Keysight Infiniium 9000 Series Merkblatt

Keysight Infiniium

9000 Series Oscilloscopes

Evaluation Guide

The most recent PDF version of this guide will be placed on the

Keysight web site at:

http://literature.cdn.keysight.com/litweb/pdf/N2918-97003.pdf

Notices

2009

No part of this manual may be

reproduced in any form or by any

means (including electronic stor-

age and retrieval or translation into

a foreign language) without prior

agreement and written consent

from Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Manual Part Number

N2918-97003

Edition

Third edition, August 2009

Printed in U.S.A.

Keysight Technologies, Inc.

1900 Garden of the Gods Rd.

Colorado Springs, CO 80907 USA

Warranty

The material contained in this doc-

ument is provided “as is,” and is

subject to being changed, without

notice, in future editions. Further,

to the maximum extent permitted

by applicable law, Keysight dis-

claims all warranties, either

express or implied, with regard to

this manual and any information

contained herein, including but

not limited to the implied warran-

ties of merchantability and fitness

for a particular purpose. Keysight

shall not be liable for errors or for

incidental or consequential dam-

ages in connection with the fur-

nishing, use, or performance of

this document or of any informa-

tion contained herein. Should Key-

sight and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the

separate agreement shall control.

Technology Licenses

The hardware and/or software

described in this document are fur-

nished under a license and may be

used or copied only in accordance

with the terms of such license.

Restricted Rights

Legend

If software is for use in the perfor-

mance of a U.S. Government prime

contract or subcontract, Software

is delivered and licensed as “Com-

mercial computer software” as

defined in DFAR 252.227-7014

(June 1995), or as a “commercial

item” as defined in FAR 2.101(a) or

as “Restricted computer software”

as defined in FAR 52.227-19 (June

1987) or any equivalent agency

regulation or contract clause. Use,

duplication or disclosure of Soft-

ware is subject to Keysight Tech-

nologies’ standard commercial

license terms, and non-DOD

Departments and Agencies of the

U.S. Government will receive no

greater than Restricted Rights as

defined in FAR 52.227-19(c)(1-2)

(June 1987). U.S. Government

users will receive no greater than

Limited Rights as defined in FAR

52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November

1995), as applicable in any techni-

cal data.

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice,

or the like that, if not correctly

performed or adhered to, could

result in damage to the prod-

uct or loss of important data.

Do not proceed beyond a CAU-

TION notice until the indicated

conditions are fully understood

and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice,

or the like that, if not correctly

performed or adhered to,

could result in personal injury

or death. Do not proceed

beyond a WARNING notice

until the indicated conditions

are fully understood and met.

Keysight Infiniium 9000 Series Oscilloscope Evaluation Guide 3

Keysight Infiniium 9000 Series Oscilloscope

Evaluation Guide

Does your job require an oscilloscope that can adapt to a wide variety of debug

and test challenges? Keysight engineers developed the Infiniium 9000 Series

oscilloscopes with the industry’s broadest measurement capability. What gives

the Infiniium 9000 Series the industry’s broadest measurement capability?

1. Best Fit for Workspace

Oscilloscopes are visual tools and large, high-resolution displays make the

product better. Largest in the industry, the 15” XGA screen makes it easier to

view analog, digital, or serial signals, especially when you need to view

multiple signals simultaneously.

Limited bench space? Not a problem. To achieve the thinnest depth, lightest

weight, and smallest footprint in its class, Keysight engineers developed a

single-acquisition board oscilloscope that extends up to 4 GHz bandwidth. A

precision-engineered dense 20-layer printed circuit board, 27 custom ASICs,

and multiple FPGAs, enables the instrument’s innovative form factor.

2. Three Instruments in One

With superior oscilloscope specifications and rich built-in analysis, the

Infiniium 9000 Series extends oscilloscope-centric testing with logic and

protocol analysis capabilities. Mixed-signal oscilloscope (MSO) models add

integrated 2 GSa/s digital channels. Infiniium 9000 Series oscilloscopes

incorporate hardware-based protocol triggering, protocol decode, and the

industry’s first oscilloscope-based protocol viewer that extends to PCI Express

and USB.

3. Widest Range of Debug and Compliance Application

Software

Expand your oscilloscope’s capabilities with our powerful lineup of

applications.

Keysight wants to help you get fast, accurate answers to your measurement

questions. That’s why the Infiniium 9000 Series oscilloscopes offer the largest

range of software applications engineered to quickly and easily provide

exceptional insight into technology-specific testing.

4 Keysight Infiniium 9000 Series Oscilloscope Evaluation Guide

Required Equipment

• Keysight Infiniium 9000 Series oscilloscope.

• Two passive probes.

• Demo kit with demo board and USB cable.

Demo board connections:

Power is provided via

USB or MSO cable.

Oscilloscope Probe Connections

MODE Action

Select Knob

Power

MSO Cable

Connection

(Digital Inputs)

InfiniiMax

differential probe

Keysight Infiniium 9000 Series Oscilloscope Evaluation Guide 5

In This Guide

If you are experiencing the Infiniium 9000 Series oscilloscope for the first time,

begin with Lab 1, the Getting Started Guide. If you have a basic knowledge of

the Infiniium 9000 Series oscilloscope’s front-panel controls, begin with Lab 2.

Topic Page

Time

Allowance

Lab 1:Getting Started 7 10 min.

Lab 2:Viewing Complex Signals 22 10 min.

Lab 3:Uncovering Signal Anomalies with

Responsive Deep Memory 26 10 min.

Lab 4:InfiniiScan Triggering 29 5 min.

Lab 5:Mixed-Signal Oscilloscope (MSO) 32 10 min.

Lab 6:USB 36 10 min.

Lab 7:I2C 45 10 min.

Lab 8:SPI 49 10 min.

Lab 9:CAN 55 10 min.

Lab 10:RS-232 57 10 min.

Lab 11:Segmented Memory 61 10 min.

Lab 12:Histograms 65 5 min.

Appendix A:Using Trigger Holdoff to Synchronize

Acquisition/Display on Complex Signals 67 10 min.

6 Keysight Infiniium 9000 Series Oscilloscope Evaluation Guide

Keysight Infiniium 9000 Series Oscilloscopes

1 Getting Started

If you are not familiar with the Keysight Infiniium 9000 Series oscilloscopes,

please first look over the main sections of the front panel as illustrated and

then follow the exercises.

1Getting Started

8 Keysight Infiniium 9000 Series Oscilloscope Evaluation Guide

Drag-and-drop

measurements

Status tab shows

current settings

Mixed-signal oscilloscope

(MSO) cable connection

15" XGA touch screen

display

AutoProbe interface

Getting Started 1

Keysight Infiniium 9000 Series Oscilloscope Evaluation Guide 9

Run Control

Selection knob, immediate action keys, and special menus

Push the knob to toggle selection

Trigger level knob

and controls

Time/div and position

horizontal controls

Color-coded controls

for each oscilloscope

channel

Digital button for

mixed-signal

oscilloscope (MSO)

channels D0 – D15

Serial Decode button

for quick decode

access

USB ports

1Getting Started

10 Keysight Infiniium 9000 Series Oscilloscope Evaluation Guide

Capturing and Viewing a Simple Signal

1To power the demo board, connect a USB cable between it and the

Keysight Infiniium 9000 Series oscilloscope.

You can also apply power by connecting the oscilloscope’s MSO cable to

the demo board’s 40-pin connector.

2Connect the scope channel 1 probe to demo board CH1 and GND.

3Turn the SELECT switch to position 3 (Burst).

4Press the [Default Setup] key on the front panel.

The oscilloscope is now set in the default configuration. Because the

oscilloscope may have been used in a variety of applications by a variety of

people, it is a good measurement procedure to put the oscilloscope in a

known starting mode (Default Setup). This will make it easy to duplicate

measurements as no special conditions will be set.

Press

Andere Handbücher für Infiniium 9000 Series

Inhaltsverzeichnis

Andere Keysight Prüfgeräte Handbücher

Keysight

Keysight M8050A Bedienungsanleitung

Keysight

Keysight 16034G Bedienungsanleitung

Keysight

Keysight 85132E Technisches Datenblatt

Keysight

Keysight InfiniiVision 4000G X Series Bedienungsanleitung

Keysight

Keysight M8000 Series Bedienungsanleitung

Keysight

Keysight M8920A Bedienungsanleitung

Keysight

Keysight 1180CZ Bedienungsanleitung

Keysight

Keysight InfiniiVision DSOX1204A Bedienungsanleitung

Keysight

Keysight Infiniium MXR Series Bedienungsanleitung

Keysight

Keysight InfiniiVision EDUX1002A Bedienungsanleitung

Keysight

Keysight InfiniiVision 2000 X Series Bedienungsanleitung

Keysight

Keysight N109 Series Bedienungsanleitung

Keysight

Keysight Infiniium 9000 Series Bedienungsanleitung

Keysight

Keysight U1452A Bedienungsanleitung

Keysight

Keysight U1401B Bedienungsanleitung

Keysight

Keysight E6610A Betriebsanleitung

Keysight

Keysight Infiniium 90000A Series Bedienungsanleitung

Keysight

Keysight 16092A Bedienungsanleitung

Keysight

Keysight U3020AS26 Handbuch

Keysight

Keysight U3042AE16 Handbuch

Keysight

Keysight 9000 Series Bedienungsanleitung

Keysight

Keysight 4000 X-Series Einrichtungshandbuch

Keysight

Keysight ixia UHD100T32 Bedienungsanleitung

Keysight

Keysight N1930 B Series Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung