1. TONE ARM REST: this rest is used to hold the tone arm while you are
loading your record,
2. RPM: 45RPM Adapter
3. ARM CLIP: This specially designed arm clip secures the tone arm when
nor in use at upright position. When the unit is in use, fold this tone arm
down so as to not bloc your record.
4. TONE ARM: The turntable comes with a ready to use, pre-balanced tone
arm and cartridge. The tone arm is raised and lowered by hand, Please
note that the tone arm needs to be moved away form its resting position
on the arm clip for the turntable motor to start,
5. CARTRIDGE PROTECTOR: Please remove the plastic cartridge protector
before placing the cartridge on a record by sliding it forward, off of the
cartridge.
6. RUBBER MAT: Protects your records while playing.
7. RCA OUTPUT: Use to connect to external spea ers (not included).
8. USB JACK: for charging and connecting to PC for recording and editing
by USB cable.
9. 33/45: Alternate play speeds between 33/45 RPM.
LISTENING TO A RECORD
1. Lower the ARM CLIP so you can place a record.
2. Place a record on the turntable and set the player speed to match the
record speed.
NOTE: when playing a single (a 45 rpm record) and/or records with large
center holes, use the 45 rpm adapter.
3. Remove the needle arm from its rest, and gently move it to the desired
position over the record. The turntable platter will begin when the arm is
moved towards it. Gently let the needle arm descend onto the record to
begin playing.
