Kodak EKTAGRAPHIC III Bedienungsanleitung

Maintenance

Maintenance is recommend at least every 1200 hours of operation. Dirt and dust can have an adverse

effect on lubricants used in the projector and may cause malfunctions. Projectors that are operated in

dusty environments should have maintenance more frequently.

Recommended cleaning materials:

·Lens cleaner ·Clean, soft cloth

·Glass cleaner (no solvent based cleaners ·Lens tissues

·Soft bristle brushes ·Can of compressed air

·Cotton swabs

How to clean your projector

Follow these maintenance instructions for safe, efficient cleaning of your projector. Be sure your projector

is unplugged and cool before performing any maintenance on it.

1. Clean the projector housing with a clean, soft cloth and glass cleaner.

2. Inspect the gate for cleanliness. If the gate area is dirty use a brush and compressed air to clean it.

3. If the gate rails are dirty or have a white powder coating, slides may not fall properly. Spray a cotton

swab with glass cleaner and gently scrub the rails to remove the powder buildup. Use a dry cotton

swab to remove excess cleaner.

CAUTION: When cleaning gate rails do not bend the pressure pad.

4. Loss of illumination can be caused by a dirty mirror, condenser lens, or projection lens. Remove the

lamp module. Clean the mirror using lens cleaner or clear water, and a soft lint-free cloth or lens

tissue. Do not wipe the mirror with a dry cloth.

5. Clean the condenser lens with lens cleaner or water and a lint-free cloth or lens tissue.

6. Clean the projection lens with lens cleaner or clear water. Do not clean the lens with a dry cloth.

7. Keep the air exhaust grille clean. Use compressed air and a brush to remove dirt. Inspect this area

often! If it appears dirty, your projector may require professional cleaning* and should be taken to an

Authorized Kodak Repair Shop.

*Cleaning is not covered under the Manufacturers Warranty.

Step 2

KODAK EKTAGRAPHIC III AFT Projector

Step 3

Step

Step 4

Step 6 Step 7

New 2/98. Minor revision 7/99

Part No. 2H2412 Kodak and Ektagraphic are trade arks. Printed in U.S.A.

Operation

The KODAK EKTAGRAPHIC III AFT Projector is

equipped with controls to adjust the FADE and VIEW

cycles. They are located under the projector handle. It is

shipped with factory default settings of:

·AUTOMATIC AFT mode - ON ( I

·VIEW time - 10 seconds

·FADE Up and Down - 0.5 second each (total

1 second

To use:

1. Install a loaded slide tray.

2. Turn the slide projector ON by selecting low or high lamp position on the control panel.

3. The projector will automatically advance slides, fading between slide changes, and will continue until

the projector is turned off.

To adjust VIEW control:

Using a small, flat-blade screwdriver, turn the VIEW screw clockwise or counterclockwise to increase or

decrease the amount of time you want the image projected (5 to 15 seconds .

To adjust FADE control:

Using a small, flat-blade screwdriver, turn the FADE screw clockwise to fade up and down (0.5 to

4 seconds . Total fade time is two times your selection.

NOTE: You may make these adjustments with the projector lamp either ON or OFF.

To turn off AFT mode:

Using a flat-blade screwdriver, move the Automatic AFT mode to the OFF ( O position. The projector can

now be used as a standard EKTAGRAPHIC III A Projector. Should you need a user manual for this model,

you can obtain one by calling the Kodak Information Center in the U.S. at 1-800-242-2424, or in Canada at

1-800-465-6325.

Tips

·Keep the operating environment clean; dust and dirt can negatively impact operation.

·To help maximize projector performance, clean the projector regularly following the maintenance

instructions included here.

·Keep extra lamps on hand.

·Have an extra lamp module on hand for quick lamp change. It only takes a few seconds to change a

lamp module, but it could take a while for a lamp to cool enough to change the lamp itself!

·For cooler operating temperature and longer lamp life, use an FHS lamp designed for use with

KODAK EKTAGRAPHIC Slide Projectors. If you wish to purchase this lamp, ask your local dealer to

order CAT No. 147 7678.

·Note your local dealer and service organization telephone numbers here for quick reference.

Local Kodak Dealer: _____________________________________________________________

_____________________________________________________________________________

www.kodak.co /go/projectors

Andere Handbücher für EKTAGRAPHIC III

Dieses Handbuch passt für folgende Modelle

Andere Kodak Projektor Handbücher

Kodak

Kodak V600 Bedienungsanleitung

Kodak

Kodak Carousel S-RA2000 Bedienungsanleitung

Kodak

Kodak V600 Bedienungsanleitung

Kodak

Kodak V600 Bedienungsanleitung

Kodak

Kodak DP800 - Digital Projector Betriebsanleitung

Kodak

Kodak EKTAPRO 9020 CINE Bedienungsanleitung

Kodak

Kodak Pocket Pico Projector Bedienungsanleitung

Kodak

Kodak Carousel 4200 Bedienungsanleitung

Kodak

Kodak LUMA 350 Bedienungsanleitung

Kodak

Kodak pagent 250s Bedienungsanleitung

Kodak

Kodak EKTAPRO 7010 Bedienungsanleitung

Kodak

Kodak DP2900 - Digital Projector Bedienungsanleitung

Kodak

Kodak Pocket Portable Projector Bedienungsanleitung

Kodak

Kodak LUMA 350 Bedienungsanleitung

Kodak

Kodak Carousel S-AV 2010 Bedienungsanleitung

Kodak

Kodak Luma 75 Bedienungsanleitung

Kodak

Kodak Pocket Pico Projector Bedienungsanleitung

Kodak

Kodak 5600 - BC5601 Carousel Projector Bedienungsanleitung

Kodak

Kodak Ektalite E30 Bedienungsanleitung

Kodak

Kodak Carousel S-AV 1050 Bedienungsanleitung

Kodak

Kodak Brownie A15 Bedienungsanleitung

Kodak

Kodak DP2000 - Digital Projector Bedienungsanleitung

Kodak

Kodak Pocket Portable Projector Bedienungsanleitung

Kodak

Kodak DP850 - Ultra Digital Projector Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung