Knog PARTY COMBO Administratorhandbuch
CLICK!
KNOG PARTY COMBO
- HOW TO GUIDE -
STARTING OUT:
Default code: 0-0-0-0
1. Remove the black plug
2. While holding the cable ends, firmly hold &
rotate the end cap
3. Keep cable fixed during reset
Listen for *click*
DO NOT TWIST ANY DIALS
ACTIVE RESET:
4. Reset is active when endcap is twisted
counter-clockwise 90oso the shackle entry
lines up with the marker and clicks into place
5. Active reset: set code to the lower marker
(blue circle)
NEW CODE:
6. Choose your combination - align with marker
(blue circle)
ie. The chosen code for the lock diagram is
“4352”
All manuals and user guides at all-guides.com
all-guides.com
SET CODE:
7. To SET new code return the end cap to its
original position by twisting clockwise to align
with cable marker
*DO NOT rotate dials at this stage*
LOCK & LOAD:
8. New code is now ACTIVE.
This means shackle is open to insert cable pin.
9. Insert the cable and rotate dials.
The cable should NOT come loose.
*To release the cable enter your unique code*
**No other combination will release the lock
once the code is set**
GENERAL NOTES:
1. Please do not purchase any lock if the plug is
removed. This means the code may have been
tampered with!
2. When travelling with your combo lock, avoid
leaving it unlocked
3. Keep your combination stored safely
1.
All manuals and user guides at all-guides.com
Inhaltsverzeichnis
Andere Knog Sperren Handbücher
