Kitagawa MR160LAY11 Bedienungsanleitung

Originalinstructions

NC Rotary Table

INSTRUCTION MANUAL

Model：MR160LAY11

MA0580EHG2

・ This instruction manual is for production engineers and maintenance

personnel in charge of operation of this product. When a beginner uses

this product, receive instructions from experienced personnel, the

distributor or our company.

・ Before installing, operating or maintaining this equipment, carefully

read this manual and the safety labels attached to the equipment.

Failure to follow these instructions and safety precautions could result

in serious injury, death, or property damage.

・ Store this manual near equipment for future reference.

・ If any questions related to safety arise about this manual, please

confirm them with the distributor or our company.

DANGER

NOTICE

Thank you for choosing the Kitagawa NC Rotary Table.

Kitagawa，a world-renowned precision equipment manufacturer, has developed the finest

quality NC Rotary Table with emphasis in high precision and rigidity as its basic principals

in design.

This unit is installed on the machining centers and suitable for indexing the angle of

machining position of the workpieces. Please contact us if it is used for any other

applications.

This NC Rotary Table has been designed to provide years of high precision performance.

To ensure optimum and trouble-free performance, please read this operation manual

carefully before using the unit and retain this copy for your future reference.

Please pay close attention to the procedures with the following warning marks to avoid

severe injury and/or accident.

Safety Alert Symbol

This is the industry “ Safety Alert Symbol ”. This symbol is used to call your attention to

items or operations that could be dangerous to you or other persons using this equipment.

Please read these massages and follow these instructions carefully. It is essential that you

read the instructions and safety regulations before you attempt to assemble or use this

unit.

Indicates an Imminently hazardous situation which,

If not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

Instructions for table performance and avoiding

errors or mistakes.

DANGER

WARNING

CAUTION

EC DECLARATION OF CONFORMITY

We hereby declare that the following our product conforms with the essential health and

safety requirements of EC Directives.

Product : NC ROTARY TABLE

Type : MR Series, MRT Series ,GT Series, MX Series,

TMX Series, THX Series, TRX Series, TLX Series,

TBX Series, TUX Series, TR Series, TL Series,

TP Series, LR Series TM Series, TH Series,

TT Series, TW Series, DM Series

Directives : Machinery Directive 2006/42/EC

EMC Directive 2004/108/EC

The above product has been evaluated for conformity with above directives using the

following European standards.

Machinery Directive:

EN ISO 12100-1:2003+A1:2009, EN ISO 12100-2:2003+A1:2009,

EN ISO 14121-1:2007, EN 60204-1: 2006+A1:2009, others

EMC Directive:

Emissoion : EN 55011+A2:2007

Immunity : EN 61000-6-2:2005

CONTENTS

Page

1. For Your Safety ･････････････････････････････････・・・・・・･･･････・・・・・・・・・・ 1

2. Specifications ･･･････････････････････････････････････・・・・・・･････・・・・・・・・ 8

3. Accuracies ･･･････････････････････････････････････・・・・・・･････・・・・・・・・・・・ 10

4. Preparation ･･･････････････････････････････････････・・・・・・････・・・・・・・・・・・ 11

4-1. Installation

4-2. Lubrication

4-3. Required Oil Quantity

4-4. Recommended Lubricating Oil

4-5. Safety of Oil and Antirust Oil Used for the Unit

5. Inspection ･･･････････････････････････････････････････････・・・・・・・・・・・・・・・ 14

6. Use of NC Rotary Table ･･････････････････････････････・・・・・・・・・・・・・・・・・・ 14

7. Table Clamp and Unclamp ･･････････････････････････････････････････・・・・・ 15

7-1. General Instruction

7-2. Inlet Pressure for Table Clamp

7-3. Air purge

7-4. Confirmation of Clamp and Unclamp

7-5. Solenoid Valve for Clamp and Unclamp

8. Mounting the Workpiece ･･･････････････････････････････････････・・・・・・・・・ 18

9. Maintenance Work ･･････････････････････････････････････・・・・・・・・・・・・・・・ 19

9-1. Corrective Action in Case of Failure, and Disassembly

9-2. Before Performing Maintenance Work

10. Adjustment of Backlash between Worm Wheel and Worm Gear ･･･・・・・・・・ 20

10-1. Measuring the Backlash of the Worm Gear

10-2. Adjusting the Backlash of the Worm Gear

11. ZRN device ･･･････････････････････････････････････････････・・・・・・・・・・・・・・ 25

11-1. ZRN device on table

11-2. ZRN device Adjustment

11-3. Sensor Mechanism

12. Motor Cover ･･･････････････････････････････････････････････・・・・・・・・・・・・・ 27

12-1. Dismount

12-2. Waterproofing

13. Troubleshooting ･･････････････････････････････････････・・・・・・・・・・・・・･････ 29

14. Parts List ･････････････････････････････････････････････・・・・・・・・・・・・・・・・･･ 32

15. Storage ･･････････････････････････････････････････････････････・・・・・・・・・・・ 38

Page

16. Disposal of NC Rotary Table ･･･････････････････････････････・・・・・・・・・・・・・ 38

17. Indexing Accuracy and Pitch Error ･･･････････････････････････・・・・・・・・・・・ 39

18. Mounting Rotary Joint (Option) ･･････････････････････････････・・・・・・・・・・・ 40

18-1. Alignment of discharge opening face

18-2. Pining to supply part

Appendixes

Appendix 1 Outside View

Appendix 2 Wiring Diagram

Appendix 3 Details of Nameplate

1. For Your Safety

Basic Safety Tips

Please read this manual and follow instructions carefully.

We cannot assume responsibility for damage or accidents caused by misuse of the NC

Rotary indexing tables, through non-compliance with the safety instructions.

Turn off the main power of the machine prior to maintenance, check, or repair of

the unit, Failure to do so may cause severe injury and/or accident.

OFF

DANGER

Tighten the bolts securely when mounting the unit on the machine table.

Please refer to the chart below for the

recommended tightening torque of the bolts.

Hex. Bolt Size Torque N・m

M10 33.8

M12 58.9

M16 146.3

M20 294.3

Make sure the working area is clear of any foreign object and/or hand when the

unit is in operation to avoid any serious accident and/or injury.

Do not apply cutting force which exceeds the specification in this manual. Failure

to do so may cause severe injury and/or damage to the unit.

WARNING

Please consult your local distributor before attempting any modification of the

unit.

Maintain adequate clearance between the unit and any part of the machine.

Avoid bending the external cables and air tube of the unit.

NO!

WARNING

Use a support, steady rest, or tailstock for heavy or long workpieces to prevent

any injury and/or accident.

Workpiece

Steady Rest

Tailstock

WARNING

When transporting the unit, make sure to use eye bolts and a sufficient leash or

wire.

Mount or dismount the workpiece to or from the unit while the unit is clamped to

avoid damage to the internal mechanism and diminished indexing accuracy of

the unit.

Leash or Wire Eye bolt

PNEUMATIC

CAUTION

Inhaltsverzeichnis

Andere Kitagawa Industrieanlagen Handbücher

Kitagawa

Kitagawa BBT200 Bedienungsanleitung

Kitagawa

Kitagawa SR1146 Bedienungsanleitung

Kitagawa

Kitagawa BS300 Bedienungsanleitung

Kitagawa

Kitagawa TT182BM-22 Bedienungsanleitung

Kitagawa

Kitagawa GT Bedienungsanleitung

Kitagawa

Kitagawa TT150AE-04 Bedienungsanleitung

Kitagawa

Kitagawa BB200 Series Bedienungsanleitung

Kitagawa

Kitagawa IC Bedienungsanleitung

Kitagawa

Kitagawa NC Rotary Table Bedienungsanleitung

Kitagawa

Kitagawa AP-20 Bedienungsanleitung

Kitagawa

Kitagawa Y-RE Series Bedienungsanleitung

Kitagawa

Kitagawa PLS Series Bedienungsanleitung

Kitagawa

Kitagawa YW Series Bedienungsanleitung

Kitagawa

Kitagawa TP530 Bedienungsanleitung

Kitagawa

Kitagawa DL200 Bedienungsanleitung

Kitagawa

Kitagawa NPGT Bedienungsanleitung

Kitagawa

Kitagawa NPG3 Bedienungsanleitung

Kitagawa

Kitagawa S1036 Bedienungsanleitung

Kitagawa

Kitagawa SC Bedienungsanleitung

Kitagawa

Kitagawa BT200 Series Bedienungsanleitung

Kitagawa

Kitagawa MR250RAE13 Bedienungsanleitung

Kitagawa

Kitagawa BR Bedienungsanleitung

Kitagawa

Kitagawa NTS2 Bedienungsanleitung

Kitagawa

Kitagawa TW2180BRF5 Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung