristics for the

Keysight Infiniium 90000 X- Series oscilloscopes. For a full list of specifications and

characteristics, see the data sheets at www.keysight.com/find/90000x- series.

Specifications that are pertinent to each test are in the "Testing Performance" chapter.

Specifications are valid after a 30- minute warm- up period, and within ±5°C from the

temperature at which the last self- calibration was performed.

Environment Indoor use only.

Ambient

temperature

Operating 5 °C to +40 °C

Non-operating –40 °C to +65 °C

Humidity Operating: up to 95% relative humidity (non-condensing) at +40 °C

Non-operating: up to 90% relative humidity at +65 °C

Altitude Operating: up to 4,000 m (12,000 feet)

Non-operating: up to 15,300 meters (50,000 feet)

Installation/

Measurement

Category

Installation category: II

Measurement category: 1

Power Requirements 100-240 V, 47-63 Hz; 800 W for 4-channel models.

100-240 V, 50 Hz;100-208 V, 50/60 Hz; 800 W for 8-channel models.

Voltage Fluctuations Note that the mains supply voltage fluctuations are not to exceed +/-10% of the

nominal supply voltage.

Pollution Degree The Infiniium 90000 X-Series oscilloscopes may be operated in environments of

Pollution Degree 2.

Chapter 1: General Information

Specifications and Characteristics

Pollution Degree

Definitions

Pollution Degree 1: No pollution or only dry, non-conductive pollution occurs. The

pollution has no influence. Example: A clean room or climate-controlled office

environment.

Pollution Degree 2. Normally only dry non-conductive pollution occurs. Occasionally a

temporary conductivity caused by condensation may occur. Example: General indoor

environment.

Pollution Degree 3: Conductive pollution occurs, or dry, non-conductive pollution

occurs which becomes conductive due to condensation which is expected. Example:

Sheltered outdoor environment.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Keysight Prüfgeräte Handbücher

Keysight

Keysight N4891A 400GBASE Bedienungsanleitung

Keysight

Keysight N109228CA OIF CEI 3.1 Bedienungsanleitung

Keysight

Keysight N443xD Bedienungsanleitung

Keysight

Keysight N4960A Bedienungsanleitung

Keysight

Keysight N5281A Handbuch

Keysight

Keysight N5242-60124 Bedienungsanleitung

Keysight

Keysight 1000 Series Bedienungsanleitung

Keysight

Keysight DSOX3012T Bedienungsanleitung

Keysight

Keysight TS-5020 Bedienungsanleitung

Keysight

Keysight TS-5020 Betriebsanleitung

Keysight

Keysight X8711A Bedienungsanleitung

Keysight

Keysight 16117C Bedienungsanleitung

Keysight

Keysight U1452AT Bedienungsanleitung

Keysight

Keysight Infiniium 9000 Series Bedienungsanleitung

Keysight

Keysight N5990A Type-C Bedienungsanleitung

Keysight

Keysight N2840A Bedienungsanleitung

Keysight

Keysight InfiniiVision 4000 X Series Bedienungsanleitung

Keysight

Keysight 16048D Bedienungsanleitung

Keysight

Keysight Infiniium S Series Bedienungsanleitung

Keysight

Keysight N5245-60125 Kurzanleitung

Keysight

Keysight P9241 Betriebsanleitung

Keysight

Keysight MultiScope UXR Series Bedienungsanleitung

Keysight

Keysight InfiniiVision 4000G X Series Bedienungsanleitung

Keysight

Keysight DCA-X Series Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung