Klipsch KMC1SU Bedienungsanleitung

KMC1SU

Installation and Operation Manual

KMC1SU

CONTENTS

Warnings and Compliance.....................................................................................1

Introduction............................................................................................................3

Safety Information..................................................................................................4

Wiring.....................................................................................................................5

Basic Operation .....................................................................................................6

Tuner Operation.....................................................................................................8

Weather Band Operation .....................................................................................10

USB MP3 Operation ............................................................................................11

Bluetooth Operation.............................................................................................13

Specifications.......................................................................................................15

Troubleshooting ...................................................................................................15

www.asaelectronics.com

877.305.0445

KMC1SU

WARNINGS AND COMPLIANCE

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong is provided for your safety.

When the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

Portable Cart Warning

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power -supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

WARNING! To reduce the risk of fire of electric shock, do not expose this

apparatus to rain or moisture.

WARNING! The apparatus shall not be exposed to dripping or splashing and

that no objects filled with liquids, such as vases, shall be placed on

apparatus.

KMC1SU

FCC Notes

WARNING! Changes or modifications to this unit not expressly approved by

the party responsible for compliance could void the user’s authority to

operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

KMC1SU

INTRODUCTION

System Features

Features of the Klipsch KMC1SU marine audio system include:

•Full Dot Matrix LCD

•AM/FM US/EURO Tuner with 30 Presents (12 AM, 18 FM)

•USB Playback of MP3 and WMA files

•Bluetooth (Supports A2DP & AVRCP)

•Weatherband Tuner with Alerts

•Mute

•Pre-set Equalizer –5 settings (User, Flat, Pop, Classical, Rock)

•Electronic Bass, Treble and Balance

•Output Power 50W x 4

•Wired Remote Control Ready (optional KMC1RC)

•4-Channel Pre-amp Line Level Outputs (Front & Rear RCA)

Content List

•Klipsch KMC1SU Tuner/Amp Module

•Klipsch KMC1SU Wired Commander

•Wire Harness

•Quick Reference Guide

KMC1SU

SAFETY INFORMATION

When Boating

Keep the volume level low enough to be aware of your surroundings.

Protect from Water

Do not submerge the product in water, as this can cause electric shorts, fire or

other damage.

Protect from the Elements

Protect the wired commander from sunlight, dust, and water while not in use.

Protect from High Temperatures

Do not mount radio within close proximity of engine compartment.

Use the Proper Power Supply

This product is designed to operate with a 12 volt DC negative ground battery

system.

CAUTION:

DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. PLEASE

REFER SERVICING TO A QUALIFIED TECHNICIAN.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND INTERFERENCE,

USE ONLY THE RECOMMENDED ACCESSORIES.

KMC1SU

WIRING

COMMANDER

TUNER/AMP MODULE

KMC1SU

BASIC OPERATION

Power On/Off

Press the POWER button (1) to turn the unit on/off.

Volume

To increase the volume, rotate the Encoder Knob (9) clockwise. To decrease the

volume, rotate the Encoder Knob counter-clockwise.

Mute

Press the ►II button (2) on the control panel to mute the audio output. Press ►II

button again to restore the audio output to the previous level.

Mode

Press the MODE button (7) on the control panel to enter mode selection display.

Continue to press the MODE button to page through the available playback

modes. Press the associated soft button for the desired playback mode as

displayed.

Audio Menu

Press the MENU button (8) on the control panel to access the audio menu. You

can navigate through the audio menu items by rotation the Encoder Knob and

pressing the Encoder Knob to make selection. Rotate the Encoder Knob

clockwise to increase and counter-clockwise to decrease. The unit will

automatically exit the audio menu after 10 seconds of inactivity. The following

menu items can be adjusted.

Bass Level

Use the Encoder Knob to adjust the Bass level range from “-3” to “+3”.

Treble Level

Use the Encoder Knob to adjust the Treble level range from “-3” to “+3”.

Balance

Use the Encoder Knob to adjust the Balance between the left and right speakers

from “L12” (full left) to “R12” (full right).

Equalizer

Press the EQ soft button to turn on the equalization function and select between

five pre-defined bass and treble curves: USER > FLAT > ROCK > CLASSICAL >

POP.

Loudness

Press the LOUD soft button to toggle loudness on/off. When listening to music at

low volumes, this feature will boost the bass and treble ranges.

KMC1SU

System Menu

1. Press and hold the MENU button (8) for more than 3 seconds to enter the

system menu. “SYSTEM MENU” will appear on the display, followed by the

first menu item, “Key Beep.”

2. Rotate the Encoder Knob (9) to navigate the system menu and highlight the

desired item.

3. Press the Encoder Knob to select the item and rotate the Encoder Knob to

adjust the selected menu item.

4. Press the Encoder Knob again to enter your selection and return to the

menu list.

5. Press the swoop arrow soft button to return to the previous operation.

6. The following items can be adjusted:

•Key Beep (On/ Off)

•LCD Backlight (1 –10)

•LCD Contrast (1 –10)

•Button Backlight (1 –10)

•Power Button Backlight (1 –10)

•Tuning Region (USA/ Europe)

•Bluetooth Setup (Sub Menu, only accessible in Bluetooth mode)

- BT ON/OFF: Choose “BT ON” or “BT OFF”.

BT PAIR (ON/OFF): Choose “YES” to automatically pair a previously

paired device

- BT DEVICE (Lock/Unlock, Disconnect/Connect, Delete): View, lock

and delete from a list of previously paired mobile devices.

•Battery Alarm (On/Off)

•Battery Auto Off (On/Off)

•Reset to Defaults: Press Encoder Knob once to confirm. (Resets unit to

factory default settings)

NOTE: BT Pair and BT Device menu options are only available while in the

BT mode.

Battery Alarm Operation

If Battery Alarm is set to “ON”, an alarm will sound (3 beeps every 30 sec) when

the voltage drops to 10.8V (+/- 0.3V). Avisual warning (Battery Low) will appear

flashing on the LCD display.

NOTE: “OFF” is the default setting for Battery Alarm. If the audio is muted or

the volume is set to 0, the audible beep will not be heard.

Liquid Crystal Display (LCD)

The current frequency and activated functions are shown on the LCD panel.

NOTE: LCD panels may take longer to respond when subjected to cold

temperatures for an extended period of time. In addition, the visibility of the

numbers on the LCD may decrease slightly. The LCD display will return to

normal when the temperature increases to a normal range.

Back Key (swoop arrow)

In various modes and conditions, the swoop arrow option will be available in the

lower right soft button. Press button to exit the current operation without waiting for

the system default time out and returning to the previous menu display.

KMC1SU

TUNER OPERATION

Tuner mode options available are TUNE, BAND, PSET and PTY.

BAND

Select a Band

Press the BAND soft button (3) to change between FM or AM bands.

TUNE

Manual Tuning

Press the Tune soft button. Press the |<< or >>| soft buttons to decrement/

increment stations down/ up step by step.

Seek Tuning

Press and hold |<< or >>| soft buttons to automatically seek the next or previous

strongest broadcast station.

PSET

PSET mode options available are AS, PS and LIST

Press the AS soft button to automatically select strongest stations and store them

in the preset list for the selected Band. The new stations replace any stations

already stored in that band.

Press the PS soft button to scan stations stored in the current band list. The unit

will pause for ten seconds at each preset station. Press PS again to stop scanning

when the desired station is reached.

LIST

Press the LIST soft button to display the preset list. There are 18 FM and 12 AM

preset locations to store your favorite broadcast stations.

Store a Station

While tuned to the desired broadcast station, rotate the Encoder Knob (9) to

navigate the preset list and highlight the desired preset memory location. Press

and hold the Encoder Knob for 3 seconds or press the SAVE soft button to store

the station. The station frequency will appear in the display adjacent to the preset

memory location number.

Recall a Station

Rotate the Encoder Knob to navigate the preset list and highlight the desired

preset memory location. Press the Encoder Knob to select and tune to the

corresponding stored station.

Inhaltsverzeichnis

Andere Klipsch Medienplayer Handbücher

Klipsch

Klipsch GATE Bedienungsanleitung

Beliebte Medienplayer Handbücher anderer Marken

Visual Land

Visual Land Impulse Bedienungsanleitung

Transcend

Transcend DMP10 Bedienungsanleitung

Philips

Philips GoGear Muse SA2MUS08 Bedienungsanleitung

Fantec

Fantec MM-HDRL Bedienungsanleitung

Dune HD

Dune HD Duo 4K Bedienungsanleitung

IAdea

IAdea HMP-505S Bedienungsanleitung

Camos

Camos MMS-1000 Bedienungsanleitung

Energy

Energy 75 Series Bedienungsanleitung

Z3 Technology

Z3 Technology DME-03 Bedienungsanleitung

Sony

Sony SVR-2000 Benutzerhandbuch

Meicheng

Meicheng HD-1080K12 Bedienungsanleitung

DENAFRIPS

DENAFRIPS ARCE Bedienungsanleitung

Topaz

Topaz CMS Media Player Gebrauchsanweisung

InFocus

InFocus LightCast Bedienungsanleitung

IconBiT

IconBiT XDS1003D Bedienungsanleitung

Quanmax

Quanmax QDSP-2090 Series Bedienungsanleitung

Samsung

Samsung MP-80S Bedienungsanleitung

Trigon Elektronik

Trigon Elektronik CHRONOLOG Bedienungsanleitung