Kodo Pro KNS-2200FT Bedienungsanleitung
User’s Manual
22X PTZ III NETWORK DOME CAMERA
Please read this manual thoroughly before use and keep it handy for future reference.
KNS-2200FT/M3-S
www.kodobr.com.br
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO
NOT INSERT ANY METALLIC OBJECTS THROUGH THE
VENTILATION GRILLS OR OTHER OPENINGS ON THE
EQUIPMENT.
CAUTION
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral is
intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
II
FCC COMPLIANCE STATEMENT
FCC INFORMATION: This equipment has been tested and found
to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense.
CAUTION: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority
to operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
CE COMPLIANCE STATEMENT
WARNING
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
III
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been moisture, does not
operate normally, or has been dropped.
15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE
BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE
RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING
OTHER THAN THAT CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU QRE QUALIFIED TO DO SO.
16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or
Certified/Listed Class 2 power source only.
IV
Table of Contents
Chapter 1 — Introduction ..........................................................................................................1
1.1 Features .............................................................................................................................................1
Chapter 2 — Installation and Configuration .........................................................................2
2.1 Package Contents............................................................................................................................2
2.2 Installation .........................................................................................................................................3
2.3 Basic Configuration of Dome Camera System ........................................................................5
2.4 Setting Dome Camera Address (ID)............................................................................................6
2.5 Connections......................................................................................................................................6
2.6 IP Assignment ..................................................................................................................................7
2.7 Getting Started .................................................................................................................................8
Chapter 3 — Program and Operation .....................................................................................9
3.1 Dome Camera Selection ................................................................................................................9
3.2 Accessing the On-Screen Menu Utility ......................................................................................9
3.3 How to control the On-Screen Menu Utility ..............................................................................9
3.4 Auto Scan (Shortcut: SCAN) .....................................................................................................10
3.5 Preset (Shortcut: PRST) .............................................................................................................12
3.6 Shortcut of Preset Program........................................................................................................13
3.7 Tour (Shortcut: TOUR) .................................................................................................................14
3.8 Pattern (Shortcut: PTRN).............................................................................................................16
3.9 Area Title..........................................................................................................................................17
3.10 Privacy Zone.................................................................................................................................18
3.11 Camera Menu................................................................................................................................19
3.12 Dome Setup ..................................................................................................................................22
3.13 Dome Communication ...............................................................................................................28
3.14 Function Run ................................................................................................................................29
3.15 Factory Setup ...............................................................................................................................29
Chapter 4 — Operation by Web Browser ............................................................................30
4.1 Access from a browser ................................................................................................................30
4.2 Access from the internet .............................................................................................................31
4.3 Setting the admin password over a secure connection......................................................31
4.4 Live View Page ...............................................................................................................................31
4.5 Network Camera Setup ................................................................................................................33
4.5.1 Basic Configuration...............................................................................................................34
1) Users ............................................................................................................................ 34
2) Network........................................................................................................................ 35
3) Video & Image ............................................................................................................. 36
V
VI
4) Audio............................................................................................................................ 38
5) Date & Time ................................................................................................................. 39
4.5.2 Video & Image .........................................................................................................................40
1) Basic ............................................................................................................................ 40
2) Webcasting – Channel1.............................................................................................. 40
4.5.3 Audio .........................................................................................................................................41
4.5.4 Event..........................................................................................................................................41
1) Event-In........................................................................................................................ 41
2) Event-Out..................................................................................................................... 45
3) Event Map .................................................................................................................... 51
4.5.5 System ......................................................................................................................................53
1) Information .................................................................................................................. 53
2) Security........................................................................................................................ 53
3) Date & Time ................................................................................................................. 56
4) Network........................................................................................................................ 57
5) Language ..................................................................................................................... 64
6) Maintenance ................................................................................................................ 64
7) Support ........................................................................................................................ 65
4.5.6 About .........................................................................................................................................66
4.6 PTZ Control .....................................................................................................................................66
4.7 Help ...................................................................................................................................................67
4.8 Resetting to the factory default settings.................................................................................68
4.9 System Requirement for Web Browser ...................................................................................68
Appendix A — Specifications.................................................................................................69
Appendix B — Troubleshooting ............................................................................................72
Appendix C — Glossary...........................................................................................................72
Appendix D — Short Cut Key .................................................................................................75
Chapter 1 — Introduction
1.1 Features
The dome camera and the keyboard controller, PC software makes up the building blocks for any
surveillance/security system. Using multiple keyboard controllers and multiple dome cameras, no
place is too large for monitoring. Extensible and flexible architecture facilitates remote control
functions for a variety of external switching devices such as multiplexers and DVRs.
Built-in optical power zoom camera with True Night Shot function
Dual video streams simultaneously at full frame rate in all resolutions up to D1 (720X480 in
NTSC, 720X576 in PAL) using Motion JPEG and H.264 (or MPEG-4)
Intelligent capabilities such as enhanced video motion detection
The encoder’s external inputs and outputs can be connected to devices such as sensors and
relays, enabling the system to react to alarms and activate lights or open/close doors.
Supports two-way audio
Logs all user access, and lists currently connected users. Also, full frame rate video can be
provided over HTTPS.
Interface Protocol: TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, QoS, FTP, SNMP, uPnP, RTP,
RTSP, RTCP, DHCP, ARP
120 Preset positions with the individual Camera AE setup
4 Tours consist of Presets, Patterns, Auto Scans and other Tours can be programmed with
over 150 functions and Preset locations. While moving, each Preset scan can be watched in
smooth Vector Scan mode.
4 Auto Scans with the normal, the vector, and the random mode and the Endless Auto-Pan
with 13 speed steps
4 Patterns (up to 200 second) and 4 Privacy Zones
8 Area Titles
1 Alarm input / 1 Alarm output
Variable speed from 0.1/sec to 380/sec
Three Variable speed (SLOW, NORMAL, TURBO)
Turbo speed is 380/sec with Ctrl key pressed.
Pan / Tilt speed is inversely proportional to the zoom ratio with the option.
Maximum speed is 380/sec when Preset command.
Auto Calibration from 0.1to 6(Tilt range is 0to 180)
Programmable user preferences (alarm, preset, title, etc.)
180Digital Flip
Up to 255 selectable camera addresses
Multi-language Menu Display, Password Confirmation
Function Run menu using DVR without function key (Pattern, Scan, …)
Built-in RS-485 receiver driver
12VDC for Dome
Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source only.
1
Chapter 2 — Installation and Configuration
2.1 Package Contents
The dome camera is design to a compact, small size, hard dome camera housing.
The housing is constructed of aluminum, steel and plastic. The housing is designed to be
mounted both wall and ceiling type.
The housing meets the Protection Classification IP66 standards for dust and moisture resistance.
* Dome Camera 1
* Installation Guide/CD 1
* Template Sheet 1
* Mounting Bracket 1
* Safety Lanyard 1
* Accessory Kit 1
1) Mounting screws (PH6 x 35.0) (4)
2) Plastic anchors (4)
3) O-Rings (4)
4) Torx wrench (1)
* Accessory Connector 1
1) 2Pin Terminal Block (1)
2) 3Pin Terminal Block (1)
3) 6Pin Terminal Block (1)
2
2.2 Installation
The dome camera is for use in surface or pendent mounting applications and the mounting
member must be capable of supporting loads of up to 3.5lb (1.6kg). (Pendent mounting must use
pendent mount accessory.)
The dome camera’s mounting bracket should be attached to a structural object, such as hard
wood, wall stud or ceiling rafter that supports the weight of the dome camera.
CAUTION: A silicone rubber sealant must be applied to seal the housing to secure
waterproofing.
2.2.1 Locking Dome Camera
A. Make screw holes on the ceiling using the supplied mounting Template Sheet (Figure A).
B. Fix the Mounting Bracket using Anchors(4x) and Mounting Screws(4x) to the ceiling (Figure B).
C. Hook up the Safety Lanyard to the Safety Lanyard Hook of the Mounting Bracket (Figure C).
D. Align the locking tap on the bracket and the locking slot on the base of the dome (Figure D).
E. Turn the dome to the counterclockwise about 10 degree to the locked position (Figure E).
3
CAUTION: Before installing mounting bracket to surface pre-adjust the four mounting
screws "A" on the base of the dome camera to best match the mounting
bracket locked position. Unscrew the locking screw on the side of the dome's
base and fit the tab of the mounting bracket into the locking slot. Screws "A"
should not be too tight or too loose when the dome is in the locked position.
After setting the proper positions of screws "A" remove the mounting bracket
and install it to the proper surface. If it is too difficult to lock the dome in
position after the mounting bracket has been installed readjust the screws "A"
by unscrewing them a small amount and try to install dome camera again.
4
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Kodo Pro Sicherheitskamera Handbücher
Kodo Pro
Kodo Pro KNB-1103T/R32 Bedienungsanleitung
Kodo Pro
Kodo Pro KNS-2000FH Bedienungsanleitung
Kodo Pro
Kodo Pro KSD-2200/L3 Bedienungsanleitung
Kodo Pro
Kodo Pro KNB-2100T-R20 Bedienungsanleitung
Kodo Pro
Kodo Pro KNV-1103AT Bedienungsanleitung
Kodo Pro
Kodo Pro KCB-7500ND Bedienungsanleitung
Kodo Pro
Kodo Pro KCV-8710NV Bedienungsanleitung
Kodo Pro
Kodo Pro KSD-3610/A3 Bedienungsanleitung
Kodo Pro
Kodo Pro KNS-1108FT Bedienungsanleitung
