Kitsound DIGGIT XL Bedienungsanleitung

USER MANUAL

DIGGIT XL

BLUETOOTH®

OUTDOOR

SPEAKER

JB. 6716-a / REG02 / KSDIGXL / Made in China.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such

marks by Kondor Ltd. is under license. Other trademarks and trade names are those of their respective owners.

All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use

does not imply that the trademark owner is aliated with KitSound or endorses the products herein.

Products showing the ‘Crossed Through’ wheelie bin symbol must be recycled separately from household waste at the

end of their useful life. Please DO NOT dispose of this appliance in normal household waste. Your local appliance retailer

may operate a ‘take-back’ scheme when you are ready to purchase a replacement product, alternatively contact your

local government authority for further help and advice on where to take your appliance for recycling.

Please recycle this packaging responsibly.

kitsound.co.uk

2 3

Please read this manual carefully before use.

Warning

• Please do not get the product wet. If your product is IP rated, please follow guidelines on how to safely

use your product overleaf.

• Please don’t take the product apart. There are no user serviceable parts inside

• Please don’t modify or alter the product or accessories

• Please don’t expose the product to extreme temperatures or rapid changes of hot to cold or vice versa

• Please don’t use damaged cables or plugs, or loose electrical sockets

• Please don’t touch the device, cables, plugs, or the electrical socket with wet hands or other wet body parts

• Please don’t pull the cable excessively when disconnecting it if the cable is not xed

• Please don’t bend or damage the cable

• Please don’t drop or cause an impact to the product or the device

• Please don’t place naked ame sources, such as lighted candles, on the product

Battery Information

• Batteries may malfunction if they are not used for extended periods

• Over time, unused devices will discharge and must be recharged before use

• Disconnect the charger from power sources when not in use

• Use the batteries only for their intended purposes

• Follow all instructions in this manual to ensure the longest lifespan of your device and battery.

Damages or poor performance caused by failure to follow warnings and instructions can void your

manufacturer’s warranty

• Attention should be drawn to the environment aspect of battery disposal

• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as re

or the like

4 5

Box contents

• KitSound Diggit XL

• Micro USB charge cable

• User manual

• Stake

• Stake tube

Functions

1. MFB (Multi-Function Button)

2. Volume+/Next Track

3. Volume-/Previous Track

4. Multi-Pair Button

5. Micro USB Charge Port

6. Aux in

7. Stake

8. LED Light Indicator

9. Stake Tube

IP66

This speaker is rated IP66. The rst 6 means that the KS Diggit XL is protected against dust and contact.

The second 6 means it protects from water jets from any direction, but is not impervious to large

amounts of water. Please do not directly immerse in water.

• To ensure that the KS Diggit XL is water resistant, please remove all cable connections and tightly

close the AUX/DC IN cap. Exposing the KS Diggit XL to liquids without doing so may result in

permanent damage to the speaker

• Do not expose the KS Diggit XL to water while charging. This is very dangerous as doing so may result

in personal injury and permanent damage to the speaker or power source

• IP66 rating is dened as the KS Diggit XL can withstand water spray (water-carrying capacity 100 L/min)

for up to 3 minutes

• We do not recommend leaving the KS Diggit XL outside at night in wet conditions or when it’s raining.

Store in a dry place while not in use, this will prolong the speaker’s life

1 2 3

6 7

Instructions for use

Getting started

Charging the battery

Give the speaker a full charge before its rst use

1. Connect the supplied USB charging cable to the Micro USB Charging Port (5) and plug into power

2. The LED Indicator (8) will slowly ash red whilst charging which will take up to 4 hours

3. Once fully charged the LED Indicator (8) will turn o

Note: Allow up to 12 hours for the rst charge. You can play your speaker whilst it is being charged,

but this will aect the charging time.

Battery protection mode

• If you haven’t used the speaker for 90 days, the speaker will switch to battery protection mode automatically.

To cancel the battery protection mode, connect the Diggit XL to power as per Step 1 under ‘Charging

the battery’

• To keep the rechargeable battery in good condition, please discharge and recharge speaker every

3 months, whether used during this time or not

Note: For best sound quality when the battery is below 30%, it is best to charge the Diggit XL

Pairing the Diggit XL to your device

1. Long press MFB (1) to turn the speaker on and it will automatically enter pairing mode and the

LED Indicator (8) will slowly ash white

2. Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices

3. Select KS Diggit XL. If asked for a passcode, enter ‘0000’, and the device will pair

4. Once connected an audio tone will sound and the LED Indicator (8) will be solid white

Re-pairing or pairing new devices

1. Turn Bluetooth connectivity o on any previously paired devices

2. Double tap the MFB (1) to re-enter pairing mode

3. Follow the ‘Pairing the Diggit XL to your device’ instructions

Note: If a previously paired device is not present within the Bluetooth connectivity range then the

speaker will re-enter pairing mode.

8 9

Playing music on your speaker

Bluetooth

When connected via Bluetooth, play music on your device and the sound will play through the speaker.

Some devices may require you to select the audio output.

Auxiliary

1. Plug the Aux cable into the speaker’s Aux-in Port (6) and your device using the supplied cable

2. The LED Indicator (8) will be solid white

Once connected to the Diggit XL either wired or by Bluetooth, please follow the instructions on next page:

Function Bluetooth mode Auxiliary mode

Volume+ Short press 2 Short press 2

Volume– Short press 3 Short press 3

Next Track Long press 2 Use controls on your device

Previous Track Long press 3 Use controls on your device

Play/Pause Track Short press 1 Use controls on your device

Turn O/On Long press 1 Long press 1

Please note

Your device will have an internal amplier and if it is playing digital les like MP3s. It will also have an

integrated DAC (Digital Audio Converter). If you turn the volume up to 100%, your device will be sending

a distorted signal. To avoid this, and to get the best quality from the speaker, we recommend that you do

not run your device any higher than 95% volume. Some devices output higher than others, so you may

need to reduce the volume if you experience distortion.

10 11

[...continued] Bluetooth Multi-Pairing

To break pairing

1. To remove a speaker from the Multi-Pair chain, short press Multi-Pair Button (4) on any of the

additional speakers you want to disconnect

Note: Once a Multi-Pair connection is made, the Diggit XLs will nd each other automatically when

turned on again.

Note: We recommend that the following factory reset is performed on any Diggit XL that has been used

as an additional speaker within a multi-pairing chain, if you intend to use the same speaker again

individually or as a “master” speaker in a new multi-pairing chain.

To factory reset a Diggit XL speaker

To factory reset any of the Diggit XLs and break its Bluetooth connection, long press the MFB (1) and

Multi-Pair Button (4) together for 10 seconds. The “master” Diggit XL will then re-enter pairing mode and

the LED Indicator (8) will ash white.

[continued...]

Bluetooth Multi-Pairing

1. Follow the normal instructions on ‘Pairing the Diggit XL to your device’ to pair your device to a Diggit XL.

This Diggit XL will act as the “master” speaker. This connection must be made before attempting to

Multi-Pair more speakers

2. Turn on any additional speakers you wish to use for Multi-Pairing by long pressing the MFB (1). All the

additional speakers will now automatically enter pairing mode

3. Short press the Multi-Pair Button (4) on the initial “master” speaker. The LED Indicator (8) on this

speaker will now ash pink

4. Short press the Multi-Pair Button (4) on each additional speaker and their LED Indicators (8) will also

ash pink

5. The Diggit XLs will now begin Multi-Pairing. The LED Indicator (8) on each additional speaker will turn

solid white to show they are all connected properly. The “master” speaker’s LED Indicator (8) will ash

pink for a couple of minutes to ensure it nds every speaker

6. The audio will now play through every speaker, giving you an immersive sound experience

As soon as all speakers have been found, the “master” speaker’s LED Indicator (8) will turn solid pink to

show that all possible connections have been made. The solid pink noties what speaker is now the

master. Each additional speaker will remain solid white when connected.

Note: Multi-Pair will not work when using the aux cable. The Diggit XL must be in Bluetooth mode.

12 13

Figure 2

Figure 1

Figure 3

Using the Stake

The Diggit XL Outdoor Bluetooth Speaker’s removable stake means that it can be used at all sorts of outdoor

locations without muing sound, such as the beach, picnics, BBQs, festivals, garden parties, camping, and more!

How to safely apply and use the removable stake

1. Pull the Stake (7) out of the Stake Tube (9)

2. Turn the Stake (7) 180 degrees and push back into the Stake Tube (9) (see gure 1)

3. Push the assembled stake into the ground. Please ensure that you do this safely and carefully and ensure

that the stake is only pushed in by hand. (see gure 2). DO NOT use any objects or the Diggit XL itself to

hit it into the ground

4. Make sure the bottom of the speaker is a sucient distance from the ground to allow easy and safe

removal. DO NOT push the entire stake into the ground

5. Carefully place the Diggit XL onto the Stake Tube (9) (see gure 3)

How to safely extract and store the removable stake

1. When you have nished using the Diggit XL, carefully remove the Speaker from the Stake Tube (9)

2. Grab the lower end of the Stake Tube (9) and the exposed part of the Stake (7) and carefully pull out of

the ground. DO NOT wiggle the stake or apply undue pressure when removing to prevent damage to

the product

3. If the Stake Tube (9) or Stake (7) has dirt on it, clean with a damp cloth before returning the Stake (7)

into the Stake Tube (9) for safe keeping Note: Only apply the stake into ground suitable for use, such as soft grass, sand, or snow.

14 15

Specications

Bluetooth®technology v5.0

Bluetooth connectivity distance up to 30 m

Bluetooth Frequency 2402 – 2480 MHz

Transmission power 8 dBm (conducted)

Frequency response 60 Hz – 20 kHz

Drivers 2 x 45 mm

Output RMS 2 x 15 W

Battery Li-ion

Play time up to 24 hours

Charging time up to 4 hours

IP rating IP66

Working temperature 40°C ~ -10°C

Dimensions (mm) H193 x W81 xD81 mm

Weight 614 g

Troubleshooting

We hope you’ve now got all the information you need to get started, but if you’re having problems

with anything, please feel free to contact us at: suppor[email protected].uk

‘Hereby, Kondor Ltd declares that the radio equipment type, KSDIGXL , is in compliance

with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following

internet address: http://kondor.co.uk/product-documents.’

16 17

US Responsible Party Information:

Stampede Presentation Products

55 Woodridge Dr

Amherst, NY 14228

800-398-5652

Logistics@Stampedeglobal.com

IC: 23562 – KSDIGXL

This device complies contains licence-exempt transmitter/receiver that comply with Innovation Science

and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two

conditions: (1) This device may not cause interference; and (2) This device must accept any interference,

including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR

d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts

de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire

de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

FCC ID: 2ADFF- KSDIGXL

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Warning: Changes or modications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

18 19

We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product

improvement and development.

The use and operation of this product is beyond our control. Warranty of the KSDIGXL is limited to defects caused by faulty manufacture

or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances.

This does not aect your statutory rights.

Please do not attempt to open this product. There are no user serviceable parts inside. If your product has an embedded, non-

replaceable battery, do not attempt to access or remove the battery. This may cause personal injury and will damage the product.

Making any attempt to open the product or carry out repair voids any and all warranties.

Inhaltsverzeichnis

Andere Kitsound Sprecher Handbücher

Kitsound

Kitsound Hive Discovery Bedienungsanleitung

Kitsound

Kitsound GLOW Bedienungsanleitung

Kitsound

Kitsound BOOMBAR Bedienungsanleitung

Kitsound

Kitsound BOXI MINI Bedienungsanleitung

Kitsound

Kitsound Hive 2 Bedienungsanleitung

Kitsound

Kitsound BOOGIE BUDDY Bedienungsanleitung

Kitsound

Kitsound BOOMBAR 2 Bedienungsanleitung

Kitsound

Kitsound POCKETBOOM XB Bedienungsanleitung

Kitsound

Kitsound SLAM 70 Bedienungsanleitung

Kitsound

Kitsound SOUL 2 Bedienungsanleitung

Kitsound

Kitsound KS SLAM XL Bedienungsanleitung

Kitsound

Kitsound SLAM 2 Bedienungsanleitung

Kitsound

Kitsound HIVE Bedienungsanleitung

Kitsound

Kitsound CUBE Bedienungsanleitung

Kitsound

Kitsound BoomBar+ Bedienungsanleitung

Kitsound

Kitsound Hive2o Bedienungsanleitung

Kitsound

Kitsound KS DIGGIT Bedienungsanleitung

Kitsound

Kitsound Sonar Bedienungsanleitung

Kitsound

Kitsound CADET Bedienungsanleitung

Kitsound

Kitsound HIVE X Bedienungsanleitung

Kitsound

Kitsound DANCEFLOOR Bedienungsanleitung

Kitsound

Kitsound UPSTAGE Bedienungsanleitung

Kitsound

Kitsound HIVE 2 Bedienungsanleitung

Kitsound

Kitsound SLAM Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung