KitchenAid Pro 600 KEC50C Series Bedienungsanleitung

Stand Mixer

Pro 600 5.7 L - KEC50C

Pro Line 6.9 L - KEC97A

W11395148A.indb 1 10/3/2019 4:32:02 PM

PARTS AND FEATURES

* Style may vary depending on model.

** Accessory only included for Stand Mixer Pro Line (KEC97A). Not included for Stand Mixer

Pro 600 (KEC50C).

*** Capacity and handle design vary by model.

****Accessory not included for both models.

1Motor Head

2Attachment Hub (see the “Optional

Attachments” section)

3Attachment Knob

4Bowl Lift Lever (not shown)

5Beater Shaft

6Flex Edge Beater****

7Wire Whip*

8Flat Beater*

9Pouring Shield**

10 Spiral Dough Hook*

11 Stainless Steel Bowl***

12 Locating Pins

13 Bowl Support

14 Beater Height Adjustment Screw

15 Speed Control Lever

W11395148A.indb 2 10/3/2019 4:32:03 PM

ENGLISH

PRODUCT SAFETY

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be

followed, including the following:

1. Read all instructions. Misuse of appliance may result in personal injury.

2. To protect against the risk of electrical shock do not put Stand Mixer in water or

other liquid.

3. This appliance is not intended for use by persons, (including children), with

reduced physical, sensory, or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instructions concerning

use of the appliance by a person responsible for their safety.

4. Children should be supervised to ensure that they do not play with the

appliance.

5. If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent, or similarly qualied persons in order to avoid a hazard.

6. Never leave the appliance unattended while it is in operation.

7. Unplug from outlet when not in use, before putting on or taking off parts, and

before cleaning.

8. Avoid contacting moving parts. Keep hands, hair, and clothing, as well as

spatulas and other utensils away from accessories during operation to reduce

the risk of injury to persons and/or damage to the appliance.

9. Do not operate any appliance with a damaged cord or plug or after the

appliance malfunctions, or is dropped or damaged in any manner. Contact the

manufacturer at their customer service telephone number for information on

examination, repair or adjustment.

10. The use of attachments not recommended or sold by KitchenAid may cause re,

electric shock, or injury.

11. Do not use the Stand Mixer outdoors.

W11395148A.indb 3 10/3/2019 4:32:03 PM

12. Do not let the cord hang over edge of table or counter.

13. Remove at beater, wire whip, or dough hook from Stand Mixer before washing.

14. To avoid product damage, do not use the Stand Mixer bowls in areas of high

heat such as an oven, microwave, or on a stovetop.

15. Do not use the Stand Mixer on or next to an electric or gas oven, or put it inside

of a warm oven.

16. Do not use the Stand Mixer for anything other than its intended function as

specied in this manual.

17. Do not use toxic products (alcohol, ammonia, stain removers, etc.) or steel

sponges to clean the Stand Mixer. These products may damage the Stand Mixer

or leave undesirable odors.

18. Refer to the “Care and Cleaning” section for instructions on cleaning the

surfaces in contact with food.

19. This appliance is intended to be used in household and similar applications such

as:

- staff kitchen areas in shops, ofces or other working environments;

- farmhouses;

- by clients in hotels, motels and other residential type environments;

- bed and breakfast type environments.

PRODUCT SAFETY

SAVE THESE INSTRUCTIONS

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard

Plug into an earthed outlet.

Do not remove earth prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these

instructions can result in

death, fire, or electrical shock.

KEC97A3S Series, KEC50CVP Series

Volts: 220 V

Hertz: 60 Hz

Wattage: 500 W

KEC97A3A Series, KEC50CVA Series

Volts: 127 V

Hertz: 60 Hz

Wattage: 500 W

NOTE: Use an appropriate outlet to plug

in your Stand Mixer. If the plug does

not fit in the outlet, contact a qualified

electrician. Do not modify the plug in any

way. Do not use adapters or T’s.

Do not use an extension cord. If the

power supply cord is too short, have a

qualified electrician or service technician

install an outlet near the appliance.

W11395148A.indb 4 10/3/2019 4:32:03 PM

ENGLISH

PRODUCT SAFETY

Electrical Shock Hazard

Plug into an earthed outlet.

Do not remove earth prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these

instructions can result in

death, fire, or electrical shock.

Residence mains:

The mains wires must be of copper with

a minimum cross-section per ABNT

(NBR-5410.)

To protect this appliance and the mains

against overloading, this appliance must be

connected to a circuit that is protected with

a thermomagnetic circuit breaker.

If the household circuit does not include

a circuit breaker, contact an electrician to

have one installed.

Electric outlet:

For your safety and to avoid damage to

your product, it is very important that your

product is earthed correctly.

Your appliance power cord features a

hexagon-shaped plug, 10A, per ABNT

(NBR 14136).

Your residence electrical installation must

have a suitable electric outlet for this type

of plug. If not, it is your responsibility to

have one installed by a qualiﬁed electrician.

Use appropriate outlet type for your

appliance plug, as shown below:

Before operating this

appliance, make sure

the main voltage at

the installation site is

the same as indicated

on product technical

data label.

This information is also included on the

label attached to your appliance’s cord

near the plug.

IMPORTANT:

• If it is necessary to convert your 127V

appliance to 220V, use a 1.0 KVA

stabiliser.

• If it is necessary to convert your 220V

appliance to 127V, use a 1.0 KVA

stabiliser.

• Never plug your

appliance into

multiplug adapters

with another

appliance in the same

socket. Do not use an

extension cord. This

type of connection may cause electrical

overload in the mains, and can damage

the appliance and could cause a ﬁre. The

appliance should be plugged into its

own outlet.

• In case of oscillation in mains voltage,

install an automatic voltage stabiliser

with minimum rating of 1500 Watts

between the appliance and the socket.

• If the cord of this appliance is damaged,

it must be replaced. Contact your

nearest authorised KitchenAid Customer

Care Centre.

W11395148A.indb 5 10/3/2019 4:32:04 PM

NOTE: Use Speed 2 to mix or knead yeast doughs. Use of any other speed creates high

potential for Stand Mixer failure. The dough hook efficiently kneads most yeast dough

within 4 minutes.

Speed Attachment Action Description

Flat Beater,

Flex Edge

Beater Stirring

For slow stirring, combining, mashing,

starting all mixing procedures. Use to add

ﬂour and dry ingredients to batter, and to

add liquids to dry ingredients. Do not use

Speed 1 to mix or knead yeast doughs.

Flat Beater,

Flex Edge

Beater, Spiral

Dough Hook

Slow Mixing,

Kneading

For slow mixing, mashing, faster stirring.

Use to mix and knead yeast doughs,

heavy batters and candies, start mashing

potatoes or other vegetables, cut

shortening into flour, and mix thin or

splashy batters.

Flat Beater,

Flex Edge

Beater, Wire

Whip

Mixing, Beating

For mixing semi-heavy batters, such

as cookies. Use to combine sugar and

shortening and to add sugar to egg whites

for meringues. Medium speed for cake

mixes.

Flat Beater,

Flex Edge

Beater, Wire

Whip

Beating,

Creaming.

For medium-fast beating (creaming)

or whipping. Use to ﬁnish mixing cake,

doughnut, and other batters. High

speed for cake mixes.

8-10 Wire Whip Fast Beating,

Whipping, Fast

Whipping

For whipping cream, egg whites, and

boiled frostings. For whipping small

amounts of cream, egg whites or for ﬁnal

whipping of mashed potatoes.

SPEED CONTROL GUIDE

W11395148A.indb 6 10/3/2019 4:32:04 PM

ENGLISH

PRODUCT ASSEMBLY

Place bowl lift lever in down position.

Turn the speed control to “0” (OFF).

Unplug the Stand Mixer.

To attach the Bowl: Fit the bowl supports

over locating pins and press down on back

of the bowl until bowl pin snaps into spring

latch.

To attach the accessory: Slip the

accessory onto the shaft. Turn to hook it

over the pin on the shaft.

Locating Pin

Spring Latch

To raise the Bowl: Rotate the bowl lift

lever to the straight up position. The bowl

must always be in the raised position when

mixing.

5IMPORTANT: If the bowl is not securely

snapped into place, it will be unstable and

wobble during use.

W11395148A.indb 7 10/3/2019 4:32:05 PM

IMPORTANT: When properly adjusted, the flat beater will not strike on the bottom or

side of the bowl. If the flat beater or the wire whip is so close that it strikes the bottom

of the bowl, the coating may wear off the flat beater (for coated beaters) or wires on

the wire whip may wear.

Test the beater to bowl clearance: Plug

the Stand Mixer into a grounded 3 prong

outlet. Turn Stand Mixer ON and test

each speed, making sure the beater does

not touch the bowl during operation.

If the beater is too far away from the

bottom or is hitting the bowl, proceed to

next step to make adjustments.

(OPTIONAL): To adjust beater to

bowl clearance: Lower the bowl to the

down position. Turn the screw slightly

counterclockwise (left) to raise the beater,

or clockwise (right) to lower it. Adjust the

beater so that it just clears the surface of

the bowl. Check again the clearance of

the beater to the bowl.

Raise Bowl Lower Bowl

PRODUCT ASSEMBLY

WARNING

Electrical Shock Hazard

Plug into an earthed outlet.

Do not remove an earth prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, re,

or electrical shock.

W11395148A.indb 8 10/3/2019 4:32:05 PM

ENGLISH

USING THE POURING SHIELD*

Use the pouring shield to avoid having ingredients splashing out of the bowl when

mixing, as well as to easily pour ingredients into the bowl while mixing.

*Accessory only included for Stand Mixer Pro Line (KEC97A). Not included for Stand Mixer

Pro 600 (KEC50C).

Do not scrape the bowl while operating.

Scraping the bowl once or twice during

mixing is usually sufﬁcient.

Plug the Stand Mixer into a proper eletrical

outlet. Start with lower speed to avoid

splashing and increase it gradually. Refer to

the “Speed Control Guide”.

Pour the ingredients into the bowl through

the pouring chute.

To attach the Pouring Shield*: Slide

the pouring shield from the front of the

Stand Mixer over the bowl. The bottom

rim of the pouring shield* fits inside of

the bowl.

PRODUCT USAGE

W11395148A.indb 9 10/3/2019 4:32:05 PM

OPTIONAL ATTACHMENTS

KitchenAid offers a wide range of optional attachments such as Food Grinders or Pasta

Makers. They may be attached to the Stand Mixer attachment power shaft, as shown

here.

NOTE: See the Use and Care Guide of each specific attachment for recommended

speed settings and operating times.

Flip up hinged attachment hub cover to

open.

Turn the speed control to “0” (OFF).

Unplug the Stand Mixer.

Insert attachment into attachment hub,

making certain that attachment power

shaft ﬁts into the square attachment hub

socket.

Tighten attachment knob by turning it

clockwise until the attachment is secured

to the Stand Mixer.

To remove: Turn speed control to “0”

(OFF) and then unplug the Stand Mixer.

Loosen attachment knob by turning it

counterclockwise. Rotate attachment

slightly back and forth while pulling it out.

PRODUCT USAGE

W11395148A.indb 10 10/3/2019 4:32:06 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere KitchenAid Mischer Handbücher

KitchenAid

KitchenAid K45 Bedienungsanleitung

KitchenAid

KitchenAid K5-A Bedienungsanleitung

KitchenAid

KitchenAid KHM926WH Bedienungsanleitung

KitchenAid

KitchenAid KSM150PS - Artisan Series Mixer Bedienungsanleitung

KitchenAid

KitchenAid KSM2CB5 Bedienungsanleitung

KitchenAid

KitchenAid 4KSMC50S Kurzanleitung

KitchenAid

KitchenAid 5KSM7990X Bedienungsanleitung

KitchenAid

KitchenAid KP2671XAC - Professional Stand Mixer Kurzanleitung

KitchenAid

KitchenAid Professional 600 Series Kurzanleitung

KitchenAid

KitchenAid 5KSM7580X Bedienungsanleitung

KitchenAid

KitchenAid KSM150PSER Bedienungsanleitung

KitchenAid

KitchenAid KSM150PSLV0 Bedienungsanleitung

KitchenAid

KitchenAid 5KSM3311 Bedienungsanleitung

KitchenAid

KitchenAid KSM150PSBK0 Bedienungsanleitung

KitchenAid

KitchenAid 5K45SSC Bedienungsanleitung

KitchenAid

KitchenAid K4SS Betriebsanleitung

KitchenAid

KitchenAid KSM90PS - Ultra Power Stand Mixer Bedienungsanleitung

KitchenAid

KitchenAid KP26M1XCE5 Kurzanleitung

KitchenAid

KitchenAid KPM50 GR Bedienungsanleitung

KitchenAid

KitchenAid K45A Bedienungsanleitung

KitchenAid

KitchenAid KSM75 Bedienungsanleitung

KitchenAid

KitchenAid KSM158GBCA - 90th Anniversary Limited-Edition Stand... Bedienungsanleitung

KitchenAid

KitchenAid KP26M1X - Professional 600 Series Stand Mixer 575... Bedienungsanleitung

KitchenAid

KitchenAid KP26M1XBR5 Bedienungsanleitung

Beliebte Mischer Handbücher anderer Marken

Bosch

Bosch GRW 9 Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman WM45E Leitfaden

Jay-Lor

Jay-Lor 5050 Bedienungsanleitung

Sunbeam

Sunbeam FPSBSM210X Bedienungsanleitung

Thinky

Thinky ARE-250 Bedienungsanleitung

Midas

Midas XL4 Bedienungsanleitung

bianco

bianco PURO 4 Bedienungsanleitung

Paso

Paso DAG9200 Bedienungsanleitung

Sima

Sima SFX-9A Bedienungsanleitung

better chef

better chef IM-815WC Montageanleitung

ALLEN & HEATH

ALLEN & HEATH GR1 Bedienungsanleitung

Lacor

Lacor 69083 Technisches Datenblatt

Buffalo

Buffalo CP921 Bedienungsanleitung

Pentair

Pentair HYPRO Cleanload 3376-0870 Betriebsanleitung

Cuisinart

Cuisinart SM50WHE Bedienungsanleitung

Hobart

Hobart HCM-300 Bedienungsanleitung

Kenwood

Kenwood Chef KM400 series Bedienungsanleitung

Ferax

Ferax BCM-1350 Bedienungsanleitung