Klover BELVEDERE 20 Technisches Datenblatt

ENGLISH

BELVEDERE 20

wood boiler

stove

INSTALLATION, USE, MAINTENANCE

AND TIPS

SERVICE DECLARATION

Ref. Annex III EU Regulation no. 305/2011

DoP/KLOVER-028

1. Identification number

BV20

2. Model and/or lot no. and/or serial no. (Art.11-4)

BELVEDERE 20

3. Intended use of the product according to the relevant

harmonised technical specification

Home heating appliance fed with wood logs

which can also produce domestic hot water

4. Name or trademark of the manufacturer (Art11-5)

KLOVER s.r.l.

I - 37047 San Bonifacio (VR) –Via A. Volta, 8

5. Name and address of the representative (Art.12-2)

6. Assessment and verification system of the performance

constancy (Annex 5)

System 3

7. Notified laboratory

NB 1880

ACTECO s.r.l.

I - 33084 Cordenons (PN) –Via Amman, 41

Number of test report (based on System 3)

1880-CPR-050-15

8. Declared performances

HARMONISED TECHNICAL SPECIFICATION

EN 13240

PERFORMANCE FEATURES

PERFORMANCE

Fire resistance

Distance from combustible material

200 mm

Fuel spillage risk

Compliant

Emission of combustion products

-Nominal power

CO at 13% of O20.186 %

Effective temperature

Compliant

Electrical safety

Compliant

Accessibility and cleaning

Compliant

Maximum operating pressure

2.5 bar

Mechanical strength

NPD (performance not determined)

Thermal performance

-Nominal power

-Nominal power yielded to the environment

-Nominal power yielded to water

22.6 kW

9.5 kW

13.1 kW

Yield

-Nominal power

ɳ80.4 %

Flue gas temperature

-Nominal power

T310° C

9. The performance of the product referred to in points 1 and 2 is compliant with the declared performance in

point 8.

This declaration is released on the sole responsibility of the manufacturer referred to in point 4.

Signed in the name and on behalf of the manufacturer by:

San Bonifacio (VR), 24/08/2015

Mario Muraro

Chairman of the Board

CONTENTS

CONTENTS.......................................................................................................................................................................................................... 1

INTRODUCTION ................................................................................................................................................................................................. 3

IMPORTANT SAFETY INSTRUCTIONS.................................................................................................................................................................. 3

THE APPLIANCE AND WOOD......................................................................................................................................................................... 4

COMPONENTS OF THE APPLIANCE .................................................................................................................................................................... 4

OVERALL DIMENSIONS ...................................................................................................................................................................................... 8

CONNECTIONS DATA SHEET.............................................................................................................................................................................. 9

TECHNICAL SPECIFICATIONS .......................................................................................................................................................................... 10

TYPES OF WOOD.............................................................................................................................................................................................10

REQUIREMENTS OF THE PLACE OF INSTALLATION............................................................................................................................. 12

POSITIONING................................................................................................................................................................................................... 12

EXTERNAL AIR INTAKE .................................................................................................................................................................................... 12

THE FLUE PIPE AND CONNECTION TO THE SAME ............................................................................................................................................. 13

CHIMNEY ........................................................................................................................................................................................................13

ELECTRICAL CONNECTION.......................................................................................................................................................................... 14

ELECTRONIC CONTROL UNIT ...........................................................................................................................................................................14

CONTROL OF ANY COUPLED BOILER ...............................................................................................................................................................18

CONTROL OF A POSSIBLE THREE-WAY MOTORISED VALVE FOR THE DHW SYSTEM (ON PREPARED MODELS ONLY) ...................................... 19

EXAMPLE OF ELECTRICAL CONNECTION.......................................................................................................................................................... 20

HYDRAULIC CONNECTION ........................................................................................................................................................................... 21

INITIAL START-UP...........................................................................................................................................................................................23

FILLING THE BOILER UNIT AND THE SYSTEM FOR THE FIRST TIME....................................................................................................................23

ANTIFREEZE PROTECTION ..............................................................................................................................................................................23

SWITCHING ON................................................................................................................................................................................................ 23

OPERATION ....................................................................................................................................................................................................25

PRODUCTION OF DOMESTIC HOT WATER (SUITABLE MODELS ONLY)...............................................................................................................25

BOILING ..........................................................................................................................................................................................................25

PROBLEMS, ALARMS, USEFUL ADVICES.................................................................................................................................................25

USEFUL INFO…..............................................................................................................................................................................................25

WHAT HAPPENS IF.. ........................................................................................................................................................................................ 26

CLEANING AND MAINTENANCE..................................................................................................................................................................27

PRECAUTIONS BEFORE CLEANING ..................................................................................................................................................................27

CLEANING THE COMBUSTION CHAMBER..........................................................................................................................................................27

CLEANING THE ASH DRAWER..........................................................................................................................................................................29

CLEANING THE CERAMIC GLASS......................................................................................................................................................................29

CLEANING THE FLUE PIPE ............................................................................................................................................................................... 29

MAINTENANCE ................................................................................................................................................................................................ 29

MAINTENANCE OF THE BOILER UNIT................................................................................................................................................................30

WARRANTY CONDITIONS .............................................................................................................................................................................31

BELVEDERE 20 WOOD BOILER STOVE

EN - Rev. 2.3

Dear client,

First of all we would like to thank you for choosing a “KLOVER” product and we hope you will be satisfied with this

product.

Read the warranty guarantee carefully, which is found on the last page of this User guide; fill out the attached warranty

card in full and return it within 10 days from the date of purchase.

We would like to thank you again for trusting KLOVER products, and we would also like inform you that these models

are the result of forty years of experience in the manufacture of solid fuel products using water as heat transfer fluid.

Every single detail of the product is manufactured by qualified staff, using the most advanced equipment.

The manual contains a detailed description of the appliance and its operation, instructions for proper installation, basic

maintenance and control points, which must be periodically performed; furthermore it contains practical advice which

helps to obtain maximum performance from the appliance with minimum fuel consumption.

Stay warm with KLOVER!

Technical Support

Klover wood and pellet appliances are imported and distributed by FirePower Heating, Dunkeswell, Dunkeswell

Business Park, Honiton, EX14 4RD.

UK technical and product support to dealers is provided by FirePower Heating who can be reached on 0844 3320156 or

alternatively you can email them at Technical@firepowerheating.co.uk.

KLOVER Srl. is forbidden. The content of this manual may be modified without notice. Although the documentation

contained in this manual has been carefully compiled and checked, KLOVER srl cannot be held liable for any damages

arising from the use of the same.

BELVEDERE 20 WOOD BOILER STOVE

EN - Rev. 2.3

INTRODUCTION

Important safety instructions

Please read these instructions before installing and using the appliance.

-The installation and initial start-up of the appliance must be performed by skilled personnel trained in the relevant

safety standards. They will be responsible for the definitive installation of the appliance and its proper operation.

KLOVER srl shall not be held liable if these precautions are not observed.

-During installation of the appliance, all local regulations - including those referring to national and European

Standards - must be observed.

-Connect the flue gas outlet to a flue with the specifications described in the “Flue and its connection” section of this

User guide.

-The appliance is not suitable for installation on a shared flue system.

-If the flue should catch fire, use appropriate fire extinguishing equipment or call the fire brigade.

-Connect the appliance to an earthed power socket. Avoid using sockets controlled by switches or automatic timers.

-Do not use the power supply cable if damaged or worn.

-If a multiple socket is used, make sure that the total voltage of the connected devices does not exceed the rated

voltage for the socket. Also make sure that the total voltage of all the devices connected to the socket does not

exceed the maximum permitted level.

-Do not use flammable substances to clean the appliance or its parts.

-Do not leave flammable containers and substances in the place where the appliance is installed.

-The appliance works exclusively with logs and only with the hearth door shut.

-NEVER open the door of the appliance during normal operation.

-The use of poor quality wood or any other material can damage the appliance operation, voiding the warranty and

exempting the manufacturer from all liability.

-Do not use the appliance as an incinerator or for any use other than that for which it was designed.

-Do not use fuels other than those recommended.

-Do not use liquid fuels.

-The appliance, and its outer surfaces in particular, become very hot to the touch during operation; handle with

caution in order to avoid burns.

-Use the anti-burn glove to open the fire door and to regulate the smoke dampers and combustion air.

-Only use original spare parts recommended by the manufacturer.

-Do not make any unauthorised modifications to the appliance.

-Do not touch the hot components of the appliance (ceramic glass, flue pipe and the entire outer frame) during normal

operation.

-Never touch the appliance if you are barefoot and/or if you have wet or damp parts of the body.

-Use the appropriate button to switch off the electrical panel. Do not disconnect the power supply cable while the

appliance is operating.

-During the ignition phase and normal operation of the appliance, maintain the necessary safety distance and do not

remain standing in front of it.

-Keep children away from the appliance when it is running since they could get burned by touching its hot

components.

-Do not leave the packaging elements within reach of children or unassisted disabled persons.

-Children and inexperienced people must not be allowed to use the appliance.

-Do not use the appliance in ways other than those indicated in this user guide.

-The appliance is designed for indoor use only.

-This user guide constitutes an integral part of the appliance. If the appliance is sold to another user, this manual must

be passed on to the new owner.

KLOVER S.R.L. DECLINES ALL LIABILITY IN CASE OF ACCIDENTS DUE TO FAILURE TO COMPLY WITH THE

SPECIFICATIONS OF THIS MANUAL.

KLOVER S.R.L. DECLINES ALL LIABILITY DUE TO INCORRECT USE OF THE APPLIANCE BY THE USER,

UNAUTHORISED MODIFICATION AND/OR REPAIRS, AND USE OF NON-ORIGINAL SPARE PARTS OR SPARE

PARTS NOT SPECIFICALLY DESIGNED FOR USE ON THIS APPLIANCE MODEL.

BELVEDERE 20 WOOD BOILER STOVE

EN - Rev. 2.3

KLOVER S.R.L. SHALL NOT BE HELD LIABLE FOR THE INSTALLATION OF THE APPLIANCE. THE INSTALLER

IS THE SOLE PARTY RESPONSIBLE FOR THIS OPERATION AND IS ALSO ENTRUSTED WITH CHECKING THE

FLUE, EXTERNAL AIR VENT AND THE CORRECTNESS OF THE PROPOSED INSTALLATION SOLUTIONS. ALL

THE SAFETY REGULATIONS SET OUT IN THE SPECIFIC LAWS IN FORCE IN THE COUNTRY OF THE STOVE'S

INSTALLATION MUST BE OBSERVED.

NON-ROUTINE MAINTENANCE MUST ONLY BE PERFORMED BY AUTHORISED AND QUALIFIED STAFF.

To ensure the validity of the warranty, the user must comply with the instructions contained in this guide and, in

particular, must:

-Use the appliance within its operating limits;

-Regularly perform all maintenance activities;

-Authorise expert and competent people to use the appliance.

Failure to comply with the instructions contained in this guide shall automatically void the warranty.

THE APPLIANCE AND WOOD

Components of the appliance

The table below shows the standard features of the appliance:

Expansion tank

6 l

Safety valve

2.5 bar

Pressure gauge

0 –4 bar

Check valve

Yes

Automatic air vent valve

Yes

Heating system pump

Yes. Mod.25/70

Heating exchanger

Yes

DHW heat exchanger

On prepared models only

System loading cock

Yes

Boiler unit loading cock

Yes

The appliance is delivered with the following equipment:

-No. 1 - user, installation and maintenance guide;

-No. 1 - power supply cable;

-No. 1 brush D.65-300 mm L.700 mm.

-No. 1 bottle 1 l “LONG LIFE” protective.

BELVEDERE 20 WOOD BOILER STOVE

EN - Rev. 2.3

Draught regulation handle.

Turn the handle to the vertical

position to open.

Turn the handle to the

horizontal position to close.

Primary manual

combustion air

damper. Move the knob

right to open.

Move the knob left to

close.

Cover

SICURO TOP.

Primary exchanger

(heating).

SICURO TOP

Automatic air

vent valve (jolli)

Upper smoker damper.

Boiler unit loading cock.

Secondary exchanger (domestic)

(on prepared models only).

Technical compartment.

Combustion chamber.

Electronic control unit.

Level switch

(water level sensor).

Float to load boiler

unit water.

Sensor pocket for

water temperature.

BELVEDERE 20 WOOD BOILER STOVE

EN - Rev. 2.3

High-efficiency circulating

pump for heating system.

Circulating

pump speed

switch.

Pressure gauge (indicates the

pressure of the heating system).

Boiler unit drain

cock.

Boiling discharge pipe

connection SICURO TOP.

Delivery pipe connection of the heating

system with check valve.

REAR VIEW OF PLUMBING

CONNECTIONS

Heating system loading

cock.

Secondary automatic combustion air damper.

Turn the knob anti-clockwise to open.

Turn the knob clockwise to close.

DHW outlet pipe connection

(on prepared models only).

Return pipe connection of the

heating system.

DCW inlet pipe connection.

+ System load.

+ Boiler unit load.

FRONT VIEW TECHNICAL COMPARTMENT

Cable connecting 3-way

motorised valve for domestic

water system.

Expansion vessel 6 l

with pre-load 1 bar.

Anti-interference filter

Main switch, connection for power supply

cable with 2 built-in fuses (4A 250V).

Ash collection drawer.

Safety valve

calibrated to 2.5 bar

BELVEDERE 20 WOOD BOILER STOVE

EN - Rev. 2.3

UPPER VIEW TECHNICAL

COMPARTMENT

Domestic hot water outlet pipe connection (on prepared

models only).

DCW inlet pipe connection.

+ System load.

+ Boiler unit load.

Return pipe connection of the heating system.

Boiling discharge pipe connection SICURO TOP.

Delivery pipe connection of the heating system with

check valve.

Heating system loading cock.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere klover Holzofen Handbücher

klover

klover DUAL AIR Kurzanleitung

Beliebte Holzofen Handbücher anderer Marken

Plamen

Plamen ECO MINIMAL 50 Bedienungsanleitung

RAIS

RAIS 800 Bedienungsanleitung

Henley

Henley Arklow Bedienungsanleitung

Jøtul

Jøtul F 500 Bedienungsanleitung

Englander

Englander BLUE RIDGE 100 Bedienungsanleitung

WoodPro

WoodPro WS-TS-1500 Bedienungsanleitung

Contura

Contura C 586W Bedienungsanleitung

Nordpeis

Nordpeis N-20 T Bedienungsanleitung

Palazzetti

Palazzetti EVA Konfigurationshandbuch

Lopi

Lopi 1250 Republic Bedienungsanleitung

Panadero

Panadero CAPRI 3V Programmierhandbuch

RAIS

RAIS RONDO 92 Bedienungsanleitung

RAIS

RAIS attika NEXO 100 GAS Bedienungsanleitung

ADURO

ADURO 15-3 Benutzerhandbuch

Pacific energy

Pacific energy SUPER 27 SPECTRUM Bedienungsanleitung

Avalon

Avalon Olympic 11190 Bedienungsanleitung

Ventis

Ventis HES350 Bedienungsanleitung

IronStrike

IronStrike Striker S160GL Bedienungsanleitung

klover BELVEDERE 20 Technisches Datenblatt

Beliebte Holzofen Handbücher anderer Marken