Kleton PC939 Bedienungsanleitung
Instruction Manual
PC939
Polypropylene and Polyester
Strapping Tensioner
Windlass
Cutter
Base Handle
Tightening Handle
Gripper Plate
1. Threading tensioner
• Wrap both ends of strapping around
product.
• Squeeze handle and base together.
• Insert the shorter end of strapping under
the gripper plate and cutter wheel
leaving approximately 5” of strapping off
the front end.
• Release handle and base.
• Feed the other end through the cutter
wheel and up through the windlass.
• Put strapping as tight as possible.
2. Tensioning
• Move tightening handle forward and
back to begin tensioning.
• Continue back and forth motion until
strapping has reached desired tension.
3. Placing the seal
• Seal should be placed open side down
on top of the ends of strapping.
4. Sealing
• Close nose of sealer around seal.
• Crimp tightly around strapping.
5. Removing excess
• Squeeze handle and base together to
cut strapping.
• Slide tool off to the right.
Maintenance
Tools do need to be cleaned and maintained
periodically with a steel brush or dry com-
pressed air. Lubricate all moving parts with
light machine oil.
PC939 INSTRUCTIONS
How to use a polypropylene & polyester strapping tensioner
Part
No.
Order
No. Description Qty.
1PC960 Base 1
2PC960 Small bushing (base) 1
3PC960 Big bushing (base) 1
4PC960 Small leg bushing 1
5PC960 Big leg bushing 1
6PC960 Base plug 1
7PC966 Base toggle spring 1
9PC967 Screw 4
10 PC968 Leg 1
12 PC969 Foot 1
13 PC970 Foot screw 1
14 PC971 Foot spring 1
15 PC972 Lever release assembly 1
16 PC973 Main spring 1
17 PC974 Main spring bushing 1
18 PC975 Spring pin 1
Part
No.
Order
No. Description Qty.
19 PC976 Base toggle 1
20 PC977 Handle toggle 1
21 PC978 Base shaft 1
22 PC979 Handle shaft 1
23 PC980 Cutting blade 1
24 PC980 Cutting housing 1
25 PC982 Blade lever 1
27 PC983 Cutter blade screw 1
28 PC984 Handle 1
28A PC984 Small bushing (handle) 1
28B PC984 Big bushing (handle) 1
29 PC986 Nose hook 1
30 PC987 Handle spring 1
31 PC988 Windlass 1
32 PC989 Ratchet wheel 1
33 PC990 Clip spring 1
29
28A
28B
28
22
30
9
20 9
32
18
19
7
15B
15C
15A
15
16 17
25
21
33
27
9
23
24
2
3
4
6
5
31
14 12
13
10
1
1.
This tool (or cutter) was designed and
manufactured for safe handling during
operation. For effective use of this
product, please read and follow all safety,
maintenance and operating instructions.
4.
When cutting the strap, hold the
upper portion and stand at a safe
distance away from the strap, as
the lower strap will snap forward.
5.
Do not stand in line with the strap
while it is being tensioned, the
strap could break if over tensioned.
6.
Use the original packing products
replacement parts.
PC939 Safety Instructions
PC939 Parts List
2.
Always wear, eye face and hand protection when
operating this tool
3.
Do not put hands or other parts of
the body between the strap and the
package.
Inhaltsverzeichnis
Andere Kleton Werkzeuge Handbücher
