Kohler S-TRAP K-23188T-ITHC Bedienungsanleitung

FAMILY CARE

INSTALLATION INSTRUCTIONS

3.0/4.8L VITREOUS CHINA ONE PIECE TOILET

3.0/4.8

S-TRAP 305mm K-23188T-ITHC/K-23188T-HC

S-TRAP 400mm K-23189T-ITHC/K-23189T-HC

Please read these instructions carefully to familiarize

yourself with the required tools, materials, and installation

sequences. Follow the sections that pertain to your

particular installation. This will help you avoid costly

mistakes. In addition to proper installation, read all

operating and safety instructions.

All information in these instructions is based upon the

latest product information available at the time of

publication. Kohler China reserves the right to make

changes in product characteristics, packaging, or

availability at any time without notice.

These instructions contain important care, cleaning, and

warranty information -

please leave instructions for the

consumer

·-

ORDERING INFORMATION

Family Care Skirted 1PC 305mm

(Continuous Clean) W/O Seat .........................K-23188T-ITHC

Family Care Skirted 1PC 400mm

(Continuous Clean) W/O Seat .........................K-23189T-ITHC

Family Care Skirted 1PC 305mm

Seat ............................................................K-23188T-HC

Family Care Skirted 1PC 400mm

W/O Seat ............................................................K-23189T-HC

W/O

( )305mm( ) .......................K-23188T-ITHC

( )400mm( ) .......................K-23189T-ITHC

305mm

( )...........................................................K-23188T-HC

400mm

( )...........................................................K-23189T-HC

-1-

2020

No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137

2 528137

8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA 256410

8 256410

NO.1 KOHLER STREET, ECONOMIC DEVELOPMENT ZONE OF FAKU COUNTY, SHENYANG LIAONING PROVINCE, PRC 110400

1 110400

POST CODE:

NOTES

Observe all local plumbing and building codes.

Shut off the water supply.

Seat post holes are on 140mm centers.

Ensure that the new drain has the correct roughing-in

dimension. This toilet has a 305/400mm roughing-in

dimension. .

Closet flange must be 305/400mm on-center from wall.

Carefully inspect the new fixture for any sign of damage.

For new construction, refer to the dimensions in

for locating the shut-off valve.

See Roughing-in

installation step

140mm

305/400mm( )

305/400mm

Fixture dimensions are nominal and conform to tolerances

established by ASME Standards (A112.19.2-2018).

This product complies with Q/KCI-006-2018 and GB

25502-2017. Water Efficiency Grade 1.

ASME (A112.19.2-

2018)

Q/KCI-006-2018 GB 25502-2017

1397913-T01-B

-2-

TOOLS AND MATERIALS REQUIRED

(Not supplied)

254mm (10") adjustable wrench

305mm (12") pipe wrench

Metal file (file cut)

Tape measure

Tubing cutter

Level

Hacksaw

Putty knife

Screwdriver

Toilet gasket (wax seal)

Toilet T-bolts (2), 8mm (5/16") diameter

Toilet supply shut-off valve, 10mm(3/8 ) recommended

If the existing toilet does not have a supply shut-off

valve below the tank, install one before installing the new

toilet.

The flexible hose needed is supplied. The stop valve and wax

ring are not supplied.

NOTICE:

254mm

305mm

60cm

8mm T 2

10mm

WARNING: Risk of personal injury or product

damage

WARNING: Risk of external leakage

: Handle vitreous china products very carefully.

Vitreous china can break and chip if you overtighten

bolts and nuts.

. The fill valve

nut has been factory-tightened to design specifications.

If re-tightening is required, wrench tighten one turn

past finger tight .

Unit: mm

Reference Value

204

382

FRONT OF BOWL

Finished

Wall

Supply

OF OUTLET

378

700

395

305/400

229

200

748

299

286

Fig.#1

Kohler reserves the right to change marked dimensions without prior notice.

1397913-T01-B

-3-

TO REMOVE EXISTING TOILET

Turn off the water supply. Flush the toilet, and use a sponge

to remove the remaining water from the tank and bowl.

Disconnect the supply shut-off valve (if present), and remove

the old tank and bowl.

()

INSTALLATION

Fig.#2

Remove the old gasket from the floor

and the closet flange with a putty knife.

Remove the old T-bolts and discard

them.

if the new toilet is not

installed immediately, temporarily stuff

a rag into the closet flange.

NOTICE:

NOTICE: Do not use white cement or high lime content

cements to install this toilet. The expansion of cement due to

a rise in temperature may make the toilet crack or cause

damage. Kohler is not responsible for any damage caused by

installation with the use of cement.

Closet Flange

67mm;

229mm 200mm

Fig.#3

TO INSTALL SUPPLY

SHUT-OFF VALVE

Install the supply shut-off valve so it is

229mm above the finished floor line,

and 200mm to the left of the closet

flange centerline.

The centerline of the supply shut-off

valve outlet should extend 67mm from

the finished wall. Install the supply

shut-off valve with the outlet vertical.

Supply Shut-Off Valve

Closet Flange

Centerline

200

305/400

229

10mm

TO INSTALL BOWL

Position the template and align with drain hole.

Mark down the position of foot and 5 holes.

Drill holes on ground with the drill of 10mm (3/8"), then insert

anchor to holes.

CAUTION: Please make sure there is no water pipe or spool

under the 5 holes to be drilled.

Fig.#4

Fig.#5

Drain Hole

3/8

10mm

Install brackets.

Fig.#6

1397913-T01-B

-4-

Fig.#7

Firmly press the toilet gasket onto the

toilet outlet of plastic trap.

Wax ring type toilet gasket

should not be installed at temperatures

less than 21 C.

If you are using a toilet

gasket with an integral plastic sleeve,

make sure the gasket is positioned

with the sleeve facing away from the

toilet.

NOTE 1:

NOTE 2:

Plastic Trap Outlet

Toilet Gasket

Fig.#8

Install plastic to ground and mounted

with 3 set of bolts firmly.(not supplied)

)

NOTE: Must use the toilet installation

gasket ring (not supplied) to seal the

area where the waste pipe contacts

the construction section to avoid

leakage.

(

)

Thread the supply hose onto the fill valve shank. See Fig.#9 9

Fig.#9

Install the toilet seat according to the seat manufacturer's

installation instructions. See Fig.#10

Fig.#10

Insert the inlet hose of the toilet and the power line and inlet

hose of the bidet seat into the decorative cap. Insert the cap

firmly into the toilet. See Fig.#11

Fig.#11

Fig.#12

Carefully align and lower the bowl. Apply weight to the bowl

rim to let the outlet insert into plastic trap. See Fig.#12

Outlet

Plastic Trap

1397913-T01-B

-5-

Fig.#13

Carefully thread the screws into the brackets, until toilet is

secure. Alternately tighten left and right sides to prevent

pulling the toilet off center. Install cap to cover screw. See

Fig.#13

Do not overtighten.

Cap Screw

Bushing

Fig.#14

Apply caulk around base. See Fig.#14 14

TO CONNECT WATER

SUPPLY

* Flexible hose are recommended to

connect the supply line to the fill valve.

If you use a rigid connection (not

provided), take care not to apply side

forces to the bottom of the fill valve. Be

sure the rigid connection must be fit

with supply line completely to prevent

damage shank by forced connection.

(

)

Supply Shank*

Supply Shut-Off Valve

Fig.#15

IMPORTANT:

Make certain the top is turned to the locked

position. Valve may not turn on if top is not fully in the

locked position.

Before turning on the supply valve for the first

time, follow the steps below to clear sand, debris and rust

from the system:

Make sure water supply is off. Remove valve END by

rotating it 1/8 turn counterclockwise.

While holding a container over the uncapped VALVE to

prevent splashing, turn water supply on and off a few times.

Leave water supply off.

Replace END by engaging lugs and rotating 1/8 turn

clockwise.

Turn on water supply. Check that water level is at the marked

water line.

1/8

Fig.#16

FILL VALVE ADJUSTMENT

Fill float with ballast

Adjust the cam clockwise or counter-

clockwise until the water level is at the

marked water line.

Test flush the toilet.

Check all connections for leakage for

several days.

Set the tank cover in place on the tank.

1397913-T01-B

-6-

CONTINUOUS CLEAN

For

1. Install and connect the CONTINUOUS CLEAN.

K-23188T-ITHC/K-23189T-ITHC

()

K-23188T-ITHC/K-23189T-ITHC

1. ( )

Fig.#17

Refer to the illustration on

the right for the positions

of refill tube, fill valve,

flush valve and bowl

cleaner.

Place to connect the water refill tube

Refer to the illustration on

the right for structure of

flush valve.

Turn off

Turn on

Lift the cover

upward.

Unpack the toilet

bowl cleaner and

place it into the

container.

Close the container

and recheck the

connection of the

water supply pipe.

Fig.#18

2. Function of the selection switch. 2.

Switch is on

Water flows through the toilet bowl cleaner container and

carries water therein into the toilet.

Switch is off

Water directly flows into the toilet without passing

through the toilet bowl cleaner container.

3. Toilet bowl cleaner replacement. 3.

Lift the tank cover and move it aside as illustrated.

The tank cover can not be completely removed because of

the steel wire connecting it with the flush valve.

Refer to the instructions on Fig.#22 for removal of tank cover.

Note:

Rotate the handle in the

direction of the arrow.

Fig.#19

1397913-T01-B

4. Caution:

The toilet bowl cleaner is corrosive and is fatal if

swallowed.

Wear plastic gloves when using the toilet bowl cleaner.

Store the toilet bowl cleaner out of reach of children.

Flush eyes, skin or clothes for 15 minutes immediately

upon contact with the toilet bowl cleaner.

If Swallowed: Call poison control center or doctor

immediately for treatment advice. Have person sip a glass

of water if able to swallow. Do not induce vomiting unless

told to do so by a poison control center or doctor.

Keep away from heat or flame.

Refill the toilet bowl cleaner immediately after it is

completely dissolved to guarantee the effect.

Use the free toilet bowl cleaner inside, or replace with similar

products less than the size of 70(H)*70(W)*25(H)mm.

70( )*70

( )*25( )mm

-7-

PUSH BUTTON INSTALLATION

NOTE: Remove the package and screw out the nut. Make the

button through the tank cover as shown. Be noted that the

button shall be kept level. Arrange big and small flush buttons

according to the label of water consumption on the tank.

Tighten the nut from beneath the tank cover.

Fig.#20

TANK COVER INSTALLATION

Note: Press down the spring and insert the button into the

installation position on the tank cover. Release the spring to

lock it. Be noted not to let the steel wire of the flush valve

resting on the lever of the fill valve.

Button Box

Fig.#21

1397913-T01-B

-8-

REMOVE THE TANK COVER

Note: Press down the spring to remove the box and separate

it from the tank cover.

Spring

Press down the spring

Fig.#22

FITTINGS AND RELATIVE POSITION IN

TANK

Caution:

Restore the moved or removed parts according to the

positions and directions as shown.

Pay attention to the position and angle of the float canister to

avoid interfere with the steel wire on the box.

For K-23188T-HC/K-23189T-HC

K-23188T-HC/K-23189T-HC

For K-23188T-ITHC/K-23189T-ITHC

K-23188T-ITHC/K-23189T-ITHC

Fill Valve Fill Valve

Flush Valve Flush Valve

Push Button Push Button

Continuous Clean Assy

Float Canister Float Canister

Button Box Button Box

Fig.#23

Fig.#25

Fig.#24

Steel Wire Steel Wire

QUICK REMOVAL AND INSTALLATION

For

Quick Removal

Turn off water supply. Squeeze downward the blue part on

the fill valve base with one hand or non-sharp tools and

remove the fill valve by lifting it with the other hand. See

Fig.25.

K-23188T-ITHC/K-23189T-ITHC K-23188T-ITHC/K-23189T-ITHC

Valve Base

Fill Valve

1397913-T01-B

-9-

SYMPTOMS CORRECTIVE ACTION

1. Poor Flush A. Adjust the tank water level to match the waterline.

B. Fully open the water supply shut-off valve.

C. Clear obstructions from the trapway, jet, or bowl rim holes.

D. Clear obstructions from the waste line.

A. Adjust the chain for proper slack so the seal is not held off the flush valve seat.

B. Clean or replace the seal if it is worn, dirty, or misaligned with the flush valve seat, or

if the flush valve seat is damaged. Replace the flush valve seal or flush valve.

C. Clean the fill valve seat/seat washer of debris, or replace the piston/seat washer

assembly.

D. Remove the tank and tighten the flush valve nut if flush valve gasket is leaking. Do

not overtighten. If leakage continues, replace the gasket.

E. Adjust the tank water level if it is too high.

2. No Flush

IMPORTANT: Use only genuine Kohler parts as shown to avoid property damage.

4. Tank takes excessive time to fill.

5. There is excessive noise when the

tank is filling.

3. The fill valve turns on/off by itself

without the toilet being flushed, or it

runs allowing water to enter the tank.

A. Reconnect the chain to the trip lever or flush valve.

B. Adjust the chain assembly to remove excessive slack.

A. Fully open the water supply shut-off valve.

B. Clean the valve inlet, valve head, or supply line. Flush the lines.

A. Partially close the water supply shut-off valve if the water pressure to the toilet is too

high. Check the toilet performance following any such adjustment.

B. Remove dirt or obstructions from the valve head. Flush the lines.

Fig.#26

Quick Installation

Squeeze downward the blue part on the fill valve base with

one hand or non-sharp tools to make sure it is ready for

assembly. See Fig.26. Confirm the direction of the float

canister and then insert the fill valve into the valve base until

it cannot be pushed any further with a 'clicking' sound. See

Fig.23. Turn on water supply and flush several times to check

for leakage.

26 23

Not Ready

For Assemble

Ready For

Assemble

1397913-T01-B

()

CONSUMER RESPONSIBILITIES

If you live in a hard water area, make certain that the holes in

the toilet rim are kept clean to ensure proper bowl flushing.

Toilet bowl cleaners should be used at least once a week.

Use a long-handled brush to clean the rim holes, and to clean

as far into the trap as possible to prevent mineral deposits

from forming.

Most toilet bowl cleaners are not harmful to the vitreous china

surface of the toilet bowl. Please follow the bowl cleaner

manufacturer's instructions carefully.

Do not use corrosive detergent or solvent in the tank. It is

recommended to use Continuous Clean Assembly for the

cleaning of tank and protection of valves.

Do not use corrosive in-tank cleaners. Products

containing chlorine (calcium hypochlorite) can

seriously damage fittings in the tank. This damage can

cause leakage and property damage.

Kohler Company shall not be responsible or liable for any

damage to these tank fittings caused by the use of corrosive

cleaners containing chlorine (calcium hypochlorite).

WARNING: Risk of property or product damage.

CAUTION: Don t use any cement while installing

the toilet.

WARNING: Risk of product damage.

CAUTION:

Heat expansion of the toilet may damage

the feet of the toilet. Kohler will not be responsible for

any damage because of using cement.

Do not throw into the toilet what is easy to block it,

such as newspaper, paper pilch, sanitary towel.

Do not bump the vitreous china with great force to

prevent it from damaging and leaking.

Do not use the product in the water below 0 C.

Please do not use hard materials (like

scouring pad) to clean product surface, especially the

product logo.

-10-

1. A.

C. /

3. /

2. A.

4. A.

5. A.

1397913-T01-B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kohler Toilette Handbücher

Kohler

Kohler Hyten K-25875 Bedienungsanleitung

Kohler

Kohler K-3723 Montageanleitung

Kohler

Kohler CIMARRON K-5697T-TFC Bedienungsanleitung

Kohler

Kohler OVE K-17629T-2 Bedienungsanleitung

Kohler

Kohler REVE K-24766T-S Bedienungsanleitung

Kohler

Kohler K-3489 Series Montageanleitung

Kohler

Kohler K-29918T-NSHC Bedienungsanleitung

Kohler

Kohler ESCALE K-24838T-S Bedienungsanleitung

Kohler

Kohler WELLWORTH K-5778T Bedienungsanleitung

Kohler

Kohler WELLWORTH LITE K-3420 Bedienungsanleitung

Kohler

Kohler K-11471 Montageanleitung

Kohler

Kohler Escale K-25091T-S Bedienungsanleitung

Kohler

Kohler ADAIR K-5171T-M Bedienungsanleitung

Kohler

Kohler TRESHAM K-3854T Bedienungsanleitung

Kohler

Kohler K-77780 Bedienungsanleitung

Kohler

Kohler K-4026T Bedienungsanleitung

Kohler

Kohler K-3398 Bedienungsanleitung

Kohler

Kohler K-5724K Bedienungsanleitung

Kohler

Kohler Stanwell K-4972-ER Bedienungsanleitung

Kohler

Kohler K-25737X-C Montageanleitung

Kohler

Kohler Veil K-5402T Bedienungsanleitung

Kohler

Kohler ADAIR K- 5171T-ITSE Bedienungsanleitung

Kohler

Kohler K-5889X Montageanleitung

Kohler

Kohler K-8423A-0 Montageanleitung

Beliebte Toilette Handbücher anderer Marken

Toto

Toto Washlet TCF4911 Series Bedienungsanleitung

Grohe

Grohe Sensia ARENA Bedienungsanleitung

Geberit

Geberit AQUACLEAN MERA CLASSIC Bedienungsanleitung

Better Bathrooms

Better Bathrooms BUN/BeBa 27555/78725 Bedienungsanleitung

American Standard

American Standard CONCEPT Cube TF-2704 Bedienungsanleitung

BIOLAN

BIOLAN ECO Stücklistenhandbuch

Thetford

Thetford C260 Series Bedienungsanleitung

KELISS

KELISS T162A Series Bedienungsanleitung

BIOLAN

BIOLAN GARDEN TOILET Stücklistenhandbuch

washloo

washloo Prestige Bedienungsanleitung

JABSCO

JABSCO 37010 Series Bedienungsanleitung

Olympia

Olympia EPOQUE 69209 Bedienungsanleitung

DENCK

DENCK PURE-D Bedienungsanleitung

Silent Venus

Silent Venus SVP600 Wartungs- und Serviceanleitung

InBe

InBe IB/04.06050 Bedienungsanleitung

Swiss Madison

Swiss Madison Carré SM-1T264 Bedienungsanleitung

agape

agape PEAR 2 Bedienungsanleitung

Roca

Roca DAMA SENSO COMPACT Bedienungsanleitung