Keysight U1610/20A Bedienungsanleitung

Keysight U1610/20A

Handheld Digital

Oscilloscope

Quick Start

Guide

Contacting Keysight

www.keysight.com/find/assist

(worldwide contact information for

repair and service)

Safety and EMC Information

This handheld scope is certified to

the following safety and EMC

requirements.

– IEC 61010-1/EN 61010-1, IEC

61010-2-033/EN 61010-2-033

– Canada: CAN/CSA-C22.2

No. 61010-1, CAN/CSA-C22.2

No. 61010-2-033

– USA: ANSI/UL Std. No. 61010-1,

ANSI/UL Std. No. 61010-2-033

– IEC 61326-1/EN 61326-1

– Australia/New Zealand: AS/NZS

CISPR 11

– Canada: ICES/NMB-001

Use with compatible test probe/

leads.

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly

performed or adhered to, could

result in damage to the product or

loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are

fully understood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly

performed or adhered to, could

result in personal injury or

death. Do not proceed beyond a

WARNING notice until the

indicated conditions are fully

understood and met.

Safety symbols

Direct current (DC)

Alternating current (AC)

Both direct and alternating

current

Earth (ground) terminal

Caution, risk of danger

(refer to the instrument

manual for specific Warning

or Caution information)

Equipment protected

throughout by double

insulation or reinforced

insulation

Caution, risk of electric

shock

CAT II Category II overvoltage

protection

CAT III Category III overvoltage

protection

2 Keysight U1610/20A Quick Start Guide

For further safety information details, refer to the

Keysight U1610/20A Handheld Digital Oscilloscope User’s Guide.

ENGLISH

Keysight U1610/20A Quick Start Guide 3

ENGLISH

Verify that you received the following items in the

shipment of your handheld scope:

4Power cable

4Li-Ion battery pack, 10.8 V (included in the

handheld scope)

4AC/DC adapter

410:1 CAT III 600 V scope probe

4BNC-to-probe adapter

4DMM (digital multimeter) test lead kit

4USB cable

Hand strap (attached on the handheld scope)

4Neck strap

4Certificate of Calibration

If anything is missing or damaged, contact the

nearest Keysight Sales Office.

NOTE All related documents and software are available for

download at www.keysight.com/find/hhTechLib.

4 Keysight U1610/20A Quick Start Guide

ENGLISH

Charge the Battery

Before using the handheld scope for the first time

or after a prolonged storage period, fully charge

the battery for at least 3 hours, with the handheld

scope turned off, using the AC/DC adapter

provided. If the battery is fully discharged after

subsequent use, charge the battery with the

handheld scope turned on.

The power key will turn constant yellow when

the battery is fully charged.

Keysight U1610/20A Quick Start Guide 5

ENGLISH

Power On the Handheld Scope

Press and hold for approximately 3 seconds.

When the handheld scope display appears, the

handheld scope is ready for use.

NOTE Hook up all cables and accessories before applying

power. You can connect/disconnect probes while

the handheld scope is turned on.

6 Keysight U1610/20A Quick Start Guide

ENGLISH

Product Outlook

Scope terminals

Display screen

Function softkeys

To perform the

function displayed

above each softkey.

Acquisition and

function controls

To access the scope,

meter, logger,

system, and help

functions.

Vertical controls

To set the

vertical scaling

(volt/div) and

vertical offset.

Power key

USB interface

connectorand

DC power

inlet

Directional keys

Horizontal controls

To control the sweep speed

(sec/div) and horizontal position

of the waveform. Use

to zoom into the waveform.

Meter terminals

Keysight U1610/20A Quick Start Guide 7

ENGLISH

Oscilloscope Display

Multimeter Display

1 5

8 Keysight U1610/20A Quick Start Guide

ENGLISH

Logger Display

1Displays the channel and timebase setup

information.

2Displays the channel input waveforms.

3Displays the sample rate.

4Displays the key/softkey function menus.

5Displays the signal acquisition mode.

6Displays the battery status and AC

connectivity for battery charging.

7Displays the signal triggering status.

8Displays the date and time.

9Displays the acquisition, start date and time,

and duration status.

10 Displays the measurement.

11 Displays the virtual measurement scale.

12 Displays the average, maximum, and

minimum values.

13 Indicates the auto or manual ranging mode.

14 Displays the logging graph.

Keysight U1610/20A Quick Start Guide 9

ENGLISH

Set the Date and Time

Press > > . Press

any softkey and use the or key to change

the values.

Set the Language

Press > > and use

the keys to select the language.

Press again to exit the selection menu.

Reset the Oscilloscope

Press > .

NOTE is only accessible when in the Scope

mode.

NOTE Before resetting to factory default settings, you may

want to save the current handheld scope

configuration for later use by pressing >

NOTE For details on using the oscilloscope functions, see

the User’s Guide.

10 Keysight U1610/20A Quick Start Guide

ENGLISH

Data Logging

The data logger acts as a recorder to log and plot

input signal trends for both scope and meter

measurements.

To access the logger mode, press .

Connect Probes to Oscilloscope Terminals

NOTE For details on using the logger functions, see the

User’s Guide.

Inhaltsverzeichnis

Sprachen:

Andere Keysight Prüfgeräte Handbücher

Keysight

Keysight E6610A Betriebsanleitung

Keysight

Keysight 16442B Bedienungsanleitung

Keysight

Keysight N5990A Type-C Bedienungsanleitung

Keysight

Keysight 16092A Bedienungsanleitung

Keysight

Keysight U1731C Bedienungsanleitung

Keysight

Keysight Infiniium MXR Series Bedienungsanleitung

Keysight

Keysight ZA0060A Bedienungsanleitung

Keysight

Keysight N5990A-155 Bedienungsanleitung

Keysight

Keysight 8497K Service-Handbuch

Keysight

Keysight Infiniium 8000 Series Bedienungsanleitung

Keysight

Keysight 10070D Bedienungsanleitung

Keysight

Keysight U2701A Bedienungsanleitung

Keysight

Keysight 16451B Bedienungsanleitung

Keysight

Keysight InfiniiVision M9241A Bedienungsanleitung

Keysight

Keysight U1610A Bedienungsanleitung

Keysight

Keysight Infiniium 9000 Series Merkblatt

Keysight

Keysight N109228CA OIF CEI 3.1 Bedienungsanleitung

Keysight

Keysight E6607B Bedienungsanleitung

Keysight

Keysight U1452A Bedienungsanleitung

Keysight

Keysight N5241BU-205 Installations- und Betriebshandbuch

Keysight

Keysight 11636A Service-Handbuch

Keysight

Keysight TS-5020 Betriebsanleitung

Keysight

Keysight N4960A Bedienungsanleitung

Keysight

Keysight E6640A Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung