Kohler K-T10185 Bedienungsanleitung

Installation Guide

Three-way Transfer Valve Trim

K-T376, K-T10185, K-T10113,

K-T10290, K-T10304, K-T10340,

K-T10424, K-T10429, K-T10595,

K-T10682, K-T10944, K-T12189,

K-T13175, K-T14491, K-T16178,

K-T16242, K-T18491

Mproduct numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

Mcorresponden a México (Ej.

K-12345M)

Français, page “Français-1”

Español, página “Español-1”

1041514-2-J

Thank You For Choosing Kohler Company

Thank you for choosing Kohler Company. Your Kohler Company

product reﬂects the true passion for design, craftsmanship, artistry, and

innovation Kohler Company stands for. We are conﬁdent its

dependability and beauty will surpass your highest expectations,

satisfying you for years to come.

All the information in this guide is based upon the latest product

information available at the time of publication. At Kohler Company,

we strive to fulﬁll our mission of improving the level of gracious living

for each person who is touched by our products and services. We

reserve the right to make changes in product characteristics, packaging,

or availability at any time without notice.

Please take a few minutes to review this guide. If you encounter any

installation or performance problems, please call 1-800-4KOHLER

(1-800-456-4537) from within the USA and Canada, or 001-877-680-1310

from within Mexico.

Tools and Materials

Before You Begin

Shut off the main water supply.

Observe all local plumbing and building codes.

The trim design illustrated in this guide is representative and

may differ from the actual trim being installed. Install the trim as

instructed.

Kohler Co. reserves the right to make revisions in the design of

products without notice, as speciﬁed in the price book.

Screwdrivers Hex

Wrenches

1041514-2-J 2 Kohler Co.

1. Install the Valve Stem Adapter

NOTE: Check the ﬁnished wall surface as related to the graphics on

the plaster guard.

Select the correct length valve stem adapter and valve stem

adapter screw for your application. Refer to the information

stamped on the plaster guard to verify the wall thickness.

For a thin wall - 3/16″(5 mm) to 9/16″(1.4 cm):use the 1/2″(1.3

cm) (short size) valve stem adapter, stamped ″3″on the plaster

guard, and the 13/16″(2.1 cm) screw.

For a standard wall - 9/16″(1.4 cm) to 1-1/16″(2.7 cm):use the 7/8″

(2.2 cm) (middle size) valve stem adapter, stamped ″1″on the

plaster guard, and the 13/16″(2.1 cm) screw.

For a thick wall - 1-1/16″(2.7 cm) to 1-9/16″(4 cm):use the 1-3/8″

(3.5 cm) (long size) valve stem adapter, stamped ″2″on the plaster

guard, and the 1-3/8″(3.5 cm) screw.

Remove and discard the plaster guard from the transfer valve.

Place the spline adapter over the valve stem.

Set the correct valve stem adapter over the valve stem. Do not

completely press or screw the valve stem adapter into place

until instructed to do so.

Select the correct

valve stem adapter.

Remove and discard

the plaster guard.

Transfer

Valve

Spline

Adapter

Valve Stem

Adapter

Kohler Co. 3 1041514-2-J

2. Adjust the Handle Assembly

NOTE: Valve Operation. Water will ﬂow from a single shower

accessory when the control knob detent lines up with any of the

large detents on the escutcheon. Water will ﬂow from two

accessories at the same time when the control knob detent lines up

with a small escutcheon detent.

Ensure the valve stem adapter is lightly placed over the spline

adapter.

Place the handle assembly over the valve stem adapter.

Turn on the water supply to the transfer valve.

Rotate the handle assembly until water begins to ﬂow through

the shower accessory.

Determine the shower accessory that will correspond to the

Accessory ″A″setting at the 12 o’clock position on the escutcheon.

Turn the handle to the detent setting that corresponds with

Accessory ″A.″The handle should be in the vertical 12 o’clock

position.

Remove the handle assembly and set aside.

Accessory “A”

Accessory “C”

Accessory “B”

Accessory “A” Accessory “B”

Accessory “C”

Control Knob Detent

Combined Accessories

“A” and “C”

Combined Accessories

“B” and “C”

Combined

Accessories “A”

and “B”

Valve Stem

Adapter

Spline Adapter

Transfer Valve

Handle

Assembly

Mixed Water

Supply

1041514-2-J 4 Kohler Co.

Adjust the Handle Assembly (cont.)

To adjust for handle alignment:

NOTE: The spline adapter allows ﬁne adjustment of the handle

alignment.

Remove the handle assembly and the valve stem adapter.

Reposition the spline adapter.

Reinstall the handle assembly and the valve stem adapter.

Check the alignment. Repeat this procedure until the handle

alignment is satisfactory.

Kohler Co. 5 1041514-2-J

3. Install the Trim

NOTE: If you are installing the K-T10424 trim, proceed to the

″Install the Trim - K-T10424″section of this guide.

Firmly press the valve stem adapter onto the valve stem.

Secure the valve stem adapter to the valve with the correct length

screw, as selected in the ″Install the Valve Stem Adapter″section

of this guide.

Align the holes on the front plate assembly and the valve.

NOTE: Be sure to select the correct length screw for your

application.

Attach the two screws through the front plate assembly and into

the valve. Do not overtighten.

Visually inspect the front plate assembly to ensure that the foam

seal is completely covering the wall opening. If not, stop the

installation and repair the wall opening.

Place the escutcheon against the wall. The drain hole in the

escutcheon should face downward in the 6 o’clock position.

Turn the handle assembly to the vertical 12 o’clock position.

Thread the handle assembly onto the hub of the front plate

assembly to secure the escutcheon in place.

NOTE: If the handle does not engage the valve or the escutcheon

does not tighten to the wall, replace the valve stem adapter with an

adapter of appropriate length.

Transfer Valve

Handle Assembly

Escutcheon

Screw

Valve Stem Adapter

Front Plate

Assembly

Screws

1041514-2-J 6 Kohler Co.

4. Install the Trim - K-T10424

Firmly press the valve stem adapter onto the valve stem.

Secure the valve stem adapter to the valve stem with the correct

length screw, as selected in the ″Install the Valve Stem Adapter″

section of this guide.

Align the holes on the front plate assembly and the valve.

NOTE: Be sure to select the correct length screw for your

application.

Attach the two screws through the front plate assembly and into

the valve. Do not overtighten.

Visually inspect the front seal plate assembly to ensure that the

foam seal is completely covering the wall opening. If not, stop the

installation and repair the wall opening.

Place the escutcheon against the wall. The drain hole in the

escutcheon should face downward in the 6 o’clock position.

Thread the adapter ring onto the hub of the front plate assembly.

Place the handle assembly against the escutcheon by lining up the

pins in the handle assembly with the holes in the escutcheon.

Make sure the handle is in the 12 o’clock position and the

setscrew hole is facing down.

Tighten the setscrew in place with a hex wrench. Make sure the

handle assembly is tight against the escutcheon.

Valve Stem

Adapter

Screw

Transfer Valve

Escutcheon

Front Plate Assembly

Adapter

Ring Handle

Assembly

Setscrew

Screws

Kohler Co. 7 1041514-2-J

Guide d’installation

Garniture de valve de transfert à trois voies

Outils et matériels

Merci d’avoir choisi la compagnie Kohler

Merci d’avoir choisi la compagnie Kohler. Votre produit de la

compagnie Kohler reﬂète la véritable passion du design, d’artisanat,

d’art et d’innovation représentant la compagnie Kohler. Nous sommes

conﬁants que sa ﬁabilité et beauté surpasseront vos exigences les plus

élevées, vous satisfaisant pendant les années à venir.

Toute l’information dans ce guide est basée sur la dernière disponible

au moment de la publication. A la compagnie Kohler, nous aspirons à

remplir notre mission d’améliorer le niveau de vie gracieux pour

chaque individu affecté par nos produits et services. Nous nous

réservons le droit d’apporter des modiﬁcations aux caractéristiques,

aux emballages et à la disponibilité des produits à tout moment, et ce

sans préavis.

Veuillez prendre s’il vous plaît quelques minutes pour étudier ce

guide. En cas de problème d’installation ou de performance, veuillez

composer le 1-800-4-KOHLER (1-800-456-4537) à partir des É.U., et

Canada, ou le 001-877-680-1310 à partir du Mexique.

Avant de commencer

Couper l’alimentation d’eau principale.

Respecter tous les codes de plomberie et de bâtiment locaux.

La conception de la garniture illustrée dans ce guide est

représentative et pourrait différer de la garniture actuelle installée.

Installer la garniture tel qu’instruit.

Tournevis Clés

hexagonales

Kohler Co. Français-1 1041514-2-J

Avant de commencer (cont.)

Kohler Co. se réserve le droit d’apporter toutes modiﬁcations sur

le design des produits et ceci sans préavis, tel que spéciﬁé dans le

catalogue des prix.

Kohler Co. Français-2 1041514-2-J

1. Installer l’adaptateur de la tige de valve

REMARQUE : Vériﬁer la surface du mur ﬁni tel que lié aux

graphiques du renfort en plâtre.

Sélectionner la longueur correcte de l’adaptateur de la tige de

valve et la bonne vis de l’adaptateur de la tige de valve pour

votre application. Se référer à l’information estampillée sur le

renfort de plâtre pour vériﬁer l’épaisseur du mur.

Pour un mur ﬁn - 3/16″(5 mm) à 9/16″(1,4 cm):utiliser l’adaptateur

de tige de valve (le plus court) de 1/2″(1,3 cm), estampillé ″3″sur

le renfort de plâtre, et la vis de 13/16″(2,1 cm).

Pour un mur standard - de 9/16″(1,4 cm) à 1-1/16″(2.7 cm):utiliser

l’adaptateur de tige de valve (moyen) de 7/8″(2,2 cm), estampillé

″1″sur le renfort de plâtre. et la vis de 13/16″(2,1 cm).

Pour un mur épais - 1-1/16″(2,7 cm) à 1-9/16″(4 cm):utiliser

l’adaptateur de tige de valve (long) de 1-3/8″(3,5 cm), estampillé

″2″sur le renfort de plâtre, et la vis de 1-3/8″(3,5 cm).

Retirer et jeter le renfort en plâtre de l’unité de valve de transfert.

Placer l’adaptateur à cannelures sur la tige de la valve.

Placer l’adaptateur de la tige de valve approprié sur la tige de

valve. Ne pas complètement presser ou visser l’adaptateur de la

tige de valve en place avant d’en être instruit.

Retirer et jeter le renfort en plâtre.

Sélectionner l'adaptateur

de tige de valve correct.

Valve de

transfert

Adaptateur à

cannelures

Adaptateur de tige

de robinet

1041514-2-J Français-3 Kohler Co.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kohler Steuereinheit Handbücher

Kohler

Kohler ENGLEFIELD K-98095X Montageanleitung

Kohler

Kohler K-2977 Montageanleitung

Kohler

Kohler K-10673 Betriebsanleitung

Kohler

Kohler K-76746GL-NA Bedienungsanleitung

Kohler

Kohler 880A Bedienungsanleitung

Kohler

Kohler rada VZ1 10 Bedienungsanleitung

Kohler

Kohler K-10675 Betriebsanleitung

Kohler

Kohler 1190330-NA Bedienungsanleitung

Kohler

Kohler DTV+ Montageanleitung

Kohler

Kohler 28209W-NA Bedienungsanleitung

Kohler

Kohler K-10956 Betriebsanleitung

Kohler

Kohler K-19537P Bedienungsanleitung

Kohler

Kohler K-13516X Montageanleitung

Kohler

Kohler K-10675 Betriebsanleitung

Kohler

Kohler TOUCHLESS K-13686 Bedienungsanleitung

Kohler

Kohler BEAM K-77691K-G Bedienungsanleitung

Kohler

Kohler K-307 Bedienungsanleitung

Kohler

Kohler K-2971 Bedienungsanleitung

Kohler

Kohler K-8548 Bedienungsanleitung

Kohler

Kohler 28139T-DR Bedienungsanleitung

Kohler

Kohler AQUA TURBO 360 Bedienungsanleitung

Kohler

Kohler K-308 Bedienungsanleitung

Kohler

Kohler K-2975 Bedienungsanleitung

Kohler

Kohler K-10949 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung