Kiramek VISION 1440B Bedienungsanleitung

FACTORY KEYLESS UPGRADE SECURITY

1440B

Ver. 2.1, Feb. 2014

Thank you for purchasing this VISION

1440B Vehicle Security System. The 1440

is a state of the art device that will pro-

vide you with years of trouble free ser-

vice if used properly. Please familiarize

yourself with the content of this Owner’s

Guide to get the most out of your new

system. We trust you will enjoy using the

product.

NOTICE! Although reasonable efforts have been taken to ensure accuracy in this

Owner’s Guide, Kiramek Inc. shall not be held liable for any errors, omissions, prop-

erty damage, or injury resulting from the use of this information.

All product specifications and features are subject to change without notice.

TA B L E O F C ON T E N T S

Limited Lifetime Warranty ................................... 1

Included Items ............................................ 2

System Operation ......................................... 3

Arming ................................................ 3

Disarming ............................................. 3

Trunk Release .......................................... 4

System Features........................................... 5

Door Trigger ........................................... 5

Ignition Trigger ......................................... 5

IIP (Intelligent Ignition Protect) ........................... 5

Status LED ............................................. 6

SBS (Sector Bypass System) ............................... 6

GWA (Ground When Armed) ............................. 7

2-Stage Sensor Trigger ................................... 7

Light Flash ............................................. 7

Feature Programming ...................................... 8

Program Features Explained ................................ 9

Force Reset ............................................. 11

Troubleshooting .......................................... 13

Compatibility & Options ................................... 15

The VISION 1440 system control unit is backed by a limited lifetime

warranty against defective components and/or improper product assem-

bly to the original purchaser for as long the vehicle is owned by that

same purchaser, contingent upon installation by an Authorized VISION

Dealer. All product warranties become void if the VISION 1440 system

was not sold and installed by an Authorized VISION Dealer or the sys-

tem is moved to another vehicle. All other parts and/or accessories that

connect to VISION 1440 systems, including the shock sensor and status

LED, are warranted for one (1) year from the original date of purchase.

During the warranty period, Kiramek Inc. will repair or replace, at its

sole discretion, any system component that is found defective in mate-

rial or assembly during the warranty period, provided that the product

is returned to Kiramek Inc. by an Authorized VISION Dealer and is ac-

companied by a clear and legible copy of the original purchaser’s receipt.

Any damage to your VISION 1440 system that results from normal

wear-and-tear, accidents, improper use, neglect, faulty wiring, incorrect



number, alteration or repair outside Kiramek Inc or its Authorized VI-

SION Dealers immediately voids this warranty.

This warranty is limited to defective parts only and does not provide

any compensation whatsoever for damages associated with the VISION

1440 system or its accessories. This warranty does not cover installa-

tion labor, product removal and/or reinstallation fees. This warranty

is valid for the original purchaser only and may not be transferred to

another party. Kiramek Inc makes no warranty against theft or vandal-

ism of the vehicle in which the VISION 1440 system was installed. This

warranty shall not be interpreted as an insurance policy against loss,

             

otherwise.

WARNING! DO NOT ATTEMPT TO INSTALL THIS VISION 1440 PRODUCT YOUR-

SELF BECAUSE SUCH WILL IMMEDIATELY VOID THE WARRANTY. THIS SECU-

RITY SYSTEM MUST BE PROFESSIONALLY INSTALLED BY YOUR AUTHORIZED

VISION DEALER TO VALIDATE YOUR WARRANTY.

Limited Lifetime Warranty

VISION 1440B OWNER’S GUIDE

INCLUDED ITEMS

Control Module (1pc)

Mounting Bracket (1pc)

Primary Harness (1pc)

Secondary Harness (1pc)

Status LED (1pc) Shock Sensor (1pc)

Sensor Harness (1pc)

Window Decals (2pc)

2-Sided Tape (1pc) Backup Siren (1pc)

2 keys included

Guides (2pc)

1440B

VISION

IR SHOCK SENSOR

VISION 1440B OWNER’S GUIDE

System Operation

ARMING

DISARMING

Press the UNLOCK button on the vehicle’s factory

keyless remote. After you press Unlock, vehicle haz-



hazard lights stop, the siren will chirp 3 times and Status

LED will turn off. The system is now disarmed and you

may enter the vehicle.

