KitchenAid 5K45SSN Bedienungsanleitung
Stand Mixer
5K45SSN,
5KSM150PSN, 5KSM195PSN
W11520569A.indb 1W11520569A.indb 1 6/17/2022 3:25:37 PM6/17/2022 3:25:37 PM
2
PARTS AND FEATURES
*Included with select models only. Also available as optional accessory.
**The Bowl design and material depend on the Stand Mixer model.
1
2
4
5
611
10
1Speed Control Lever
2Motor Head
3Attachment Hub
4Attachment Knob
5Motor Head Locking Lever
(not shown)
6Beater Shaft
7Beater Height Adjustment Screw
(not shown)
8Bowl Clamping Plate
9Bowl**
10 Pouring Shield*
11 2.8 L Stainless Steel Bowl*
12 Dough Hook
13 Wire Whip
14 Flex Edge Beater*
15 Flat Beater
12
13
14
15
8
9
3
7
W11520569A.indb 2W11520569A.indb 2 6/17/2022 3:25:45 PM6/17/2022 3:25:45 PM
ENGLISH
3
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions. Misuse of appliance may result in personal injury.
2. To protect against risk of electrical shock, do not put Stand Mixer in water or
other liquid.
3. This appliance is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
4. Turn the appliance off (0), then unplug from the outlet when not in use, before
assembling or disassembling parts and before cleaning. To unplug, grasp the
plug and pull from the outlet. Never pull from the power cord.
5. Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas
and other utensils away from beater during operation to reduce the risk of injury
to persons and/or damage to the Stand Mixer.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to
the nearest Authorised Service Facility for examination, repair, or electrical or
mechanical adjustment.
7. The use of attachments/accessories not recommended or sold by KitchenAid
may cause fire, electrical shock or injury.
8. Do not use the appliance outdoors.
9. Do not let the cord hang over edge of table or counter.
10. Remove Flat Beater, Wire Whip, or Dough Hook from Stand Mixer before
washing.
11. Children should be supervised to ensure that they do not play with the appliance.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid a hazard.
PRODUCT SAFETY
W11520569A.indb 3W11520569A.indb 3 6/17/2022 3:25:47 PM6/17/2022 3:25:47 PM
4
13. Never leave the appliance unattended while it is in operation.
14. To avoid product damage, do not use the Stand Mixer Bowls in areas of high
heat such as an oven, microwave, or on a stovetop.
15. Refer to the “Care and Cleaning” section for instructions on cleaning the
surfaces in contact with food.
16. Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
17. This appliance is intended to be used in household and similar applications such
as:
- staff kitchen areas in shops, offices, and other working environments;
- farmhouses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
ELECTRICAL REQUIREMENTS
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
Wattage:
300 W max.
For 5KSM125 - 5KSM200 Series
275 W max.
For 5K45, 5KSM45 - 5KSM100 Series
Voltage: 220-240 V
Frequency: 50-60 Hz
NOTE: If the plug does not fit in the
outlet, contact a qualified electrician.
Do not modify the plug in any way.
Do not use an adapter.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or service technician install an
outlet near the appliance.
PRODUCT SAFETY
W11520569A.indb 4W11520569A.indb 4 6/17/2022 3:25:49 PM6/17/2022 3:25:49 PM
ENGLISH
5
NOTE: The Speed Control Lever can be set between the speeds listed in the above
chart to obtain speeds 3, 5, 7, and 9 if a finer adjustment is required. Do not exceed
Speed 2 when preparing yeast doughs as this may cause damage to the Stand Mixer.
SPEED CONTROL GUIDE
SPEED ACTION ATTACHMENT DESCRIPTION
1Stir Flat Beater
Flex Edge Beater*
For slow stirring, combining, mashing,
starting all mixing procedures. Use to add
flour and dry ingredients to batter, and to
add liquids to dry ingredients. Do not use
Speed 1 to mix or knead yeast doughs.
2Slow
Mixing
Flat Beater
Flex Edge Beater*
Dough Hook
For slow mixing, mashing, faster stirring.
Use to mix and knead yeast doughs,
heavy batters and candies, start mashing
potatoes or other vegetables, cut
shortening into flour, and mix thin or
splashy batters.
4Mixing,
Beating Flat Beater
Flex Edge Beater*
Wire Whip
For mixing semi-heavy batters, such
as cookies. Use to combine sugar and
shortening and to add sugar to egg
whites for meringues. Medium speed for
cake mixes.
6Beating,
Creaming
For medium-fast beating (creaming) or
whipping. Use to finish mixing cake,
doughnut, and other batters. High speed
for cake mixes.
8
Fast
Beating,
Whipping Wire Whip
For whipping cream, egg whites, and
boiled frostings.
10 Fast
Whipping
For whipping small amounts of cream,
egg whites, or for final whipping of
mashed potatoes.
PRODUCT USAGE
ACCESSORY GUIDE
ACCESSORY USE TO MIX DESCRIPTION
Flat Beater
Flex Edge
Beater*
Normal to heavy
mixtures:
Cakes, creamed frostings, candies, cookies,
pie pastry, biscuits, meat loaf, mashed
potatoes.
Wire Whip Mixtures that need air
incorporated:
Eggs, egg whites, heavy cream,
boiled frostings, sponge cakes, mayonnaise,
some candies.
Dough Hook Mixing and kneading
yeast doughs: Breads, rolls, pizza dough, coffee cakes, buns.
*Included with select models only. Also available as optional accessory.
W11520569A.indb 5W11520569A.indb 5 6/17/2022 3:25:50 PM6/17/2022 3:25:50 PM
6
ATTACHING/REMOVING THE BOWL
PRODUCT USAGE
LIFTING/LOWERING THE MOTOR HEAD
NOTE: Motor Head should always be in lock position when using the Stand Mixer.
To attach Bowl: Turn speed control to
“0” (OFF). Unplug Stand Mixer.
1
To lift Motor Head: Push the locking
lever to the UNLOCK position and lift
the head. Once lifted, the lever will
automatically go back in LOCK position
to keep the head lifted.
1
Place Bowl on Bowl Clamping Plate. Turn
Bowl gently in clockwise direction.
3
Unlock and lift the Motor Head. Then,
lock*the head to keep it lifted.
2
To put down Motor Head: Push the
locking lever to UNLOCK and gently
bring the head down. The locking lever
will automatically go back in LOCK
position when the head is down. Before
mixing, test lock by attempting to raise
Motor Head.
2
To remove Bowl: Repeat steps 1 and 2.
Turn Bowl gently counterclockwise.
4
*Locking option is available on select models.
W11520569A.indb 6W11520569A.indb 6 6/17/2022 3:25:54 PM6/17/2022 3:25:54 PM
ENGLISH
7
PRODUCT USAGE
*Included with select models only. Also available as optional accessory.
ATTACHING/REMOVING THE FLAT BEATER, FLEX EDGE BEATER*,
WIRE WHIP, OR DOUGH HOOK
To attach accessory: Turn speed control
to “0” (OFF). Unplug Stand Mixer.
1
To remove accessory: Repeat steps 1
and 2. Press accessory upward as far as
possible and turn to the left. Then pull
accessory from the Beater Shaft.
4
Unlock and lift the Motor Head. Then,
lock** the head to keep it lifted.
2
Slip accessory onto Beater Shaft and
press upward as far as possible. Then,
turn accessory to the right, hooking
accessory over the pin on the shaft.
3
**Locking option is available on select models.
W11520569A.indb 7W11520569A.indb 7 6/17/2022 3:25:59 PM6/17/2022 3:25:59 PM
8
PRODUCT USAGE
PLACING/REMOVING THE POURING SHIELD*
*Included with select models only. Also available as an optional accessory.
BEATER TO BOWL CLEARANCE
Your Stand Mixer is adjusted at the factory so the Flat Beater just clears the bottom of
the Bowl. If, for any reason, the Flat Beater hits the bottom of the Bowl or is too far away
from the Bowl, you can correct clearance easily.
NOTE: When properly adjusted, the Flat Beater will not strike on the bottom or side of
the Bowl. If the Flat Beater or the Wire Whip is so close that it strikes the bottom of the
Bowl, coating may wear off the beater or wires on whip may wear.
Turn speed control to “0” (OFF). Unplug
Stand Mixer.
1
To place Pouring Shield*: Turn speed
control to “0” (OFF). Unplug Stand Mixer.
Attach your chosen accessory. See the
“Attaching/Removing the Flat Beater,
Wire Whip, or Dough Hook” section.
1
Lift Motor Head. Turn screw slightly
counterclockwise (left) to raise Flat
Beater or clockwise (right) to lower Flat
Beater. Make adjustment with Flat Beater,
so it just clears surface of Bowl. If you
overadjust the screw, the Bowl lock lever
may not lock into place.
2
From the front of the Stand Mixer, slide
the Pouring Shield* over the Bowl until
the shield is centred. The bottom rim of
the shield should fit within the Bowl.
2
W11520569A.indb 8W11520569A.indb 8 6/17/2022 3:26:02 PM6/17/2022 3:26:02 PM
ENGLISH
9
PRODUCT USAGE
USING THE POURING SHIELD*
Use the Pouring Shield* to avoid having ingredients splashing out of the Bowl when
mixing, as well as to easily pour ingredients in the Bowl while mixing.
*Included with select models only. Also available as an optional accessory.
To remove Pouring Shield*: Turn speed
control to “0” (OFF). Unplug Stand Mixer.
3
Lift the front of the Pouring Shield* clear
of the Bowl rim and pull forward. Remove
attachment and Bowl.
4
For best results, rotate the shield so the
Motor Head covers the U-shaped gap in
the shield. The pouring chute will be just
to the right of the Attachment Hub asyou
face the Stand Mixer.
1
Pour the ingredients into the Bowl
through the pouring chute.
2
W11520569A.indb 9W11520569A.indb 9 6/17/2022 3:26:04 PM6/17/2022 3:26:04 PM
10
PRODUCT USAGE
OPTIONAL ATTACHMENTS
KitchenAid offers a wide range of optional attachments such as food grinders or
pasta makers. They may be attached to the Stand Mixer attachment power shaft,
as shown here.
OPERATING THE SPEED CONTROL
NOTE: The Stand Mixer may warm up during use. Under heavy loads with extended
mixing time, the top of the unit may become hot. This is normal.
Plug Stand Mixer into proper electrical
outlet. Always set Speed Control Lever
on lowest speed to start, then gradually
increase speed to avoid splashing
ingredients. See “Speed Control Guide”
chart.
1
To attach: Turn speed control to
“0” (OFF). Unplug Stand Mixer.
1
Do not scrape Bowl while Stand Mixer
is operating. The Bowl and beater are
designed to provide thorough mixing
without frequent scraping. Scraping
the Bowl once or twice during mixing is
usually sufficient.
2
Loosen Attachment Knob by turning it
counterclockwise. Remove Attachment
Hub cover.
2
W11520569A.indb 10W11520569A.indb 10 6/17/2022 3:26:08 PM6/17/2022 3:26:08 PM
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Sprachen:
Andere KitchenAid Mischer Handbücher
KitchenAid
KitchenAid 5KSM150PSP Series Bedienungsanleitung
KitchenAid
KitchenAid KF26M22CA Montageanleitung
KitchenAid
KitchenAid 5KSM7591X Bedienungsanleitung
KitchenAid
KitchenAid KSMc50 Bedienungsanleitung
KitchenAid
KitchenAid KSM7586PCA Bedienungsanleitung
KitchenAid
KitchenAid 9708308B Bedienungsanleitung
KitchenAid
KitchenAid 9KSM160FGA Bedienungsanleitung
KitchenAid
KitchenAid KP26M1X - Professional 600 Series Stand Mixer 575... Bedienungsanleitung
KitchenAid
KitchenAid 5K45SSC Bedienungsanleitung
KitchenAid
KitchenAid KG25H0XER5 Kurzanleitung
KitchenAid
KitchenAid KP26M1XPM - Mixer 6QT, Pearl Metallic Bedienungsanleitung
KitchenAid
KitchenAid 5K45SS Bedienungsanleitung
KitchenAid
KitchenAid KP26M1XBR5 Bedienungsanleitung
KitchenAid
KitchenAid KSM180LELB Bedienungsanleitung
KitchenAid
KitchenAid KHM53ER Bedienungsanleitung
KitchenAid
KitchenAid KSM55 Bedienungsanleitung
KitchenAid
KitchenAid 5KSM180LE Bedienungsanleitung
KitchenAid
KitchenAid 5KSM7580X Bedienungsanleitung
KitchenAid
KitchenAid KSM7990 Bedienungsanleitung
KitchenAid
KitchenAid 5KSM150PS Bedienungsanleitung
