KICK ASS LITHIUM LiFePO4 L1 Bedienungsanleitung

USER MANUAL

VER 1.05

LITHIUM

LiFePO4 POWER STATION

OPTIONAL TRAY

Optional 6AWG Inverter Cable (1.5m)

POWER STATION

Why KickAss?

What makes KickAss diﬀerent is the

fact that we oﬀer the complete

solution: KickAss Lithium Power

Station, Solar Panels, Portable

Fridges, AC Chargers and everything

you need to get your oﬀ-grid camping

needs solved in one place.

The KickAss Lithium Power Station

has been designed in-house by the

KickAss Team and has taken over 4

years of hard work and dedication to

complete. We listened to our

customers over many years to make a

feature rich and practical portable

power station.

Congratulations On Purchasing Your

New KickAss LiFePO4 L1 Power Station

IMPORTANT SAFETY INSTRUCTIONS

ŸFor charging 12V KickAss 120Ah LiFePO4 batteries.

ŸThe total current draw from the battery must not exceed 100 Amps. Should the

current draw exceed 100 Amps, the internal BMS will shut down

ŸNever attempt to recharge non-rechargeable batteries.

ŸThe lid of the battery box must remain shut at all times whilst charging a battery or

powering a device from an outlet.

ŸDo not allow any metal objects to fall into the battery box or enter any of the ports.

ŸNever insert anything other than a compatible electrical plug into any of the ports on

the battery box.

ŸEnsure that the battery box is shut and the screws are tight before powering any

devices.

ŸDo not try to jumpstart a vehicle with this battery box.

LITHIUM

LiFePO4 POWER STATION

OFF

-88.88

CURRENT

26.70

TEMPERATURE

8H 32M

TIME TO EMPTY

VOLTAGE

13.00 V

PAGE 1 PAGE 2

100%

DISCHARGING

OFF

-88.88

CURRENT

26.70

TEMPERATURE

8H 32M

TIME TO EMPTY

VOLTAGE

13.00 V

PAGE 1 PAGE 2

100%

DISCHARGING

LITHIUM

LiFePO4 POWER STATION

OVERVIEW

CIGARETTE

SOCKET

2.4A USB &

QC3.0 USB

CIGARETTE

SOCKET

MAIN

ON/OFF

SWITCH

BATTERY

MONITORING

LCD screen

DCDC CHARGER

CARRY

HANDLE

CARRY

HANDLE

2.4A USB &

QC3.0 USB

BATTERY BOX

LID

BATTERY BOX

BASE

2X IN/OUT

POWER CONNECTORS

ALTERNATOR

INPUT

SOLAR

INPUT

HIGH POWER

CONNECTOR

(100AH MAX)

4X IN/OUT POWER

CONNECTORS

TIE DOWN

STRAP HOLE

FRONT

BACK SIDE

Material

ABS

Temperature Range

-10ºC to +60ºC

Plug and wires go up

and are hidden behind

a channel on the back

of the battery box.

CAUTION

• Do NOT short circuit the battery terminals.

• Do NOT incinerate, crush, puncture, or disassemble.

• Do NOT discard in ﬁre or expose to excessive heat.

• Do NOT overcharge or over-discharge.

• Do NOT immerse in any liquid.

• Store at a minimum capacity of 50%, recharge

every 3 months.

• Only use approved battery charger.

• Not suitable for parallel or series connection.

12V 120AH LiFePO4

LITHIUM BATTERY

KA12120-LION

Battery Type

Rated Voltage

Rated Capacity

Energy

Max Charge Voltage

Charge Temperature

Max Continuous Charge Current

Discharge Temperature

Max Continuous Discharge Current

Battery Low Voltage Cutout

LiFePO4

12.8V

120Ah

1536Wh

14.6V

0~45 °C

40A

-20~60 °C

100A

10V

Step 1: Peel oﬀ plastic ﬁlm to expose the

non-slip surface of silicone pads.

Step 2: Lower your battery into the battery

box base carefully, locating it as centrally

as possible on the non-slip pads.

Step 3: Secure the battery in place by

tightening the velcro strap over the

battery.

Step 4: Install the battery cables onto the

terminal posts of the battery. Ensure red

cable is connected to positive (+)

terminal, both black cables are

connected to the negative (-) terminal

and the black data connector on the lid is

connected to the data connector on the

battery

Note: the pads may be washed to

regain stickiness.

OFF

GETTING STARTED

LITHIUM

LiFePO4 POWER STATION

KA12120-LION

12V 120AH LiFePO4

LITHIUM BATTERY

CAUTION

• Do NOT short circuit the battery terminals.

• Do NOT incinerate, crush, puncture, or disassemble.

• Do NOT discard in ﬁre or expose to excessive heat.

• Do NOT overcharge or over-discharge.

• Do NOT immerse in any liquid.

• Store at a minimum capacity of 50%, recharge

every 3 months.

• Only use approved battery charger.

• Not suitable for parallel or series connection.

12V 120AH LiFePO4

LITHIUM BATTERY

KA12120-LION

Battery Type

Rated Voltage

Rated Capacity

Energy

Max Charge Voltage

Charge Temperature

Max Continuous Charge Current

Discharge Temperature

Max Continuous Discharge Current

Battery Low Voltage Cutout

LiFePO4

12.8V

120Ah

1536Wh

14.6V

0~45 °C

40A

-20~60 °C

100A

10V

OFF

LITHIUM

LiFePO4 POWER STATION

Step 5: Tuck cables in under the battery

box lid, lowering the lid carefully onto the

box - ensuring the lid is correctly oriented.

Step 6: Install the 4 provided screws to

fasten the lid to the base, being sure not

to over tighten with the supplied allen key.

OFF

-88.88

CURRENT

26.70

TEMPERATURE

8H 32M

TIME TO EMPTY

VOLTAGE

13.00 V

PAGE 1 PAGE 2

100%

DISCHARGING

LITHIUM

LiFePO4 POWER STATION

Step 7 ATTENTION: Ensure Lithium is selected as the battery type. If it is not, select

Lithium as the battery type on the DCDC charger by holding the MODE button for 5

seconds or until the battery light starts ﬂashing. Then select LITHIUM and wait for the

battery light to stop ﬂashing. When this occurs, your selection is saved.

1234

MODE

BATTERY TYPE

WETGEL AGM CALCIUM LITHIUM

BULK ABSORPTION FLOAT PULSE

SOLAR

ALTERNATOR

CHARGING

12V 25A DC 4-STAGE

-88.88

CURRENT

26.70

TEMPERATURE

8H 32M

TIME TO EMPTY

VOLTAGE

13.00 V

PAGE 1 PAGE 2

100%

DISCHARGING

BATTERY

329mm L x 171mm W x 222mm H

14.3kg

Lithium LiFePO4

12.8V

120Ah

50A

Discharge: -20 - 60°C

Storage: -20 - 45°C

Charge: 0 - 45°C

<3% of capacity declined per month at 25°C

Battery Dimensions

Battery Weight

Battery Chemistry

Battery Nominal Voltage

Battery Capacity

Max Charge Current

Operating Temperatures

Self Discharge

Features

Ÿ120Ah Lithium Iron Phosphate (LiFePO4) battery

Ÿ100A Internal Battery Management System (BMS)

ŸBMS supervised Lithium Battery Protection and alarms

ŸBluetooth compatibility with KA app (Android and iOS)

ŸLCD screen unit connection to BMS

ŸApproximately 2000 Cycles at 1C discharge, and up to 4000 cycles at lower

discharge rates.

ŸLow self-discharge and long shelf life

Note: The total current draw from the battery must not exceed 100 Amps. Exceeding 100A will

trigger the BMS over current protection feature.

BMS Protection Features

ŸBattery over and under voltage protection

ŸBattery over and under temperature

protection

ŸBattery over charge and discharge protection

ŸBattery short circuit protection

Applications

ŸSolar System

ŸTelecommunications

Ÿ4WD Dual Battery Systems

ŸCaravan, Motorhome Systems

ŸEmergency Power System

329mm 171mm

222mm

14.3kg

KA12120-LION

12V 120AH LiFePO4

LITHIUM BATTERY

Step 1:

Conﬁrm install location of tray, drilling any required

holes.

Install the strap under the tray, sliding the strap into

the slots either side.

Ensure strap is oriented correctly so that the hooks

face toward the Power Station when installed.

Securely aﬃx the tray in position using bolts or

screws, whichever is applicable.

Ensure that washers are used when installing the

tray, to avoid damage.

Note: We do not provide the screws or bolts for this

installation.

Step 2: Ensure straps are laying outside

the tray before lowering the battery box

carefully onto the tray. Attach each strap

hook to the corresponding slot in the

Power Station.

Step 3: For ease of tightening, place

thumbs in each strap loop, pushing ﬁrmly

downwards. The strap should tighten and

hold the Power Station ﬁrmly in place.

To release, depress the buckle and pull

the strap to loosen.

MOUNTING TRAY (OPTIONAL)

TOP BOTTOM

OPTIONAL ACCESSORIES

LITHIUM

LiFePO4 POWER STATION

SKU: KAJBLBASE | V1.8

OFF

00.88

CURRENT

26.70

TEMP

7H 43M

TIME TO EMPTY

VOLTAGE

12.75 V

PAGE 1

90%

DISCHARGING

PAGE 2

Inverter Cables (Optional)

KickAss Inverter leads have been designed to allow you to

easily connect a high powered inverter to the battery box.

When it comes to Inverter cables, there is no substitute for

quality and these KickAss Inverter Cables have been

designed to work ﬂawlessly and to provide a high current

ﬂow to your inverter.

Note:

ŸThe internal BMS will not allow more than 100 amps to

be drawn from the battery, do not exceed a 1200W

inverter load.

SWITCHES

The Master Switch

The master switch disconnects everything (except for the large

175 amp Anderson style plug and the LCD screen) from the

battery, including the DCDC Charger. Turning it oﬀ is a quick

way to disconnect all devices to ensure your battery is not being

drained.

Note: The DCDC Charger + Solar Regulator cannot charge the

internal battery while the Master Switch is in the OFF position,

neither can an externally connected charger.

LCD SCREEN

The KickAss Lithium Battery Box Monitor has a display and two buttons. The screen is

used to monitor the state and condition of the battery. The display features the following:

ŸBattery State of Charge (SoC).

ŸInstantaneous Current Flow, positive when charging, negative when discharging

ŸBattery pack voltage and individual cell voltages

ŸBattery Temperature

ŸRemaining time to full/empty at the current rate of charge/discharge

ŸTotal Capacity of Battery

ŸNumber of full cycles the battery has completed. A full cycle is deﬁned by 100%

discharge and re-charge of a battery. Depleting a battery to 50% and recharging it

twice will result in 1 cycle.

ŸMutable Low Battery Alarm

ŸBattery Capacity Condition State (Excellent, Good, Fair, Bad)

ŸBattery Protection Alarms

Note: Only turn this switch oﬀ when placing the battery in storage and

not attempting to charge.

000.00

CURRENT

27.30

TEMP

524H-08M

TIME TO EMPTY

VOLTAGE

13.46 V

90%

STANDBY

PAGE 2PAGE 1

State of

Charge

State of

Charge Ring

Load

State

Instantaneous

Current In/Out

Battery

Voltage

Battery

Temperature

Time to

Full/Empty

Page Number

PAGE 1 PAGE 2

120AH

EXCELLENT CYCLES

0161

3364mV

CELL 1

3364mV

CELL 2

3366mV

CELL 3

3363mV

CELL 4

Turning the screen on/oﬀ

The screen can be turned on/oﬀ by clicking Button B. To save

power, the screen will turn oﬀ automatically after prolonged

inactivity. To set the duration of the screen "On" time before

turning oﬀ, hold Button B for ﬁve seconds until the Screen

time menu appears. Navigate through the menu using the

buttons. To conﬁrm selection, wait 5 seconds for the home

screen to return.

Switching between Displays

The display can be switched between Page 1 and Page 2 by

clicking Button A.

Low Battery Alarm & Muting Feature

A low battery alarm will sound when the batteries state of

charge falls below 10%. To mute the alarm, press and hold

button A for 5 second or until the muted symbol displays on

page 1 of the display. The alarm will stay muted for 8hrs or

until the battery is charged suﬃciently.

SCREEN TIME

30 SECONDS

1 MINUTE

2 MINUTES

5 MINUTES

1 HOUR

Individual Cell Voltage

Battery

Capacity

Battery

Condition

Cumulative

Completed Cycles

Muted Low

Battery Alarm

PRESS AND HOLD

FOR 5 SECONDS

KickAss LITHIUM APP

The KickAss Lithium Battery has

been designed with the latest

bluetooth technology to remotely

monitor your battery from your

smartphone. The app features the

following:

ŸState of Charge (SoC)

ŸInstantaneous Current Flow,

positive when charging, negative

when discharging

ŸBattery Pack and Cell Voltage.

ŸBattery Temperature

ŸRemaining time to full/empty at

the current rate of

charge/discharge

ŸTotal Capacity of Battery

ŸNumber of full cycles the battery

has completed. A full cycle is

deﬁned by 100% discharge and

re-charge of a battery. Depleting

a battery to 50% and recharging

it twice will result in 1 cycle.

ŸLow Battery Alarm

ŸBattery Capacity Health Indicator

ŸBattery Protection Alarms

Temperature

2740 C

Status

Standby

Current

0.00 A

Voltage

14.25 V

Time To Empty 806H-40M

Time To Full - -

State of Charge

100%

State Of

Charge Ring

State Of Charge

Instantaneous

Current In/out

Load State

Time To Empty

(when Discharging)

Time To Full

(when Charging)

Battery

Voltage

Battery

Temperature

Diﬀerent Pages

Cell 1

3573 mV

Cell 2

Battery Cells

3556 mV

State of Charge

Excellent

Serial Number

LT12RA3921A3921A3.00001

Rated Capacity

121.00 AH

Cycles

Cell 4Cell 3

3538 mV 3575 mV

Battery

Condition

Battery

Serial

Number

Battery

Capacity

Cumulative

Completed

Cycles

Individual

Cell Voltages

System Warnings

Temperature

System

Warning

Page

Temperature

Unit Setting

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KICK ASS Tragbarer Generator Handbücher

KICK ASS

KICK ASS Jaxbox X1 Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

evertz

evertz 7700 Series Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung

Wallenstein

Wallenstein GF5000A Bedienungsanleitung

Leroy-Somer

Leroy-Somer LSA 49.1 Bedienungsanleitung

Yamakoyo

Yamakoyo SH2900DX Bedienungsanleitung