Kogan KASTTVPB55A Bedienungsanleitung

PORTABLE TV MOUNT

STAND CART

(32" - 55")

KASTTVPB55A

CAUTION:

Rated weight for the TV stand is 33kg (77 lbs). The rated weight for the storage shelf

is 5kg (11 lbs).

Use with products heavier than the rated weights indicated may result in instability

causing possible injury.

•Please closely follow the assembly instructions. Improper installation may result in

damage or serious personal injury.

•Safety gear and quality tools must be used.

•When in use, make sure the stand is on a flat level surface and the caster wheels

are locked.

•Do not allow children to play near this stand.

•This product contains small items that could be a choking hazard if swallowed.

Keep these items away from children.

•This product is intended for indoor use only. Using this product outdoors could lead

to product failure and personal injury.

•A minimum of two people are recommended for this installation. Failure to use

safety gear and safe working methods may result in property damage, serious

injury or death.

IMPORTANT: Ensure that you have received all parts according to the component checklist

prior to installation. If any parts are missing or faulty, contact your place of purchase for a

replacement.

MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at

least every three months).

VESA compatibility:

100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400

Suitable for TVs 32” – 55” maximum

SAFETY & WARNINGS

Stand assembly:

A(x1)

B(x2)

C(x1)

D(x1)

E(x1)

F(x1)

G(x1)

H(x1)

I(x1)

J(x4)

K(x1)

L(x1)

M(x2)

NM6x50 (x4)

OM6x35 (x4)

PM6x16 (x11)

Q(x8)

R(x1)

S(x1)

T(x1)

Adapters (Depends on TV):

M-A M5x14 (x4)

M-B M6x14 (x4)

M-C M6x30 (x4)

M-D M8x30 (x4)

M-E M8x50 (x4)

M-F (x4)

M-G (x8)

M-H (x8)

COMPONENTS

Step 1: Assembling the base

Attach the cross-beam (C) to the two base beams (B), using the Allen key (S) to tighten the

M6x16mm (P) and M6x35mm (O) screws in place as shown below.

After the cross-beam is secured, attach the locking caster wheels (J), using the spanner (T)

to tighten. Once the casters are installed, clamp the locks down to ensure the stand does

not move suddenly during the remainder of the assembly. Place the joint left and right joint

covers (K, L) into position as shown below.

ASSEMBLY

Unlock

Lock

Step 2: Attaching the stand

Place the stand (A) and joint cover (I) into position on the cross-beam, securing it with x4

washers (Q) and M6x50mm screws (N). Use the Allen key (S) to tighten.

Warning: To adjust the height, pull

the safety spring lock outwards (1)

while pulling the column upward

(2) at the same time. Always

ensure the spring lock aligns with

the keyhole, otherwise a sudden

drop may occur resulting in injury

or property damage.

Note: The MAX line found on the

column indicate the highest

position. Never go beyond the

MAX line marking.

Step 3:

Insert the supporting M6x16mm screw (P) into the extended stand, tightening it with the

Allen key. Insert the hole covers (R, M) in place.

Step 4:

Attach the mounting plate (D) to the front of the stand, securing it with x4 washers (Q) and

M6x16mm screws (P), using the Allen key to tighten.

Step 5:

Attach the shelf (G) to the stand, securing it to the shelf mount (H) with M6x16mm screws

(P). The shelf is suitable for use with laptops, DVD and Blu-ray players, hard drives, gaming

consoles, or anything else as long as the weight limit (5 kg) is not exceeded.

Step 6:

Attach the mounting brackets to your TV. Depending on your TV, a combination of spacers

(M-G, M-H) may be required to help create the correct amount of space for the brackets.

Ensure the screws are fitted correctly into your TV’s VESA mount holes, and are not too long

or too short in the back of the TV.

Also note that the M-F adapter is used for both small screws (M-A, M-B) and large screws

(M-C, M-D, M-E) depending on its orientation.

Step 7:

NOTE: Ensure the locking caster wheels (J) are locked before attempting to mount the TV.

With two people, lift the TV up and above the mounting plate and gently lower down into

place, ensuring the TV is evenly positioned in the middle of the stand.

The brackets each feature a vertical screw to secure to the bottom of the mount. Hook this

screw underneath the mount and tighten to secure.

A minimum of two people are recommended for this installation.

Failure to use safety gear and safe working methods may result in

property damage, serious injury, or death.

Inhaltsverzeichnis

Andere Kogan Rack & Stand Handbücher

Kogan

Kogan KAWLM82TEXA Bedienungsanleitung

Kogan

Kogan KASMM39S12A Bedienungsanleitung

Kogan

Kogan KAWLMSBMNTA Bedienungsanleitung

Kogan

Kogan KAWLM90FIXT Bedienungsanleitung

Kogan

Kogan ovela OVDELUXWCRA Bedienungsanleitung

Kogan

Kogan KAWLM70CNRA Bedienungsanleitung

Kogan

Kogan NB14T20DSBA Bedienungsanleitung

Kogan

Kogan KAWLMFM55MA Bedienungsanleitung

Kogan

Kogan KASTDARIKLA Bedienungsanleitung

Kogan

Kogan FSDB24STNDB Bedienungsanleitung

Kogan

Kogan KASLSTMTSTA Bedienungsanleitung

Kogan

Kogan KAACTCSACCA Bedienungsanleitung

Kogan

Kogan KAWLMDLSTND Bedienungsanleitung

Kogan

Kogan KASMM39S24A Bedienungsanleitung

Kogan

Kogan KAWLM70TLTA Bedienungsanleitung

Kogan

Kogan KALTHDSTVSA Bedienungsanleitung

Kogan

Kogan KAWLM55TLTA Bedienungsanleitung

Kogan

Kogan KATVBKSTNDA Bedienungsanleitung

Kogan

Kogan KATVSTHLDCA Bedienungsanleitung

Kogan

Kogan OSTIA Series Bedienungsanleitung

Kogan

Kogan KAWLMFX75MA Bedienungsanleitung

Kogan

Kogan KAWLM55TEXA Bedienungsanleitung

Kogan

Kogan KAWLM55CNRA Bedienungsanleitung

Kogan

Kogan PS5 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung