Kohler GM93357-KP1-QS Bedienungsanleitung

INSTALLATION INSTRUCTIONS

TT-1633 6/16b

Original Issue Date: 6/14

Model: 24RCL, 30RCL, and 38RCLB

Market: Residential/Light Commercial

Subject: Oil Pan Heater Kits GM93357-KP1-QS and GM93357-KP2

Introduction

The oil pan heater warms the oil pan when the ambient

temperature falls below 4_C(40_F), making starting

easier and warmup quicker. See Figure 1 for heater kit

specifications.

The adhesive application of the oil pan heater allows for

a quick and easy installation. See Figure 2 for

illustrations of installed heater kits.

Note: The oil pan heater must be connected to a utility

power source.

Supply a utility power source for the oil pan heater if one

is not already available. See the drawings supplied with

the generator set for conduit/stub--up locations.

For the 120 VAC kit, the oil pan heater cord plugs into a

120 VAC receptacle. For the 240 VAC kit, the oil pan

heater cord connects directly to a 240 VAC power

source.

Read the entire installation procedure before beginning

installation. Perform the steps in the order shown.

Kit Number GM93357-KP1-QS GM93357-KP2

Voltage 120 VAC 240 VAC

Amps 1.3 0.6

Watts 150 150

Thermostat ON 4±4_C(40±7_F)

Thermostat OFF 16 ±3_C(60±5_F)

Figure 1 Heater Specifications

1. Cord

2. Ambient temperature sensor

3. Oil pan heater

GM93357

GM93357-KP1-QS GM93357-KP2

Figure 2 Oil Pan Heater (120 VAC and 240 VAC Shown)

2TT-1633 6/16

Safety Precautions

Observe the following safety precautions while installing

the kit.

Accidental starting.

Can cause severe injury or death.

Disconnect the battery cables before

working on the generator set.

Remove the negative (--) lead first

when disconnecting the battery.

Reconnect the negative (--) lead last

when reconnecting the battery.

WARNING

Disabling the generator set. Accidental starting can

cause severe injury or death. Before working on the

generator set or equipment connected to the set, disable the

generator set as follows: (1) Press the generator set off/reset

button to shut down the generator set. (2) Disconnect the

power to the battery charger, if equipped. (3) Remove the

battery cables, negative (--) lead first. Reconnect the negative

(--) lead last when reconnecting the battery. Follow these

precautions to prevent the starting of the generator set by the

remote start/stop switch.

Hazardous voltage.

Can cause severe injury or death.

Operate the generator set only when

all guards and electrical enclosures

areinplace.

Moving parts.

WARNING

Engine block heater. Hazardous voltage can cause

severe injury or death. The engine block heater can cause

electrical shock. Remove the engine block heater plug from

the electrical outlet before working on the block heater

electrical connections.

Hot engine and exhaust system.

Can cause severe injury or death.

Do not work on the generator set until

it cools.

WARNING

Servicing the engine oil pan heater. Heated components

can cause severe injury. The oil pan heater will rapidly

become hot when energized. Do not touch the oil pan heater

while it is hot. Disconnect power to the engine oil pan heater

and allow to cool before servicing it or nearby parts.

TT-1633 6/16 3

Installation Procedure

1.1 Remove the generator set from

service.

1. Press the OFF button on the generator set

controller.

2. Disconnect the utility power to the generator set.

3. Disconnect the generator set engine starting

battery, negative (--) lead first.

1.2 Install the oil pan heater.

Note: Center the oil pan heater on the bottom of the oil

pan with the pressure sensitive side adhered to

every surface in contact with the pad.

4. Determine where the oil pan heater will be installed

and clean the installation area with a non--oil based

solvent such as isopropyl alcohol or heptane.

5. Slowly peel the adhesive cover from the oil pan

heater.

6. Position and apply the heater pad to the bottom

surface of the oil pan.

Note: The heater pad should be between 21_C and 38_C

(70_F and 100_F) when applied to the oil pan.

7. To ensure a good adhesive bond, use a heat gun to

warm the heater pad. Apply pressure evenly to

remove any air pockets.

Note: To prevent damage, the power cord must not

touch any heated surfaces or moving

components. Ensure adequate clearance from

hot surfaces or moving parts.

8. Use the wire ties provided to secure the power cord

as needed and to provide strain relief. When

secured, ensure that the power cord does not

touch any hot surfaces or moving parts and provide

adequate clearance for the cord.

Note: To energize the oil pan heater, the oil pan heater

must be connected to a utility power source. See

the drawings supplied with the generator set for

conduit/stub--up locations.

9. Connect the oil pan heater to a power source. For

120 VAC kits, plug the cord into a 120 VAC

receptacle. For 240 VAC kits, connect the cord

leads to a 240 VAC power source. Do not touch the

oil pan heater when hot!

1.3 Restore the generator set to

service.

10. Reconnect the generator set engine starting

battery, negative (--) lead last.

11. Reconnect the utility power to the generator set.

4TT-1633 6/16

KOHLER CO., Kohler, Wisconsin 53044 USA

Phone 920-457-4441, Fax 920-459-1646

For the nearest sales and service outlet in the

US and Canada, phone 1-800-544-2444

KOHLERPower.com

Kohler Power Systems

Asia Pacific Headquarters

7 Jurong Pier Road

Singapore 619159

Phone (65) 6264-6422, Fax (65) 6264-6455

Oil Pan Heater Kit, 120 VAC

Kit: GM93357-KP1-QS

Qty. Description Part Number

1Heater, Oil Pan GM93424

1Assembly Drawing, Oil Pan Heater GM93357

1 Installation Instructions,

Oil Pan Heater

TT-1633

Oil Pan Heater Kit, 240 VAC

Kit: GM93357-KP2

Qty. Description Part Number

1Oil Pan Heater GM93486

1Assembly Drawing, Oil Pan Heater GM93357

1 Installation Instructions,

Oil Pan Heater

TT-1633

vailability is subject to change without notice. Kohler Co. reserves the

right to change the design or specifications without notice and without any

obligation or liability whatsoever. Contact your local Kohlerrgenerator

set distributor for availability.

Dieses Handbuch passt für folgende Modelle

Andere Kohler Tragbarer Generator Handbücher

Kohler

Kohler EKOZD Series Montageanleitung

Kohler

Kohler 18RESNT Bedienungsanleitung

Kohler

Kohler PRO 12.3 EFI Bedienungsanleitung

Kohler

Kohler 3.5RV Bedienungsanleitung

Kohler

Kohler 14/20RESA Bedienungsanleitung

Kohler

Kohler 15RYG Bedienungsanleitung

Kohler

Kohler 18RESL Bedienungsanleitung

Kohler

Kohler PRO 2.0 iS Bedienungsanleitung

Kohler

Kohler 30RCL Bedienungsanleitung

Kohler

Kohler 10CCOZ61 Bedienungsanleitung

Kohler

Kohler 7.5EOR Montageanleitung

Kohler

Kohler 5EKD-Low CO Bedienungsanleitung

Kohler

Kohler 15/20CCO Bedienungsanleitung

Kohler

Kohler 12.5 RV Bedienungsanleitung

Kohler

Kohler 9EKOZD Bedienungsanleitung

Kohler

Kohler 15CCO Bedienungsanleitung

Kohler

Kohler 15REYG Bedienungsanleitung

Kohler

Kohler 20EORZ Bedienungsanleitung

Kohler

Kohler PA-228578 Bedienungsanleitung

Kohler

Kohler 8.5RMY Kurzanleitung

Kohler

Kohler PRO 5.4 DES Bedienungsanleitung

Kohler

Kohler OnCue Plus Bedienungsanleitung

Kohler

Kohler Power Systems KD Series Bedienungsanleitung

Kohler

Kohler PRO6.4E Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

evertz

evertz 7700 Series Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung

Wallenstein

Wallenstein GF5000A Bedienungsanleitung

Leroy-Somer

Leroy-Somer LSA 49.1 Bedienungsanleitung

Yamakoyo

Yamakoyo SH2900DX Bedienungsanleitung

Craftsman

Craftsman 580.323611 Bedienungsanleitung