LOCK

UNLOCK

TRUNK

(FACTORY REMOTE)

0USHå5.,/#+

"UTTON

LOCK-UNLOCK-LOCK: This is an alternate Sensor Bypass Arming

method. It’s especially convenient on Push Start cars, where turning the

ignition ON/OFF multiple times is troublesome. After running the engine

for more than 10s, turn off the ignition and within 10 seconds exit the vehicle

and Lock via keyless remote; then within 5s, Unlock; then within 5s, Lock

again. The 1440 will then be Armed with the shock sensor Bypassed.

NORMAL ARMING

This method is the typical way to arm the 1440,

with the shock sensor enabled. Ensure that all doors

are closed and then press the LOCK button on the vehi-

cle’s factory keyless remote. After you press Lock, vehicle



hazard lights stop, the siren will chirp 1 time and Status

LED will light solid for 5 seconds. After 5 seconds, the

-

tive. (No triggers are active during the initial 5 seconds.)

SENSOR BYPASS ARMING

This arming method allows you to disable the shock sensor

while keeping other alarm triggers active (e.g., door, trunk,

ignition). Run the engine for more than 10 sec., then turn the

ignition ON & OFF 3 times within 10 sec. You now have 10 sec. to

exit the vehicle, close all doors, and press the LOCK button on the vehicle’s





is now armed, and all triggers except shock are active.

LOCK

UNLOCK

TRUNK

(FACTORY REMOTE)

0USHå,/#+

"UTTON

System Operation

DISARMING TIPS

The 1440 determines when to disarm by watching the state of

the door lock motors and the hazard lights in conjunction with a

disarm button press on the vehicle’s keyless remote. If the siren

is going off when you disarm, the siren will continue going off for



Please consider that the following actions could trigger the siren when you

disarm:

• SIREN WILL GO OFF: If door is unlocked with the key instead of the

factory keyless remote.

• SIREN MAY GO OFF: If a door is opened too quickly after disarming



• SIREN MAY GO OFF: If a door is opened too quickly after disarming

while the siren is still chirping.

NOTE: There are some rare cases where the factory keyless signal may

drift and prevent disarming for a single session. In this case, simply lock

and then unlock again to disarm. The 1440 will then compensate for the

drift.

Press the TRUNK button on the vehicle’s factory

keyless remote (your factory remote may not have

this feature). The shock sensor, door and trunk trig-

gers will be bypassed and the trunk will then open. (The

Ignition switch trigger remains active, and doors remain

locked.) Five (5) seconds after you close the trunk, the

door, shock sensor, and trunk triggers will be automati-

cally re-activated.

TRUNK RELEASE

SYSTEM FEATURES

DOOR TRIGGER

The siren will blast for 30 seconds when the door is opened while the sys-

 (You may disarm

anytime with the vehicle’s factory remote.)

IIP (Intelligent Ignition Protect)

When you activate Remote Start Compatibility Mode,

the 1440 uses a feature called “IIP” to automatically

switch back to IG Protect Mode when needed.

Background. Most “remote start / turbo timer” compat-

ible car alarms bypass all trigger inputs when the ignition goes on (while

armed). If a thief opens the door the siren will go off, but the thief can then

close the door, turn on the ignition and wait. When the siren stops, he

can drive away in silence because the Ignition-ON state prevents the siren

from going off again! Yet other car alarms trigger the siren when the igni-

tion goes on (while armed), offering no remote start or turbo timer compat-

ibility. IIP solves this “compatibility versus security” problem.

IGNITION TRIGGER

IG PROTECT MODE (default)

The siren will blast for 30 seconds when the ignition switch is turned on

(You

may disarm anytime with the vehicle’s factory remote.)

REMOTE START COMPATIBILITY MODE (user-selectable)

When the ignition goes on while the system is armed, the

siren will not go off. Instead, shock sensor and ignition trig-

gers are bypassed, while door and trunk triggers remain active.

This allows a 3rd party remote start system to turn on the engine

without triggering the 1440’s siren. The 1440 is still protecting the vehicle,

so any attempt to open a door or the trunk will trigger the siren. And when

the remote starter shuts down (i.e., ignition is turned off), the shock sensor

and ignition triggers are automatically re-activated.

ON ST

OFF

VISION 1440B OWNER’S GUIDE

System FEATURES

How IIP Works. Normally, if the ignition is turned on while in Remote

Start Compatibility Mode, the system automatically bypasses the sen-

sor/ignition inputs but keeps door/trunk inputs active. However, if the 1440

was triggered before the ignition was turned on (via door/trunk/sensor), IIP

automatically switches back to IG Protect Mode and triggers the siren

when the ignition is turned on. The siren will blast for 30 sec. and repeat

up to 7 times while the ignition remains on.



acting as a visual theft deterrent. The LED turns off when the system is

disarmed.

TRIGGER MEMORY

       



to Table-1 below to show which vehicle sector triggered the siren.

This “Trigger Memory” will display on the Status LED until the

system is disarmed.

STATUS LED

TABLE-1 Trigger Memory Report via the Status LED

Status LED Flashes Sector That Triggered Siren

2Door or Trunk

6Ignition

7Sensor

When a vehicle sector is triggered repeatedly, the system will au-

tomatically bypass that sector until you disarm and arm again.

This feature is useful to prevent noise pollution caused by mul-

tiple siren triggers in a short period of time, such as when park-

ing near construction sites or when animals jump on the vehicle.

• Ignition Trigger Limit: 8 triggers

• Sensor Trigger Limit: 8 FULL triggers, 10 WARNING triggers (pg.7)

• Door Trigger Limit: 4 triggers

SBS (Sector Bypass System)

SYSTEM FEATURES

GWA (Ground When Armed)

The 1440 feeds a (–) Ground output while the system is armed. Optional

components can be added to this control line, such as a Starter Kill Im-

mobilizer Relay or vehicle lighting devices. When the system is disarmed,

power to this output is removed and all attached devices shutdown. See the

Installation Guide

LIGHT FLASH

       -

nection to the vehicle’s factory light control relay (see “Installation

Guide” page 9). For some vehicles, you may need to change the po-

larity with the purchase of an optional VISION 896H-1C relay.





(e.g., shock sensor 1st-stage trigger).

2-STAGE SENSOR TRIGGER

1st Stage (“Warning Chirps”). When the included shock sensor

detects a light impact to the vehicle body, the siren will chirp 5

times. Note that any optional sensors attached to the shock sen-

sor’s 1st Stage input can also trigger 5 warning chirps. No chirps

will be produced while in Sensor Bypass Mode.

2nd Stage (“Full Siren”). When the included shock sensor de-

tects hard impact on the vehicle body, the siren will go off for 30

seconds (or until disarmed with the factory remote). Note that

any optional sensors attached to the shock sensor’s 2nd Stage

input can also trigger the full siren blast sequence. The siren will not be

triggered while in Sensor Bypass Mode.

PAGER OUTPUT

This wire goes to (–) Ground for 15 seconds whenever the full siren blast is

triggered (not during Warning Chirps). It supplies up to 1-Amp to power

optional paging systems (not currently available from KIRAMEK) or other

devices you wish to turn on only when the siren is going off.

Inhaltsverzeichnis

Andere Kiramek Fernstartsystem Handbücher

Kiramek

Kiramek SCIBORG 825K Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Ozito

Ozito OJS-800 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Viper

Viper 4204 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch