KMC Controls MCP-1160 Series Bedienungsanleitung

Installation Guide

6” Pneumatic Damper Actuator

MCP-1160 Series

Mounting

The MCP-1160 MUST be mounted on a rigid

surface due to the force generated at, or near,

maximum air pressure.

1. Align the actuator with the controlled device.

The mounting joint allows the actuator to be

located in a different plane from the controlled

device.

2. Attach the actuator to the rigid surface through

the four 3/8" (4 mm) holes in the mounting

bracket.

3. Adjust the crankarm assembly from 60° to 120°

rotation as required.

4. DO NOT tighten the universal joint. The

actuator must be free to swivel as it operates.

Connections

MCP-1160 models ordered with positioners are

factory piped.

♦Use 1/4" (6 mm) O.D. FR polyethlyene tubing.

♦Use only clean, dry control air. No attempt

should be made to use any other medium.

1 Connect the actuator input to the positioner

output, Port “1”.

2. Connect the input signal to the positioner to Port

“2”.

3. Connect the main air (20 psi) to the center port.

NOTE: If the application requires operation near

the maximum temperature and maximum

pressure, add a tubing restraint to the actuator

connection.

KMC Controls

19476 Industrial Drive

New Paris, IN 46553

574.831.5250

www. kmccontrols.com

016-019-01

Adjustments and Calibration

DANGER

The MCP-1160 contains a large powerful spring.

Exercise extreme caution if disassembly is required.

The actuator shaft MUST be restrained to prevent

the spring from expanding.

The MCP-1160 contains an 8-13 psi spring. A

positioner allows the unit to operate over any 5 psi

span with the start-point adjustable from 3-10 psi.

Replace the 5 psi spring with a 10 psi spring to widen

the span.

To change the positioner start-point:

1. Apply the desired signal pressure

2. Rotate the start-point adjuster until the actuator

starts to stroke.

Maintenance

The MCP-1160 actuator is designed for long term

reliability. No routine maintenance is required,

however care should be taken during any installation

or maintenance due to the power of the actuator.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KMC Controls Controller Handbücher

KMC Controls

KMC Controls CSP-4702 Bedienungsanleitung

KMC Controls

KMC Controls MEP-1500 Series Bedienungsanleitung

KMC Controls

KMC Controls BAC-7001 Bedienungsanleitung

KMC Controls

KMC Controls SimplyVAV BAC-8001 Benutzerhandbuch

KMC Controls

KMC Controls BAC-9001CE Bedienungsanleitung

KMC Controls

KMC Controls BAC-7003 Bedienungsanleitung

KMC Controls

KMC Controls FlexStat BAC-120063CW-ZEC Bedienerhandbuch

KMC Controls

KMC Controls SimplyVAV BAC-8001 Bedienungsanleitung

KMC Controls

KMC Controls BAC-5900 Series Bedienungsanleitung

KMC Controls

KMC Controls MCP-1060 Series Bedienungsanleitung

KMC Controls

KMC Controls CTE-3017 Bedienungsanleitung

KMC Controls

KMC Controls MEP-4201 Bedienungsanleitung

KMC Controls

KMC Controls MEP-4201 Bedienungsanleitung

KMC Controls

KMC Controls MCP-1040 Series Bedienungsanleitung

KMC Controls

KMC Controls BAC-9300 Series Bedienungsanleitung

KMC Controls

KMC Controls SimplyVAV BAC-8205 Bedienungsanleitung

KMC Controls

KMC Controls CSC 3000 Series Benutzerhandbuch

KMC Controls

KMC Controls KMD-7001 Original Betriebsanleitung

KMC Controls

KMC Controls MCP-1020 Series Bedienungsanleitung

KMC Controls

KMC Controls MEP-7 Series Benutzerhandbuch

KMC Controls

KMC Controls CSC-3501 Bedienungsanleitung

KMC Controls

KMC Controls KMD-5205 Betriebsanleitung

KMC Controls

KMC Controls KMD-5210 Betriebsanleitung

KMC Controls

KMC Controls AppStat Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung